ITExamDump는 모든 IT관련 인증시험자료를 제공할 수 있는 사이트입니다. 우리ITExamDump는 여러분들한테 최고 최신의 자료를 제공합니다. ITExamDump을 선택함으로 여러분은 이미IIA IIA-CIA-Part3시험을 패스하였습니다. 우리 자료로 여러분은 충분히IIA IIA-CIA-Part3를 패스할 수 있습니다. 만약 시험에서 떨어지셨다면 우리는 백프로 환불은 약속합니다. 그리고 갱신이 된 최신자료를 보내드립니다. 하지만 이런사례는 거이 없었습니다.모두 한번에 패스하였기 때문이죠. ITExamDump는 여러분이IIA IIA-CIA-Part3인증시험 패스와 추후사업에 모두 도움이 되겠습니다. Pass4Tes의 선택이야말로 여러분의 현명한 선택이라고 볼수 있습니다. Pass4Tes선택으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트버전을 바을수 있는 기회를 얻을수 있습니다.
연구결과에 의하면IIA인증 IIA-CIA-Part3시험은 너무 어려워 시험패스율이 낮다고 합니다. ITExamDump의 IIA인증 IIA-CIA-Part3덤프와 만나면IIA인증 IIA-CIA-Part3시험에 두려움을 느끼지 않으셔도 됩니다. ITExamDump의 IIA인증 IIA-CIA-Part3덤프는 엘리트한 IT전문가들이 실제시험을 연구하여 정리해둔 퍼펙트한 시험대비 공부자료입니다. 저희 덤프만 공부하시면 시간도 절약하고 가격도 친근하며 시험준비로 인한 여러방면의 스트레스를 적게 받아IIA인증 IIA-CIA-Part3시험패스가 한결 쉬워집니다.
ITExamDump의 IIA인증 IIA-CIA-Part3덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 IIA인증 IIA-CIA-Part3덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희IIA인증 IIA-CIA-Part3덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
ITExamDump의IIA인증 IIA-CIA-Part3덤프는 고객님의 IT인증자격증을 취득하는 소원을들어줍니다. IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. ITExamDump의IIA인증 IIA-CIA-Part3덤프는 실제 시험문제에 대비하여 연구제작된 퍼펙트한 시험전 공부자료로서 시험이 더는 어렵지 않게 느끼도록 편하게 도와드립니다.
시험 번호/코드: IIA-CIA-Part3
시험 이름: IIA (Certified Internal Auditor - Part 3 study guide with online review)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 1554 문항
업데이트: 2014-04-16
ITExamDump는 전문적인 IT인증시험덤프를 제공하는 사이트입니다.IIA-CIA-Part3인증시험을 패스하려면 아주 현병한 선택입니다. ITExamDump에서는IIA-CIA-Part3관련 자료도 제공함으로 여러분처럼 IT 인증시험에 관심이 많은 분들한테 아주 유용한 자료이자 학습가이드입니다. ITExamDump는 또 여러분이 원하도 필요로 하는 최신 최고버전의IIA-CIA-Part3문제와 답을 제공합니다.
IIA-CIA-Part3 덤프무료샘플다운로드하기: http://www.itexamdump.com/IIA-CIA-Part3.html
NO.1 Which of the following costs of quality is a failure cost?
A. Systems development costs.
B. Costs of inspecting in-process items.
C. Contract penalty for delivery of nonconforming goods.
D. Costs of quality circles.
Answer: C
IIA dumps IIA-CIA-Part3 IIA-CIA-Part3 IIA-CIA-Part3인증
Explanation:
Failure costs are incurred after defective output has been removed from production. A contract
penalty for faulty goods is an example of an external failure cost.
NO.2 Focusing on customers, promoting innovation, learning new philosophies, driving out fear, and
providing extensive training are all elements of a major change in organizations. These elements are
aimed primarily at:
A. Copying leading organizations to better compete with them.
B. Focusing on the total quality of products and services.
C. Being efficient and effective at the same time, in order to indirectly affect profits.
D. Managing costs of products and services better, in order to become the low-cost provider.
Answer: B
IIA자격증 IIA-CIA-Part3 IIA-CIA-Part3자료 IIA-CIA-Part3자료 IIA-CIA-Part3
Explanation:
TQM is a comprehensive approach to quality. It treats the pursuit of quality as a basic organizational
function that is as important as production or marketing. TQM is the continuous pursuit of quality in
every aspect of organizational activities through (1) a philosophy of doing it right the first time; (2)
employee training and empowerment; (3) promotion of teamwork; (4) improvement of processes;
and (5) attention to satisfaction of customers, both internal and external. TQM emphasizes the
supplier's relationship with the customer, identifies customer needs, and recognizes that everyone
in a process is at some time a customer or supplier of someone else, either inside or outside of the
organization.
NO.3 Which statement best describes total quality management (TQM)?
A. TQM emphasizes reducing the cost of inspection.
B. TQM emphasizes better statistical quality control techniques.
C. TQM emphasizes doing each job right the first time.
D. TQM emphasizes encouraging cross-functional teamwork.
Answer: C
IIA자료 IIA-CIA-Part3 IIA-CIA-Part3최신덤프 IIA-CIA-Part3자격증 IIA-CIA-Part3
Explanation:
TQM establishes quality as an organizational objective and views it as a major component of the
organization's service to its customers. It emphasizes employee training and commitment,
productservice design and production, and customer service. Ordinarily, the quality of a product or
service is as important to customers as cost and timeliness. Superior product quality is not merely
the result of more inspection, better statistical quality control, and cross-functional teamwork.
Manufactures must make fundamental changes in the way they produce products and do each job
right the first time.
NO.4 In which of the following organizational structures does total quality management (TQM) work
best?
A. Hierarchal.
B. Teams of people from the same specialty.
C. Teams of people from different specialties.
D. Specialists working individually.
Answer: C
IIA시험문제 IIA-CIA-Part3최신덤프 IIA-CIA-Part3 IIA-CIA-Part3 pdf IIA-CIA-Part3
Explanation:
TQM advocates replacement of the traditional hierarchal structure with teams of people from
different specialties. This change follows from TQM's emphasis on empowering employees and
teamwork. Employees should (1) have proper training, necessary information, and the best tools;
(2) be fully engaged in the decision process; and (3) receive fair compensation. If such empowered
employees are assembled in teams of individuals with the required skills, TQM theorists believe
they will be more effective than people performing their tasks separately in a rigid structure.
NO.5 All of the following are generally included in a cost-of-quality report except:
A. Warranty claims.
B. Design engineering.
C. Supplier evaluations.
D. Lost contribution margin.
Answer: D
IIA시험문제 IIA-CIA-Part3 IIA-CIA-Part3기출문제
Explanation:
A cost-of-quality report includes most costs related to quality, specifically the costs of prevention,
appraisal, internal failure, and external failure.
11. Which of the following is not an appropriate measure of quality?
A. Market share.
B. Delivery performance.
C. Customer satisfaction.
D. Raw materials costs.
Answer: D
IIA인증 IIA-CIA-Part3자료 IIA-CIA-Part3 dumps IIA-CIA-Part3최신덤프 IIA-CIA-Part3
Explanation:
Emphasizing lower input costs may result in more defective output, and higher input costs may or
may not reflect the procurement of better raw materials. Financial measures are thus mostly
unsuitable for measuring quality.
12. One of the main reasons that implementation of a total quality management (TQM) program
works better through the use of teams is:
A. Teams are more efficient and help an organization reduce its staffing.
B. Employee motivation is always higher for team members than for individual contributors.
C. Teams are a natural vehicle for sharing ideas, which leads to process improvement.
D. The use of teams eliminates the need for supervision, thereby allowing a company to reduce
staffing.
Answer: C
IIA IIA-CIA-Part3 dumps IIA-CIA-Part3자료 IIA-CIA-Part3덤프
Explanation:
TQM promotes teamwork by modifying or eliminating traditional (and rigid) vertical hierarchies and
instead forming flexible groups of specialists. Quality circles, cross-functional teams, and
self-managed teams are typical formats. Teams are an excellent means of encouraging the sharing
of ideas and removing process improvement obstacles.
13. If a company is customer-centered, its customers are defined as:
A. Only people external to the company who have purchased something from the company.
B. Only people internal to the company who directly use its product.
C. Anyone external to the company and those internal who rely on its product to get their job done.
D. Everybody external to the company who is currently doing, or may in the future do, business with
the company.
Answer: C
IIA인증 IIA-CIA-Part3 IIA-CIA-Part3 IIA-CIA-Part3
Explanation:
One of the principles of total quality management (TQM) is customer orientation, whether the
customer is internal or external. An internal customer is a member of the organization who relies on
another member's work to accomplish his/her task.
14. Management of a company is attempting to build a reputation as a world-class manufacturer
of quality products. Which of the following measures would not be used by the firm to measure
quality?
A. The percentage of shipments returned by customers because of poor quality.
B. The number of parts shipped per day.
C. The number of defective parts per million.
D. The percentage of products passing quality tests the firsttime
Answer: B
IIA최신덤프 IIA-CIA-Part3 pdf IIA-CIA-Part3덤프
Explanation:
The number of parts shipped per day would most likely be used as a measure of the effectiveness
and efficiency of shipping procedures, not the quality of the product. This measure does not
consider how many of the parts are defective.
15. Quality costing is similar in service and manufacturing organizations. Nevertheless, the
differences
between these organizations have certain implications for quality management. Thus,
A. Direct labor costs are usually a higher percentage of total costs in manufacturing organizations.
B. External failure costs are relatively greater in service organizations.
C. Quality improvements resulting in more efficient use of labor time are more likely to be accepted
by employees in service organizations.
D. Poor service is less likely to result in loss of customers than a faulty product.
Answer: B
IIA시험문제 IIA-CIA-Part3덤프 IIA-CIA-Part3자료 IIA-CIA-Part3
Explanation:
External failure costs arise when problems occur after delivery. They occur because products or
services are nonconforming or otherwise do not satisfy customers. External failure costs in service
enterprises are even more important than in manufacturing environments. Faulty goods sometimes
maybe reworked or replaced to a customer's satisfaction, but poor service tends to result in a loss of
customers.
16. A means of limiting production delays caused by equipment breakdown and repair is to:
A. Schedule production based on capacity planning.
B. Plan maintenance activity based on an analysis of equipment repair work orders.
C. Pre-authorize equipment maintenance and overtime pay.
D. Establish a preventive maintenance program for all production equipment.
Answer: D
IIA인증 IIA-CIA-Part3자격증 IIA-CIA-Part3 pdf IIA-CIA-Part3
Explanation:
A preventive maintenance program reduces equipment breakdowns and repairs.
17. Under a total quality management (TQM) approach,
A. Measurement occurs throughout the process, and errors are caught and corrected at the source.
B. Quality control is performed by highly trained inspectors at the end of the production process.
C. Upper management assumes the primary responsibility for the quality of the products and
services.
D. A large number of suppliers are used in order to obtain the lowest possible prices.
Answer: A
IIA IIA-CIA-Part3자격증 IIA-CIA-Part3 IIA-CIA-Part3 IIA-CIA-Part3최신덤프
Explanation:
TQM emphasizes quality as a basic organizational function. TQM is the continuous pursuit of quality
in every aspect of organizational activities. One of the basic principles of TQM is doing it right the
first time. Thus, errors should be caught and corrected at the source.
18. Which of the following is a key to successful total quality management (TQM)?
A. Training quality inspectors.
B. Focusing intensely on the customer.
C. Creating appropriate hierarchies to increase efficiency.
D. Establishing a well-defined quality standard, then focusing on meeting it.
Answer: B
IIA최신덤프 IIA-CIA-Part3덤프 IIA-CIA-Part3최신덤프 IIA-CIA-Part3최신덤프
Explanation:
TQM emphasizes satisfaction of customers, both internal and external. TQM considers the supplier's
relationship with the customer, identifies customer needs, and recognizes that everyone in a
process is at some time a customer or supplier of someone else, either inside or outside of the
organization. Thus, TQM begins with external customer requirements, identifies internal
customer-supplier relationships and requirements, and establishes requirements for external
suppliers.
19. The four categories of costs associated with product quality costs are:
A. External failure, internal failure, prevention, and carrying.
B. External failure, internal failure, prevention, and appraisal.
C. External failure, internal failure, training, and appraisal.
D. Warranty, product liability, training, and appraisal.
Answer: B
IIA자료 IIA-CIA-Part3 IIA-CIA-Part3 IIA-CIA-Part3 pdf
Explanation:
Prevention costs are incurred to prevent defects. Appraisal costs are incurred to detect defective
output during and after the production process. Internal failure costs are associated with defective
output discovered before shipping. External failure costs are associated with defective output
discovered after it has reached the customer.
20. Statistical quality control often involves the use of control charts whose basic purpose is to:
A. Determine when accounting control procedures are not working.
B. Control labor costs in production operations.
C. Detect performance trends away from normal operations.
D. Monitor internal control applications of information technology.
Answer: C
IIA IIA-CIA-Part3최신덤프 IIA-CIA-Part3자료 IIA-CIA-Part3기출문제 IIA-CIA-Part3
Explanation:
Statistical control charts are graphic aids for monitoring the status of any process subject to random
variations. The chart consists of three horizontal lines plotted on a horizontal time scale. The vertical
scale represents the appropriate quantitative measure. The center line represents the average range
or overall mean for the process being controlled. The other two lines are the upper control limit and
the lower control limit. The processes are measured periodically, and the values are plotted on the
chart. If the value falls within the control limits, no action is taken. If the value falls outside the limits,
the process is considered "out of control," and an investigation is made for possible corrective
action. Another advantage of the chart is that it makes trends visible.
NO.6 Which of the following is not required by ISO 9000 standards?
A. Establishment of a quality management system.
B. Creation of an internal audit system.
C. Consistent high quality products.
D. Onsite inspections by a registrar.
Answer: C
IIA dump IIA-CIA-Part3 IIA-CIA-Part3인증 IIA-CIA-Part3인증
Explanation:
ISO 9000 is a set of generic standards for establishing and maintaining a quality system within an
entity. The standards provide no basis forjudging the quality of the end product. The marketplace
makes this determination. The objective of ISO 9000 standards is to ensure consistent quality.
NO.7 The use of teams in total quality management (TQM) is important because:
A. Well-managed teams can be highly creative and are able to address complex problems better
than individuals can.
B. Teams are quicker to make decisions, thereby helping to reduce cycle time.
C. Employee motivation is higher for team members than for individual contributors.
D. The use of teams eliminates the need for supervision, thereby allowing a company to become
leaner and more profitable.
Answer: A
IIA dumps IIA-CIA-Part3덤프 IIA-CIA-Part3시험문제 IIA-CIA-Part3덤프 IIA-CIA-Part3기출문제
Explanation:
Teams can use the diverse knowledge and skills of all team members. Employee involvement means
training and empowering employees to harness their creativity for problem solving. Quality control
circles are used to obtain input from employees and to locate the best perspective on problem
solving.
NO.8 A traditional quality control process in manufacturing consists of mass inspection of goods
only at the end of a production process. A major deficiency of the traditional control process is that:
A. It is expensive to do the inspections at the end of the process.
B. It is not possible to rework defective items.
C. It is not 100% effective.
D. It does not focus on improving the entire production process.
Answer: A
IIA dump IIA-CIA-Part3시험문제 IIA-CIA-Part3 IIA-CIA-Part3
Explanation:
The process used to produce the goods is not thoroughly reviewed and evaluated for efficiency and
effectiveness. Preventing defects and increasing efficiency by improving the production process
raises quality standards and decreases costs.
NO.9 A company with many branch stores has decided to use its best-performing store as a
benchmark organization for the purpose of analyzing the accuracy and reliability of branch store
financial reporting.
Which one of the following is the most likely measure to be included in a financial benchmark?
A. High turnover of employees.
B. High level of employee participation in setting budgets.
C. High amount of bad debt write-offs.
D. High number of suppliers.
Answer: C
IIA IIA-CIA-Part3최신덤프 IIA-CIA-Part3덤프 IIA-CIA-Part3
Explanation:
Internal benchmarking is the application of best practices in one part of the organization (e.g., a
high-performing branch store) to its other parts (other branches). This process requires, among
other things, use of quantitative and qualitative measures. A key indicator for financial performance
measurement is the amount of bad debt write-offs. A high level of bad debt write-offs could
indicate fraud, which would compromise the accuracy and reliability of financial reports. Bad debt
write-offs may result from recording fictitious sales.
NO.10 Which of the following is a characteristic of total quality management (TQM)?
A. Management by objectives.
B. On-the-job training by other workers.
C. Quality by final inspection.
D. Education and self-improvement.
Answer: D
IIA pdf IIA-CIA-Part3 IIA-CIA-Part3 IIA-CIA-Part3 dump
Explanation:
TQM is the continuous pursuit of quality in every aspect of organizational activities. One of the
means of achieving this is through employee training and empowerment.
ITexamdump의 C4120-783덤프의 VCE테스트프로그램과 70-482덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 642-874시험에 대비한 고품질 덤프와 000-N37시험 최신버전덤프를 제공해드립니다. 최고품질 000-273시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기