ITExamDump의 CompTIA 인증 PD1-001시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 CompTIA 인증 PD1-001실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 CompTIA 인증 PD1-001실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 CompTIA 인증 PD1-001덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.
IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. CompTIA인증 PD1-001시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITExamDump는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITExamDump의CompTIA인증 PD1-001덤프로 자격증을 편하게 취득하는게 어떨가요?
CompTIA인증 PD1-001시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면CompTIA인증 PD1-001시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 CompTIA인증 PD1-001덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는CompTIA인증 PD1-001덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.
ITExamDump의CompTIA인증PD1-001자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는CompTIA인증PD1-001시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
시험 번호/코드: PD1-001
시험 이름: CompTIA (CompTIA PDI+ Beta Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 861 문항
업데이트: 2014-04-27
ITExamDump의 CompTIA인증 PD1-001덤프를 구매하시고 공부하시면 밝은 미래를 예약한것과 같습니다. ITExamDump의 CompTIA인증 PD1-001덤프는 고객님이 시험에서 통과하여 중요한 IT인증자격증을 취득하게끔 도와드립니다. IT인증자격증은 국제적으로 인정받기에 취직이나 승진 혹은 이직에 힘을 가해드립니다. 학원공부나 다른 시험자료가 필요없이ITExamDump의 CompTIA인증 PD1-001덤프만 공부하시면CompTIA인증 PD1-001시험을 패스하여 자격증을 취득할수 있습니다.
CompTIA인증PD1-001시험덤프공부자료는ITExamDump제품으로 가시면 자격증취득이 쉬워집니다. ITExamDump에서 출시한 CompTIA인증PD1-001덤프는 이미 사용한 분들에게 많은 호평을 받아왔습니다. 시험적중율 최고에 많은 공부가 되었다고 희소식을 전해올때마다 ITExamDump는 더욱 완벽한CompTIA인증PD1-001시험덤프공부자료로 수정하고기 위해 최선을 다해왔습니다. 최고품질으CompTIA인증PD1-001덤프공부자료는ITExamDump에서만 찾아볼수 있습니다.
PD1-001 덤프무료샘플다운로드하기: http://www.itexamdump.com/PD1-001.html
NO.1 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA PD1-001 PD1-001 PD1-001
NO.2 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA PD1-001시험문제 PD1-001
NO.3 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA덤프 PD1-001 PD1-001인증 PD1-001자격증 PD1-001
NO.4 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA PD1-001 PD1-001 PD1-001
NO.5 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA시험문제 PD1-001 PD1-001자격증 PD1-001 PD1-001자료
NO.6 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA PD1-001 PD1-001
NO.7 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA자료 PD1-001 dumps PD1-001 PD1-001자격증
NO.8 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA PD1-001인증 PD1-001 PD1-001 dumps PD1-001 PD1-001 dump
NO.9 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA PD1-001자격증 PD1-001자격증 PD1-001 dump
NO.10 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA PD1-001덤프 PD1-001 PD1-001 PD1-001최신덤프
NO.11 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA PD1-001 PD1-001 PD1-001기출문제
NO.12 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA PD1-001자료 PD1-001기출문제 PD1-001자격증
NO.13 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA PD1-001기출문제 PD1-001자격증
NO.14 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA dump PD1-001자료 PD1-001기출문제 PD1-001
NO.15 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA덤프 PD1-001 pdf PD1-001 PD1-001기출문제 PD1-001
NO.16 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA PD1-001 PD1-001
NO.17 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA PD1-001 pdf PD1-001인증
NO.18 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA PD1-001 PD1-001 pdf PD1-001시험문제
NO.19 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA PD1-001덤프 PD1-001 PD1-001인증 PD1-001 PD1-001 pdf
NO.20 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA시험문제 PD1-001덤프 PD1-001시험문제 PD1-001 pdf
ITexamdump의 C_TBW45_70덤프의 VCE테스트프로그램과 IIA-CFSA덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-347시험에 대비한 고품질 덤프와 BAS-002시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-409시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기