ITExamDump에는LSI L50-502인증시험의 특별한 합습가이드가 있습니다. 여러분은 많은 시간과 돈을 들이지 않으셔도 많은 IT관련지식을 배우실수 있습니다.그리고 빠른 시일 내에 여러분의 IT지식을 인증 받으실 있습니다. ITExamDump인증자료들은 우리의 전문가들이 자기만의 지식과 몇 년간의 경험으로 준비중인 분들을 위하여 만들었습니다.
LSI인증L50-502시험덤프공부자료는ITExamDump제품으로 가시면 자격증취득이 쉬워집니다. ITExamDump에서 출시한 LSI인증L50-502덤프는 이미 사용한 분들에게 많은 호평을 받아왔습니다. 시험적중율 최고에 많은 공부가 되었다고 희소식을 전해올때마다 ITExamDump는 더욱 완벽한LSI인증L50-502시험덤프공부자료로 수정하고기 위해 최선을 다해왔습니다. 최고품질으LSI인증L50-502덤프공부자료는ITExamDump에서만 찾아볼수 있습니다.
거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면LSI인증 L50-502시험은 무조건 패스해야 합니다. 하지만LSI인증 L50-502시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는LSI인증 L50-502시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전LSI인증 L50-502덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는LSI인증 L50-502영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
ITExamDump에서 출시한 LSI인증 L50-502덤프는LSI인증 L50-502시험에 대비하여 IT전문가들이 제작한 최신버전 공부자료로서 시험패스율이 100%입니다.ITExamDump는 고품질 LSI인증 L50-502덤프를 가장 친근한 가격으로 미래의 IT전문가들께 제공해드립니다. ITExamDump의 소원대로 멋진 IT전문가도 거듭나세요.
시험 번호/코드: L50-502
시험 이름: LSI (LSI SVM5 Solutions Architect)
모두 아시다시피LSI L50-502인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.LSI L50-502인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.
ITExamDump의 LSI인증L50-502시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의LSI인증L50-502시험덤프자료를 제공받을수 있습니다.
L50-502 덤프무료샘플다운로드하기: http://www.itexamdump.com/L50-502.html
NO.1 A retailer with a SQL database must pull statistics from a production database but would like to do so
without interfering with production work. The statistics are required by three different departments. Which
two methods could be used to do this? (Choose two.)
A. Use multiMigrate on the database volume with one job and assign the destination volume to the three
hosts.
B. Use multiMirror asynchronous on the database volume with three jobs and assign the jobs to the three
hosts.
C. Use multiView on the database volume to create a PiT; create three views for that PiT and assign it to
the three hosts.
D. Use multiCopy on the database volume with three jobs and assign each destination volume to the
three hosts.
Answer: C,D
LSI인증 L50-502기출문제 L50-502 dump
NO.2 A customer has an environment that includes existing VMware disks that must be imported into SVM.
VMware marks a signature on the volumes which identifies the controller WWNN and LUN ID. Which
statement describes what you need to take into account when migrating the VMware disks under SVM
control?
A. VMware will not resignature automatically.
B. VMware will present the same LUN ID after importing.
C. VMware will modify the DPM WWNN to match the array WWNN.
D. VMware resignaturing must be set correctly.
Answer: D
LSI기출문제 L50-502자격증 L50-502자격증 L50-502
NO.3 You are deploying ESX servers with SVM. You have followed the recommended best practice and
have designed your front-end SAN to have redundant fabrics and allowed for both HBA initiator ports to
see both DPMs. You have created SVM volumes and have presented them to your ESX servers. After
performing an HBA rescan from an ESX server, how many paths should be available to each LUN?
A. 2
B. 4
C. 8
D. 16
Answer: B
LSI L50-502인증 L50-502시험문제
NO.4 Your customer is looking for a high availability solution for company-critical data with an RPO of 0.
Periodically the customer would like to verify the integrity of replicated data. You configure two SVM
domains on two sites and use synchronous multiMirror between the two sites. What are two methods to
verify the data? (Choose two.)
A. Create a PiT on the synchronous multiMirror group, create a view on the second synchronous mirror
job PiT and assign it to a host.
B. Use multiCopy for one of the synchronous multiMirror jobs and then assign the destination volume to a
host.
C. Create a PiT on the second synchronous multiMirror job, create a view for that PiT and assign it to a
host.
D. Create a PiT on the first synchronous multiMirror job, create a view for that PiT and assign it to a host.
Answer: A,C
LSI L50-502 L50-502 L50-502자료
NO.5 Your customer would like to consolidate multiple storage arrays which are currently under-utilized. The
SAN is not currently managed by SVM. The customer desires the minimal impact to their applications.
Which two statements describe the process to consolidate the arrays under SVM? (Choose two.)
A. Import existing LUNs into SVM pools.
B. Use multiMigrate to move the volumes to the desired array.
C. Use asynchronous mirror to move the volumes to the desired array.
D. Use multiMigrate to move the volumes to the desired array and remove SVM.
Answer: A,B
LSI자료 L50-502기출문제 L50-502시험문제
NO.6 Your customer wants to run backups at any time of the day, using snapshots of production data, leaving
production systems fully online and available during backups. Which SVM application would be used to
achieve their online backup requirement?
A. multiMigrate
B. multiMirror
C. multiView
D. SVM volume management
Answer: C
LSI인증 L50-502 L50-502 L50-502
NO.7 You are trying to determine the optimal solution to meet the data recovery needs of a customer. What
will provide your customer with the smallest recovery time objective and array failure protection?
A. asynchronous multiMirror
B. multiView
C. multiCopy
D. synchronous multiMirror
Answer: D
LSI dump L50-502자격증 L50-502덤프 L50-502 dumps
NO.8 A financial institution has an Oracle application that is critical to its business. Which three factors will
enable you to assess how to provide high availability and recovery? (Choose three.)
A. application recovery time objective
B. application recovery point objective
C. distance between data centers
D. number of network adapters
E. distance between servers
Answer: A,B,C
LSI L50-502 L50-502
NO.9 A customer has an AIX high availability cluster multiprocessing (HACMP) environment and would like to
use SVM to provide additional storage to the cluster. Which consideration must be met to access the new
volumes?
A. The AIX light agent must be installed on all nodes.
B. The new volumes must be imported into a volume group.
C. The LSI failover driver must be installed on all nodes.
D. The MPIO driver must be disabled on all nodes.
Answer: A
LSI최신덤프 L50-502자격증 L50-502 pdf
NO.10 Your customer has recently begun using hourly PiTs for rapid application recovery. The desire is to
implement a data retention plan where each hourly PiT is kept on disk until 8:00 PM. Four weeks?worth
the customer would like to keep a daily snapshot copy of the data for seven days. Also the customer
wants to keep four weeks worth of weekly views on a secondary, low cost array. The solution should
minimize disk utilization on the primary array. Which three tasks would you implement to accomplish this
goal? (Choose three.)
A. Create a multiCopy of the application data and keep seven copies.
B. Create a View on the most recent PiT each night at 8:00 PM and retain for seven days.
C. Create a multiCopy of the Sunday View to the second array and keep four copies.
D. Purge PiTs on the source volume at 8:00 PM to keep seven PiTs.
E. Use multiMigrate to move the Sunday View to the second array and keep four copies.
Answer: B,C,D
LSI L50-502 pdf L50-502인증 L50-502덤프 L50-502시험문제
NO.11 A customer would like to implement SVM into their current storage environment and has asked you to
provide a detailed overview of both the SVM and DPM architectures. Where would you suggest that they
locate the required information?
A. Host Compatibility Matrix
B. Deployment Guide for SVM 4
C. SVM User Guide
D. Configuration Knowledge Base for SVM 5
Answer: C
LSI L50-502 L50-502 L50-502인증
NO.12 A customer is using SVM to provide five volumes to a Windows 2008 server. These volumes have
been converted to dynamic disks and striped using the OS. Which consideration should be met if the
customer would like to use PiTs and views to access this data from another server?
A. The data cannot be accessed from another host.
B. multiMigrate should be used to migrate the data to a single volume.
C. A consistency group should be defined for the five volumes.
D. The standard agent must be used to access the view.
Answer: C
LSI L50-502 L50-502 L50-502 L50-502 dumps
NO.13 You have a disaster recovery scenario where newly created SVM Views will be presented to an ESX
server or ESX cluster at a secondary site. To avoid importing the views as new volumes, which ESX
advanced setting should be enabled?
A. port retry
B. resignature
C. device reset
D. LUN reset
Answer: B
LSI L50-502시험문제 L50-502 dumps L50-502인증
NO.14 You are implementing zoning for an SVM 5 environment. Which rule should you observe when zoning
servers with DPMs?
A. There should be no more than four paths per DPM to any one server.
B. There should be no more than two paths per DPM to any one server.
C. All servers and DPM front-end ports should reside in the same zone.
D. The servers should be zoned directly with the storage controllers.
Answer: B
LSI L50-502기출문제 L50-502최신덤프 L50-502 dumps
NO.15 Which storage arrays can be migrated under SVM 5 control.?
A. SAS storage array
B. iSCSI storage array
C. FC storage array
D. Infiniband storage array
Answer: C
LSI L50-502 L50-502덤프
만약 시험만 응시하고 싶으시다면 우리의 최신LSI L50-502자료로 시험 패스하실 수 있습니다. ITExamDump 의 학습가이드에는LSI L50-502인증시험의 예상문제, 시험문제와 답 임으로 100% 시험을 패스할 수 있습니다.우리의LSI L50-502시험자료로 충분한 시험준비하시는것이 좋을것 같습니다. 그리고 우리는 일년무료 업데이트를 제공합니다.
댓글 없음:
댓글 쓰기