많은 시간과 돈이 필요 없습니다. 30분이란 특별학습가이드로 여러분은IBM A2090-550인증시험을 한번에 통과할 수 있습니다, ITExamDump에서IBM A2090-550시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷한 덤프만 제공합니다.
IBM인증A2090-550시험덤프공부자료는ITExamDump제품으로 가시면 자격증취득이 쉬워집니다. ITExamDump에서 출시한 IBM인증A2090-550덤프는 이미 사용한 분들에게 많은 호평을 받아왔습니다. 시험적중율 최고에 많은 공부가 되었다고 희소식을 전해올때마다 ITExamDump는 더욱 완벽한IBM인증A2090-550시험덤프공부자료로 수정하고기 위해 최선을 다해왔습니다. 최고품질으IBM인증A2090-550덤프공부자료는ITExamDump에서만 찾아볼수 있습니다.
시험 번호/코드: A2090-550
시험 이름: IBM (Assessment: IBM solidDB and IBM solidDB Universal Cache)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 122 문항
업데이트: 2014-03-31
ITExamDump의 연구팀에서는IBM A2090-550인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드IBM A2090-550덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에IBM A2090-550이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이IBM A2090-550시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.
ITExamDump덤프공부가이드는 업계에서 높은 인지도를 자랑하고 있습니다. ITExamDump제품은 업데이트가 가장 빠르고 적중율이 가장 높아 업계의 다른 IT공부자료 사이트보다 출중합니다. ITExamDump의IBM인증 A2090-550덤프는 이해하기 쉽고 모든IBM인증 A2090-550시험유형이 모두 포함되어 있어 덤프만 잘 이해하고 공부하시면 시험패스는 문제없습니다.
ITExamDump 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 알 맞춤한 퍼펙트한 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편하게 인증시험을 패스할 수 있습니다.많은 it인증관연 응시자들은 우리 ITExamDump가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 ITExamDump 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.
A2090-550 덤프무료샘플다운로드하기: http://www.itexamdump.com/A2090-550.html
NO.1 To administer a HotStandby database you need which privilege?
A. Sys_Sync_Admin_Role
B. Sys_Console_Role
C. Sys_Hotstandby_Role
D. Sys_Replication_Role
Answer: B
IBM dump A2090-550 A2090-550 A2090-550
NO.2 You have setup solidDB Universal Cache such that you have a table DBA.ORG in the
solidDB
front-end, being mirrored to a back-end database. After some time, you notice that the
subscription is Inactive and you try to start Mirroring (Continuous). The subscription state
remains
Inactive and the Event Log shows that the structure of table DBA.ORG has changed. What is
the
recommended course of action?
A. In solidDB, drop the ORG table and recreate it; then restart the subscription.
B. In the backend database, drop the ORG table and recreate it; then restart the subscription.
C. In solidDB, change the table definition to what it was previously; then restart the
subscription.
D. In the Management Console, use the 'Update table definition' option, for the source in the
Table
Mappings area; then restart the subscription.
Answer: D
IBM A2090-550시험문제 A2090-550
NO.3 When setting the [HotStandby]SafenessLevel = Auto, which two statements are true
about
transaction durability and HotStandby safeness level? (Choose two.)
A. SafenessLevel switches to 1-safe when using [Logging]DurabilityLevel = 1(Relaxed).
B. SafenessLevel switches to 2-safe when using [Loggng]DurabilityLevel = 2(Adaptive).
C. SafenessLevel switches to 1-safe when using [Logging]DurabilityLevel = 3(Strict).
D. SafenessLevel switches to 2-safe when using [Logging]DurabiltyLevel = 4(Custom).
E. SafenessLevel switches to 1-safe when using [Logging]DurabiltyLevel = 2(Adaptive).
Answer: A,B
IBM A2090-550최신덤프 A2090-550 dump A2090-550
NO.4 What are two possible conflict resolution methods between solidDB and a back-end
database?
(Choose two.)
A. Source wins
B. Reference
C. Trigger
D. UserExit
E. Alert user
Answer: A,D
IBM인증 A2090-550인증 A2090-550
NO.5 What are two effective ways to increase the throughput of replication between the
solidDB in-
memory cache and a back-end database? (Choose two.)
A. Add a summarization column to the source.
B. Use multiple subscriptions instead of just one.
C. Update the mirror_commit_after_max_transactions parameter to a higher value.
D. Ensure that the conflict resolution mechanism is set to "source".
E. Use only the Mirror (Continuous) form of replication.
Answer: B,C
IBM시험문제 A2090-550 A2090-550 A2090-550자격증 A2090-550
NO.6 Click the Exhibit button.
In the exhibit, what does the attached replication diagram show?
A. All subscriptions are Mirroring Continuous.
B. The subscription FERO_BERW is Inactive.
C. The subscription FERO_BERW is Mirroring Continuous.
D. All subscriptions are using bidirectional Mirroring Continuous.
Answer: C
IBM A2090-550 dump A2090-550
NO.7 What is the correct setup topology when deploying IBM solidDB Universal Cache in
conjunction
with IBM solidDB High Availability (HotStandby) functionality?
A. CDC for solidDB instances are running on both the Primary node and on the Secondary
node,
each CDC instance locally connecting to one solidDB server.
B. CDC for solidDB instance is running on the back-end node, remotely connecting to both
Primary and Secondary solidDB servers.
C. CDC for solidDB instance is running on the back-end node, remotely connecting to the
Primary
server. Connection to the Secondary server is managed using Advanced Replication.
D. CDC for solidDB instance is running on the Primary node, locally connecting to the
Primary
server. Connection to the Secondary server is managed by transparent failover.
Answer: B
IBM시험문제 A2090-550 A2090-550
NO.8 To set up solidDB in a standalone, HotStandby or Universal Cache configuration,
where can the
configuration be performed?
A. The configuration is performed from the command line using the solid command with
suitable
option settings and values.
B. The configuration needs to be set in a solid.ini file.
C. The configurations can be set up by using the solsql tool and the operating system
services file.
D. The standalone configuration is set in the solid.ini file while the HotStandby and Universal
Cache configuration is set using the sqlcon tool.
Answer: B
IBM자료 A2090-550 A2090-550 A2090-550 pdf
NO.9 Which statement regarding IBM solidDB Netbackup is true?
A. One IBM solidDB Netbackup Server can only serve one backup source server.
B. The command ADMIN COMMAND 'netbackup' is supported within the [Srv]At
configuration
parameter.
C. NetBackup copies logical database consisting of multiple files to one flat file to the
NetBackupDirectory by default.
D. If the specified remote directory does not exist, it is not created automatically by the
solidDB
Netbackup Server.
Answer: C
IBM기출문제 A2090-550자료 A2090-550시험문제 A2090-550
NO.10 How many different installations of solidDB binaries can exist on the same host?
A. one
B. as many as can fit
C. one per release of solidDB
D. one per version of solidDB
Answer: B
IBM dump A2090-550 A2090-550 pdf A2090-550시험문제 A2090-550 dump A2090-550
NO.11 To execute the admin command "status", what is the correct syntax?
A. solsql -e "COMMAND 'status' " "tcp 1313" dba dba
B. solsql -f "ADMIN STATUS 'status' " "tcp 1313" dba dba
C. solcon "status" "tcp 1313" dba dba
D. solcon -e "status" "tcp 1313" dba dba
Answer: D
IBM A2090-550 A2090-550최신덤프
NO.12 A solidDB disk-based database instance has been optimally running for six months and
starts to
experience major degradation in performance. Upon executing an overall DB status report
using ADMIN
COMMAND "status", it is noted that the value for index writes after last merge is at
20945876. Why would this be a probable cause of the performance degradation?
A. A large value for this counter signifies that the creation of indices, after a large batch insert
process, has been halted leading to excessive memory usage which can cause serious
performance issues.
B. A large value for this counter signifies that a large number of transactions are being
checkpointed which can cause serious performance issues.
C. A large value for this counter signifies that the multi-versioning storage tree is not being
flushed
to disk due to a long running transaction which can cause serious performance issues.
D. A large value for this counter signifies that a transaction performing a merge-join is
utilizing a
large amount of memory causing potential process paging/swapping leading to serious
performance issues.
Answer: C
IBM덤프 A2090-550 dumps A2090-550 dumps A2090-550
NO.13 Which two are directly visible in solidDB server-side SQL Tracing? (Choose two.)
A. longest lasting statements in duration order
B. timestamps of statement preparation
C. timestamps of individual fetch operations
D. timestamps of individual rpc_session operations.
E. list of statements currently under execution
Answer: B,C
IBM기출문제 A2090-550자격증 A2090-550
NO.14 What are two possible reasons for high latency between a solidDB in-memory cache
and a back-end
database? (Choose two.)
A. Insufficient network bandwidth for the volume of transactions that are being processed.
B. The network connection between the solidDB in-memory cache and the back-end
database is
down.
C. There is database lock contention on the target database.
D. The CDC instances are stopped.
E. Table mappings are not configured properly.
Answer: A,C
IBM최신덤프 A2090-550시험문제 A2090-550자료
NO.15 What are two methods for generating a trace file containing database statement
executions
occurring in the solidDB server? (Choose two.)
A. Enable SQL tracing within the solidDB server.
B. Enable ODBC tracing within the solidDB ODBC driver.
C. Enable ODBC tracing within the ODBC Driver Manager.
D. Enable JDBC tracing within the solidDB JDBC driver.
E. Enable JDBC tracing within the JDBC Driver Manager.
Answer: A,C
IBM A2090-550 A2090-550 A2090-550기출문제
NO.16 It is possible when using solsql to run scripts either interactively or nested within
another script.
Which special character is used to identify that you want to execute a script file?
A. &
B. @
C. #
D. !
Answer: B
IBM dump A2090-550덤프 A2090-550자료 A2090-550 A2090-550자격증
NO.17 To execute the HotStandby administrative commands, which type of access privilege
would be
needed?
A. SYS_ADMIN_SYNC_ROLE
B. SYNC_ADMIN_ROLE
C. ADMIN_CONSOLE_ROLE
D. SYS_CONSOLE_ROLE
Answer: D
IBM인증 A2090-550 A2090-550
NO.18 To set the transaction log retention space size for solidDB Universal Cache in the
solidDB
configuration file (solid.ini), which parameter is used?
A. [LogReader]
MaxLogSize
B. [Com]
ReadBufSize
C. [Hotstandby]
MaxMemLogSize
D. [indexFile]
CacheSize
Answer: A
IBM자격증 A2090-550 A2090-550 pdf
NO.19 Which software components must be installed to deploy IBM solidDB Universal Cache
and provide
access to data residing in an IBM DB2 database?
A. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC for DB2,
IBM
InfoSphere CDC Access Server, and IBM InfoSphere CDC Management Console
B. IBM solidDB, IBM DB2, IBM Universal Cache for DB2,IBM InfoSphere CDC Replication
Center,
and IBM InfoSphere CDC Management Console
C. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC Access
Server,
and IBM InfoSphere CDC Management Console
D. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC for DB2,
IBM
InfoSphere CDC Replication Center, and IBM InfoSphere CDC Management Console
Answer: A
IBM A2090-550 A2090-550 dumps A2090-550자료
NO.20 After completing the upgrade of the Primary server while performing a cold HSB-
incompatible
upgrade, what is the correct sequence of steps to upgrade to the Secondary server?
A. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ACTIVE
state;
perform a 'hsb connect' command to resynchronize the servers and restore to normal
operation.
B. Upgrade both servers; start and verify that the upgrade Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ACTIVE
state;
perform a 'hsb netcopy' command followed by 'hsb connect' to resynchronize the servers and
restore to normal operation.
C. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ACTIVE state; start the Secondary server and verify that it is in a SECONDARY ALONE
state;
perform a 'hsb connect' command to resynchronize the servers and restore to normal
operation.
D. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ALONE
state;
perform a 'hsb netcopy' command followed by 'hsb connect' to resynchronize the servers and
restore to normal operation.
Answer: D
IBM자료 A2090-550기출문제 A2090-550자격증 A2090-550인증
ITexamdump의 MB5-854덤프의 VCE테스트프로그램과 MB6-700덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-332시험에 대비한 고품질 덤프와 350-029시험 최신버전덤프를 제공해드립니다. 최고품질 NS0-156시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기