많은 사이트에서 Oracle인증 1Z0-026시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의Oracle인증 1Z0-026덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.
연구결과에 의하면Oracle인증 1Z0-026시험은 너무 어려워 시험패스율이 낮다고 합니다. ITExamDump의 Oracle인증 1Z0-026덤프와 만나면Oracle인증 1Z0-026시험에 두려움을 느끼지 않으셔도 됩니다. ITExamDump의 Oracle인증 1Z0-026덤프는 엘리트한 IT전문가들이 실제시험을 연구하여 정리해둔 퍼펙트한 시험대비 공부자료입니다. 저희 덤프만 공부하시면 시간도 절약하고 가격도 친근하며 시험준비로 인한 여러방면의 스트레스를 적게 받아Oracle인증 1Z0-026시험패스가 한결 쉬워집니다.
시험 번호/코드: 1Z0-026
시험 이름: Oracle (Network Administration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 128 문항
업데이트: 2014-04-20
ITExamDump의 Oracle인증 1Z0-026시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 Oracle인증 1Z0-026시험덤프로 어려운 Oracle인증 1Z0-026시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.
ITExamDump의 Oracle 인증 1Z0-026시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 Oracle 인증 1Z0-026실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 Oracle 인증 1Z0-026실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 Oracle 인증 1Z0-026덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.
ITExamDump는Oracle 1Z0-026시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의Oracle 1Z0-026시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Oracle 1Z0-026시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.
ITExamDump의Oracle인증 1Z0-026덤프를 공부하시면 한방에 시험을 패스하는건 문제가 아닙니다. ITExamDump의Oracle인증 1Z0-026덤프는 시험적중율 최고의 인지도를 넓히 알리고 있습니다.저희가 제공한 시험예상문제로 시험에 도전해보지 않으실래요? Oracle인증 1Z0-026덤프를 선택하시면 성공의 지름길이 눈앞에 다가옵니다.
1Z0-026 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-026.html
NO.1 The initial number of dispatchers is set to 50. Because of the load on the dispatcher
processes the DBA needs to decrease the number of dispatchers. Which two
recommended procedures could be used? (Choose two)
A. Issue the ALTER SYSTEM command to remove dispatchers.
B. Issue the ALTER SESSION command to remove dispatchers.
C. Edit the MTS_DISPATCHERS parameter and bounce the database.
D. Edit the MTS_MAX_DISPATCHERS parameter and bounce the database.
E. Edit the MTS_MIN_DISPATCHERS parameter and bounce the database.
Answer: A, C
Oracle시험문제 1Z0-026 1Z0-026 dump 1Z0-026 1Z0-026덤프
NO.2 Which process picks up a request from a response queue?
A. Client process
B. Listener process
C. Dispatcher process
D. Shared server process
Answer: C
Oracle 1Z0-026 1Z0-026 1Z0-026 1Z0-026
NO.3 Which naming method simplifies administrative tasks when configuration changes
need to be made available to all clients immediately?
A. Host Naming
B. Local Naming
C. Service Naming
D. Centralized Naming
Answer: D
Oracle 1Z0-026 1Z0-026
NO.4 When configuring for multiple protocol interchange, what does Source_Route
indicate?
A. Enables connections through Connection Manager.
B. Identifies the service name to which the connection needs to be established.
C. Identifies the database SID to which the connection needs to be established.
D. Identifies the node and the port number on which connection manager is running.
Answer: A
Oracle dump 1Z0-026 1Z0-026 1Z0-026
NO.5 Which two are tasks of the dispatcher process? (Choose two)
A. Receiving connection requests.
B. Placing a request in the request queue.
C. Updating the listener with new LOAD values.
D. Determining if the client request can be processed.
Answer: B, C
Oracle 1Z0-026자격증 1Z0-026 dumps
NO.6 If a password is configured, which command must be issued first when you need to
stop the listener?
A. Stop
B. Password
C. Set Password
D. Shutdown immediate
Answer: C
Oracle기출문제 1Z0-026 1Z0-026 1Z0-026 1Z0-026덤프
NO.7 In which file is the information that host naming is enabled stored?
A. Init.ora
B. Sqlnet.ora
C. Tnsnames.ora
D. Listener.ora
Answer: B
Oracle 1Z0-026 1Z0-026자격증
NO.8 You setup MTS for the PROD database, which uses multiple listeners to handle
requests. Which listener control command can you issue for each listener that the
dispatchers have registered with all listeners used by the database?
A. DISPATCHER<listener name>
B. SHOW ALL
C. SERVICES<listener name>
D. SHOW SERVICES<listener name>
E. SHOW DISPATCHER<listener name>
Answer: C
Oracle 1Z0-026 pdf 1Z0-026기출문제 1Z0-026 1Z0-026인증 1Z0-026 dumps
NO.9 When is the request sent to a listener?
A. After every call.
B. Before every call.
C. After name resolution.
D. Before name resolution.
Answer: C
Oracle기출문제 1Z0-026자료 1Z0-026 pdf 1Z0-026
NO.10 Which feature needs to be configured in Connection Manager to enable your system to
scale to a large number of users?
A. Connection Pooling
B. Network access control
C. Connection concentration
D. Multiple protocol interchange
Answer: C
Oracle dumps 1Z0-026 1Z0-026자격증 1Z0-026
NO.11 Which NAMESCTL command can be used to manually force Names Server discovery?
A. Flush
B. Reload
C. Reorder_NS
D. Discover_NS
E. Start_client_cache
Answer: C
Oracle최신덤프 1Z0-026덤프 1Z0-026자료
NO.12 Which folder would you use in the Net8 Assistant Tool to change the naming
method?
A. Profile
B. Configuration
C. Service Names
D. Oracle Names Server
Answer: A
Oracle pdf 1Z0-026 1Z0-026 1Z0-026기출문제
NO.13 Which statement is true regarding connection breaks?
A. In-band breaks are faster than out-band breaks.
B. In-band breaks use messages that invoke operating system signals.
C. In-band breaks are issued to the server process by the operating system.
D. Out-band breaks send urgent data messages and are faster than in-band breaks.
E. There are no fundamental differences between in-band breaks and out-band breaks.
Answer: D
Oracle 1Z0-026기출문제 1Z0-026 1Z0-026덤프 1Z0-026최신덤프
NO.14 Which are two features of Connection Manager? (Choose two)
A. Connection exchange.
B. Connection resolution.
C. Connection multiplexing.
D. Connection cross-linking.
E. Protocol transformation.
F. Protocol interchange capability.
Answer: C, F
Oracle 1Z0-026 1Z0-026 1Z0-026 pdf
NO.15 You are using host naming. Which components need to be installed?
A. Net8 on the server and the client machine.
B. TCP/IP and Net8 only on the client machine.
C. TCP/IP and Net8 only on the server machine.
D. TCP/IP and Net8 on the server and the client machine.
Answer: D
Oracle 1Z0-026 1Z0-026자료
NO.16 Which parameter specifies the maximum number of server processes that get
pre-spawned in a dedicated server environment? (Do not use any extra words or
characters)
Answer: MTS_MAX_SERVERS
NO.17 How many response queues are present in a multithreaded server environment?
A. One per system.
B. One per database.
C. One per listener.
D. One per dispatcher.
Answer: D
Oracle dumps 1Z0-026 1Z0-026 pdf 1Z0-026덤프
NO.18 A DBA has installed and configured Net8 TCP/IP on the client and the server but is
still unable to connect from Windows NT Workstation using SQL*Plus to an Oracle
instance running on a remote UNIX server. However there are no problems when
using FTP between two nodes. What actions next taken by the DBA could make
progress towards diagnosing the problem?
A. Attempting to PING the server from the client.
B. Checking to see if the DNS configuration is correct.
C. Connecting by using the Net8 Assistant Test Connection feature.
D. Checking to see if the TNS ping process is running on the server.
Answer: C
Oracle dump 1Z0-026 1Z0-026시험문제 1Z0-026덤프
NO.19 The listener audit trail provides information about every client connection request.
Which additional request about the client is NOT provided?
A. Client user ID
B. Database user name
C. Network protocol
D. Client host (platform)
Answer: B
Oracle기출문제 1Z0-026자격증 1Z0-026 1Z0-026 1Z0-026
NO.20 Which statement regarding the logging and tracing of Net8 is True?
A. Logging cannot be disabled on client.
B. There are four levels of logging that can be set.
C. Tracing can take up significant disk space but has little impact on performance.
D. There is no way to prevent new trace data from being appended to the same file with
each new session.
Answer: B
Oracle 1Z0-026인증 1Z0-026 1Z0-026 1Z0-026
ITexamdump의 200-101덤프의 VCE테스트프로그램과 300-208덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 ST0-237시험에 대비한 고품질 덤프와 C_TPLM30_66시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-409시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기