HP인증 HP0-Y19시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. HP인증 HP0-Y19시험을 패스하려면 ITExamDump의HP인증 HP0-Y19덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. HP인증 HP0-Y19덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.
ITExamDump의 제품들은 모두 우리만의 거대한IT업계엘리트들로 이루어진 그룹 즉 관련업계예서 권위가 있는 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도 적중률이 아주 높습니다. 우리의 덤프로 완벽한HP인증HP0-Y19시험대비를 하시면 되겠습니다. 이렇게 어려운 시험은 우리HP인증HP0-Y19덤프로 여러분의 고민과 꿈을 한방에 해결해드립니다.
시험 번호/코드: HP0-Y19
시험 이름: HP (ProCurve Accelerated ASE Mobility)
ITExamDump연구한 전문HP HP0-Y19인증시험을 겨냥한 덤프가 아주 많은 인기를 누리고 있습니다. ITExamDump제공되는 자료는 지식을 장악할 수 있는 반면 많은 경험도 쌓을 수 있습니다. ITExamDump는 많은 IT인사들의 요구를 만족시켜드릴 수 있는 사이트입니다. 비록HP HP0-Y19인증시험은 어렵지만 우리ITExamDump의 문제집으로 가이드 하면 여러분은 아주 자신만만하게 응시하실 수 있습니다. 안심하시고 우리 ITExamDump가 제공하는 알맞춤 문제집을 사용하시고 완벽한HP HP0-Y19인증시험 준비를 하세요.
ITExamDump는 IT인증자격증시험에 대비한 덤프공부가이드를 제공해드리는 사이트인데 여러분의 자격증 취득의 꿈을 이루어드릴수 있습니다. HP인증 HP0-Y19시험을 등록하신 분들은 바로ITExamDump의HP인증 HP0-Y19덤프를 데려가 주세요. 단기간에 시험패스의 기적을 가져다드리는것을 약속합니다.
HP HP0-Y19인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.HP HP0-Y19시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.
HP0-Y19 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y19.html
NO.1 Port C1 on a ProCurve Switch 5412zl is a tagged member of VLAN 50 and an untagged member
of VLAN 1. Port C2 and port C3 are at default VLAN settings. What is the effect of the following
command entered at the CLI? 5412zl(config)# trunk c1-c3 trk1
A.The trunk is defined as an untagged member of VLAN 1, but port C1 is not included.
B.The trunk is not defined, because the ports' VLAN memberships do not match.
C.The trunk is defined as an untagged member of VLAN 1 and a tagged member of VLAN 50.
D.The trunk is defined as an untagged member of VLAN 1 but is not a member of VLAN 50.
Correct:D
HP pdf HP0-Y19 HP0-Y19인증 HP0-Y19 dumps HP0-Y19
NO.2 You are planning a network upgrade at a small company. During a meeting, you learn that the
customer will install VoIP telephones that set Layer 2 priority markers for allvoice traffic, and the
VoIP traffic will not cross any routed links. What is necessary to ensure that ProVision ASIC
switches maintain the priorities set by the phones? (Selecttwo.)
A.LLDP-MED for all voice VLANs
B.an IEEE 802.1p-to-DSCP map for voice traffic
C.port-based priorities for ports connected to phones
D.default QoS settings
E.tagged links for all voice VLAN traffic
Correct:D E
HP pdf HP0-Y19 HP0-Y19인증 HP0-Y19 dumps HP0-Y19
NO.3 Click the Exhibit button. What is the role of this Switch 3500yl in the OSPF routing domain?
A.ASBR
B.virtual router
C.ABR
D.internal router
Correct:D
HP pdf HP0-Y19 HP0-Y19인증 HP0-Y19 dumps HP0-Y19
NO.4 You connect an IP telephone that supports LLDP-MED to a port on a ProCurve Switch 5406zl.
The port is a member of a voice VLAN and also requires 802.1X authentication. How will
LLDP-MED and 802.1X interact?
A.The switch will exempt the phone from the 802.1X requirement after confirming its LLDP-MED
information.
B.The switch will submit the phone's authentication credentials to a RADIUS server after the devices
exchange LLDP-MED information.
C.The switch will permit LLDP-MED communication with the phone after authentication is complete.
D.The switch will use information from the phone's first LLDP-MED frame to submit its authentication
credentials.
Correct:C
HP pdf HP0-Y19 HP0-Y19인증 HP0-Y19 dumps HP0-Y19
NO.5 You must configure Multiple Spanning Tree Protocol (MSTP) on two ProCurve 8212zl switches
and four 5406zl switches. Which configuration is necessary to ensure that all of the switches join
the same MST region?
A.The switches must have identical Port Priorities for shared links in each MST instance.
B.Bridge Priorities on all switches must be configured so that each MST instance has a different Root
Bridge.
C.All switch-to-switch links in each MST instance must be tagged members of all user VLANs.
D.The switches must be configured with identical config-names, config-revisions, and VLAN-to-instance
mappings.
Correct:D
HP pdf HP0-Y19 HP0-Y19인증 HP0-Y19 dumps HP0-Y19
NO.6 You must configure a ProCurve Switch 8212zl to be the Backup router for a VRID associated
with VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A.It must be an address assigned to a multi-netted interface.
B.It must be an address that is not assigned to any interface on either router.
C.It must match the Backup router's address for the VLAN 10 interface.
D.It must match the Owner router's address for the VLAN 10 interface.
Correct:D
HP pdf HP0-Y19 HP0-Y19인증 HP0-Y19 dumps HP0-Y19
NO.7 Which part of the multicast address range is reserved for applications that will remain within an
enterprise intranet?
A.Internetwork Control Block
B.AD-HOC Block
C.Administratively Scoped Address Block
D.Local Network Control Block
Correct:C
HP pdf HP0-Y19 HP0-Y19인증 HP0-Y19 dumps HP0-Y19
NO.8 You configured VLAN 10 and VLAN 24 on a ProCurve Switch 3500yl-48G. The network servers
reside in VLAN 10, which has an IP address range of 10.1.10.0/24. Network clients reside in VLAN
24, which has an IP address range of 10.1.24.0/24. You configure an ACL with these entries and
apply it statically to ports in VLAN 24: permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq ftp
permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq http permit tcp 10.1.24.0 0.0.0.0
10.1.10.10 255.255.255.255 eq telnet What is the effect of these ACLs on the clients located in
VLAN 24?
A.They would have no access at all, because the ACL is misconfigured.
B.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but no access anywhere else.
C.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but full access to everything
else in the 10.1.10.0 subnet.
D.They could not access anything in the 10.1.10.0 subnet, because IP has not been specified in the ACL.
Correct:B
HP pdf HP0-Y19 HP0-Y19인증 HP0-Y19 dumps HP0-Y19
NO.9 On a ProCurve Switch 8212zl, which feature must be enabled before you can enable VRRP?
A.MSTP
B.IP routing
C.IP multicast
D.RIP
Correct:B
HP pdf HP0-Y19 HP0-Y19인증 HP0-Y19 dumps HP0-Y19
NO.10 Click the Exhibit button. What does this output from the show ip ospf neighbor command
indicate about the OSPF neighbor relationship between this router and the router with ID 10.3.0.1?
A.They are in different OSPF areas.
B.They have not formed an adjacency.
C.They are configured with different OSPF versions.
D.They are not eligible to be elected DR or BDR.
Correct:B
HP pdf HP0-Y19 HP0-Y19인증 HP0-Y19 dumps HP0-Y19
ITExamDump는 IT인증자격증을 취득하려는 IT업계 인사들의 검증으로 크나큰 인지도를 가지게 되었습니다. 믿고 애용해주신 분들께 감사의 인사를 드립니다. HP HP0-Y19덤프도 다른 과목 덤프자료처럼 적중율 좋고 통과율이 장난이 아닙니다. 덤프를 구매하시면 퍼펙트한 구매후 서비스까지 제공해드려 고객님이 보유한 덤프가 항상 시장에서 가장 최신버전임을 약속해드립니다. HP HP0-Y19덤프만 구매하신다면 자격증 취득이 쉬워져 고객님의 밝은 미래를 예약한것과 같습니다.
댓글 없음:
댓글 쓰기