Microsoft 자격증 70-462 시험덤프

ITExamDump 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 알 맞춤한 퍼펙트한 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편하게 인증시험을 패스할 수 있습니다.많은 it인증관연 응시자들은 우리 ITExamDump가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 ITExamDump 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.

ITExamDump이 바로 아주 좋은Microsoft 70-462인증시험덤프를 제공할 수 있는 사이트입니다. ITExamDump 의 덤프자료는 IT관련지식이 없는 혹은 적은 분들이 고난의도인Microsoft 70-462인증시험을 패스할 수 있습니다. 만약ITExamDump에서 제공하는Microsoft 70-462인증시험덤프를 장바구니에 넣는다면 여러분은 많은 시간과 정신력을 절약하실 수 있습니다. 우리ITExamDump 의Microsoft 70-462인증시험덤프는 ITExamDump전문적으로Microsoft 70-462인증시험대비로 만들어진 최고의 자료입니다.

시험 번호/코드: 70-462

시험 이름: Microsoft (Administering Microsoft SQL Server 2012 Databases)

우리ITExamDump 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리ITExamDump는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.Microsoft 70-462인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리ITExamDump 는 여러분이 100%Microsoft 70-462인증시험을 패스할 수 있다는 것을 보장합니다.

Microsoft인증70-462시험은 현재 치열한 IT경쟁 속에서 열기는 더욱더 뜨겁습니다. 응시자들도 더욱더 많습니다. 하지만 난이도난 전혀 낮아지지 않고 이지도 어려운 시험입니다. 어쨌든 개인적인 지식 장악도 나 정보기술 등을 테스트하는 시험입니다. 보통은Microsoft인증70-462시험을 넘기 위해서는 많은 시간과 신경이 필요합니다.

IT인증자격증만 소지한다면 일상생활에서 많은 도움이 될것입니다. 하지만 문제는 어떻게 간단하게 시험을 패스할것인가 입니다. ITExamDump는 IT전문가들이 제공한 시험관련 최신 연구자료들을 제공해드립니다.ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다. ITExamDump의Microsoft 인증70-462시험대비 덤프로Microsoft 인증70-462시험을 패스하세요.

ITExamDump에서 출시한 Microsoft인증 70-462덤프는 실제시험문제 커버율이 높아 시험패스율이 가장 높습니다. Microsoft인증 70-462시험을 통과하여 자격증을 취득하면 여러방면에서 도움이 됩니다. ITExamDump에서 출시한 Microsoft인증 70-462덤프를 구매하여Microsoft인증 70-462시험을 완벽하게 준비하지 않으실래요? ITExamDump의 실력을 증명해드릴게요.

70-462 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-462.html

NO.1 You administer a Microsoft SQL Server 2012 database.
You create an availability group named haContosoDbs. Your primary replica is available at
Server01\Contoso01.
You need to configure the availability group to have the highest availability. You also need to ensure that
no data is lost.
Which Transact-SQL statement should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

Microsoft   70-462   70-462 dump

NO.2 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
At 16:20 hours, you discover that pages 17, 137, and 205 on one of the database files are corrupted on
the transactional database. You need to ensure that the transactional database is restored.
You also need to ensure that data loss is minimal.
What should you do?
A. Perform a partial restore.
B. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
C. Perform a point-in-time restore.
D. Restore the latest full backup.
E. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
F. Perform a page restore.
G. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: F

Microsoft최신덤프   70-462   70-462   70-462덤프

NO.3 DRAG DROP
You administer three Microsoft SQL Server 2012 servers named ServerA, ServerB, and ServerC.
ServerA is the acting principal and ServerB is the mirror.
You need to add ServerC as a witness to the existing mirroring session between ServerA and ServerB.
You need to achieve this goal without delaying synchronization.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:

NO.4 You administer all the deployments of Microsoft SQL Server 2012 in your company.
A database contains a large product catalog that is updated periodically.
You need to be able to send the entire product catalog to all branch offices on a monthly basis.
Which configuration should you use?
A.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
BSQL Server that includes an application database configured to perform transactional replication
C.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
DTwo servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
E.SQL Server that includes an application database configured to perform snapshot replication
F.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
G.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
H.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
Answer: E

Microsoft   70-462자격증   70-462   70-462   70-462인증

NO.5 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that data changes are sent to a non-SQL Server database server in near real time.
You also need to ensure that data on the primary server is unaffected.
Which configuration should you use?
A.SQL Server that includes an application database configured to perform transactional replication
B.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
C.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
D.SQL Server that includes an application database configured to perform snapshot replication
E.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
F.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
H.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
Answer: A

Microsoft기출문제   70-462   70-462   70-462자격증   70-462 dumps

NO.6 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
The differential backup of the reporting database fails. Then, the reporting database fails at 14:00 hours.
You need to ensure that the reporting database is restored. You also need to ensure that data loss is
minimal.
What should you do?
A. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
B. Perform a point-in-time restore.
C Restore the latest full backup.
D. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
E. Restore the latest full backup. Then, restore the latest differential backup.
F. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
G. Perform a page restore.
H. Perform a partial restore.
Answer: C

Microsoft   70-462 pdf   70-462 dumps

NO.7 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that uses a storage area network (SAN) remains available if
any of the servers fail. You also need to minimize the amount of storage used by the database.
Which configuration should you use?
A.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.SQL Server that includes an application database configured to perform transactional replication
C.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
D.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
F.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.SQL Server that includes an application database configured to perform snapshot replication
H.Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
Answer: H

Microsoft   70-462   70-462   70-462   70-462자격증   70-462기출문제

NO.8 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that includes up-to-the-minute reporting requirements can be
off-loaded from the primary database to another server. You also need to be able to add indexes to the
secondary database.
Which configuration should you use?
A.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
C.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
D.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
F.SQL Server that includes an application database configured to perform transactional replication
G.SQL Server that includes an application database configured to perform snapshot replication
HTwo servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
Answer: F

Microsoft   70-462   70-462   70-462   70-462

NO.9 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
One of the hard disk drives that stores the reporting database fails at 16:40 hours.
You need to ensure that the reporting database is restored. You also need to ensure that data loss is
minimal.
What should you do?
A. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
B. Perform a partial restore.
C. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
D. Perform a point-in-time restore.
E. Restore the latest full backup.
F. Perform a page restore.
G. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: H

Microsoft   70-462기출문제   70-462자격증   70-462최신덤프   70-462

NO.10 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
At 14:00 hours, you discover that pages 71, 520, and 713 on one of the database files are corrupted on
the reporting database.
You need to ensure that the databases are restored. You also need to ensure that data loss is minimal.
What should you do?
A. Perform a partial restore.
B. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
C. Restore the latest full backup.
D. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
E. Perform a page restore.
F. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
G. Perform a point-in-time restore.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: H

Microsoft   70-462   70-462덤프   70-462자료

ITExamDump의 Microsoft인증 70-462덤프를 공부하여Microsoft인증 70-462시험을 패스하는건 아주 간단한 일입니다.저희 사이트에서 제작한Microsoft인증 70-462덤프공부가이드는 실제시험의 모든 유형과 범위가 커버되어있어 높은 적중율을 자랑합니다.시험에서 불합격시 덤프비용은 환불신청 가능하기에 안심하고 시험준비하시면 됩니다.