Microsoft인증70-662시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. 근 몇년간 IT인사들에게 최고의 인기를 누리고 있는 과목으로서 그 난이도 또한 높습니다. 자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. Microsoft인증70-662시험을 패스하고 싶은 분들은ITExamDump제품으로 가보세요.
많은 사이트에서도 무료Microsoft 70-662덤프데모를 제공합니다. 우리도 마찬가지입니다. 여러분은 그러한Microsoft 70-662데모들을 보시고 다시 우리의 덤프와 비교하시면, 우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아사될 것 입니다. 우리 ITExamDump사이트에서 제공되는Microsoft인증70-662시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 왜냐면 우리 ITExamDump에는 베터랑의 전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Microsoft인증70-662시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이Microsoft인증70-662시험에 많은 도움이Microsoft 70-662될 것입니다. ITExamDump 가 제공하는70-662테스트버전과 문제집은 모두Microsoft 70-662인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에Microsoft 70-662시험을 패스하실 수 있습니다. 때문에Microsoft 70-662덤프의 인기는 당연히 짱 입니다.
현재Microsoft 70-662인증시험을 위하여 노력하고 있습니까? 빠르게Microsoft인증 70-662시험자격증을 취득하고 싶으시다면 우리 ITExamDump 의 덤프를 선택하시면 됩니다,. ITExamDump를 선택함으로Microsoft 70-662인증시험패스는 꿈이 아닌 현실로 다가올 것입니다,
ITExamDump 는 여러분의 IT전문가의 꿈을 이루어 드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도Microsoft 인증70-662 인증시험으로 고민하시고 계십니까? Microsoft 인증70-662인증시험 가이드를 사용하실 생각은 없나요? ITExamDump는 여러분께 시험패스의 편리를 드릴 수 있습니다.
ITExamDump는Microsoft 70-662시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의Microsoft 70-662시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Microsoft 70-662시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.
ITExamDump의 Microsoft인증 70-662시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 Microsoft인증 70-662덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. Microsoft인증 70-662시험을 통과하여 자격증을 취득하려면ITExamDump의 Microsoft인증 70-662덤프로 시험준비공부를 하세요.
시험 번호/코드: 70-662
시험 이름: Microsoft (TS: Microsoft Exchange Server)
Microsoft인증70-662시험을 패스하기가 어렵다고 하면 합습가이드를 선택하여 간단히 통과하실 수 잇습니다. 우리ITExamDump에서는 무조건 여러분을 위하여 관연 자료덤프 즉 문제와 답을 만들어낼 것입니다. 우리덤프로Microsoft인증70-662시험준비를 잘하시면 100%Microsoft인증70-662시험을 패스할 수 있습니다. ITExamDump덤프로 여러분은Microsoft인증70-662시험을 패스는 물론 여러분의 귀증한 간도 절약하실 수 있습니다.
70-662 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-662.html
NO.1 You have an Exchange Server 2010 Service Pack1 organization. The Organization contains a
HubTransport server named Server1 and an Edge Transport sever named server2.All servers are
configured to use an internal DNS named DNS1 for host resolution.
You configure an Edge Subscription from Server1 to Server2.You deploy a monitoring server named
ServerApp1. ServerApp1 will send email notification toadministrators.
You need to ensure that ServerApp1 can relay email to the administrators through Server1.
What should you do?
A. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
B. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
C. From the Exchange Management Console (EMC), create a transport rule.
D. From the Exchange Management Console (EMC), modify the properties of the remote domain.
E. From the Exchange Management Shell, run the Set-receiveConnector cmdlet.
F. From the Exchange Management Console (EMC), disable the IP Block List feature.
G. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
Answer: E
Microsoft자료 70-662 70-662
NO.2 You have an Exchange organization. All servers in the organization have Exchange Server 2010
SP1installed.The organization contains a distribution group named Group1.You need to ensure that a
user named User1 can review and approve all messages sent to Group1.What should you do?
A. Modify the Managed By list for Group1.
B. Create a new journal rule and specify user1 as the journal recipient.
C. Modify the mail flow settings for User1.
D. Modify the mail flow settings for Group1.
Answer: D
Microsoft 70-662자료 70-662시험문제 70-662자료 70-662자격증 70-662시험문제
NO.3 You have a hosted Exchange organization. All servers in the organization have Exchange Server 2010
SP1 installed.
You need to group a set of users for administrative delegation.
What should you create?
A. A new distribution group
B. A new management role
C. a managed folder mailbox policy
D. a new role assignment
Answer: D
Microsoft 70-662 70-662 dump 70-662자격증 70-662
NO.4 You have an Exchange Server 2010 Service Pack1 organization. The Organization contains a Hub
Transport server named Server1 and an Edge Transport sever named server2.
All servers are configured to use an internal DNS named DNS1 for host resolution.
You configure an Edge Subscription from Server1 to Server2.
You need to modify the delayed acknowledgment (ACK) setting of Server2.
What should you do?
A. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
B. From the Exchange Management Console (EMC), create a transport rule.
C. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
D. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.
E. From the Exchange Management Console (EMC), disable the IP Block List feature.
F. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
G. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
H. From the Exchange Management Console (EMC), modify the properties of the remote domain.
Answer: D
Microsoft시험문제 70-662 dumps 70-662 70-662덤프 70-662덤프
NO.5 You have an Exchange Server 2010 Service Pack1 (SP1) organization. The organization contains the
servers configured as shown in the following table
The Mailbox servers are members of a database availability group (DAG) named DAG1.
You need to configure DAG1 to use a static DAG IP 192.168.1.100
Which Windows PowerShell cmdlet should you run?
A. Set-MailboxServer
B. Set-DatabaseAvailabilityGroup
C. New-DatabaseAvailabilityGroup
D. Add-MailboxDatabaseCopy
E. Add-DatabaseAvailabilityGroupServer
F. Set-MailboxDatabase
G. Set-ClientAccessServer
H. Set-ClientAccessArray
I. Set-PublicFolderDatabae
J. New-PublicFolderDatabase
K. Add-RoleGroupMember
L. Set-MailbxDatabaseCopy
M. New-MailboxDatabase
Answer: B
Microsoft 70-662 70-662 70-662
NO.6 Your network contains an Active Directory forest named fabrikam.com. The forest contains an
Exchange Server 2010 Service Pack 1 (SP1) organization.
All client computers run Microsoft Office Outlook 2003.A server named Ex1 hosts all public folders. You
upgrade all of the client computers to Outlook 2010.You need to remove all of the public folders from Ex1.
What should you do first.?
A. Modify the offline address book (OAB) distribution settings.
B. Modify the properties of the mailbox database.
C. Delete all of the public folders from the public folder database.
D. Perform an offline defragmentation of the public folder database files.
Answer: A
Microsoft기출문제 70-662인증 70-662자료
NO.7 You have an Exchange organization. All servers in the organization have Exchange Server 2010 SP1
installed.
You need to ensure that an equipment mailbox can be scheduled for meetings that occur during working
hours only.
What should you do from the properties of the mailbox?
A. Configure the Mailbox Features settings.
B. Configure the Resource Policy settings.
C. Enable the Resource Booking Attendant.
D. Configure the Resource In-Policy Requests settings.
E. Configure the Mail Flow settings.
F. Configure the Account settings.
G. Configure the Resource Out-of-Policy Requests settings.
H. Configure the Resource Information settings.
Answer: B
Microsoft 70-662 70-662최신덤프 70-662시험문제 70-662최신덤프
NO.8 You have an Exchange Server 2010 Service Pack1 (SP1) organization. The organization contains the
servers configured as shown in the following table
The Mailbox servers are members of a database availability group (DAG) named DAG1.The organization
also has a load balancing solution for Client Access. The load balancing solution has a
virtual IP address that is available by using the mail.contoso.com host name.
You create a new Client Access array that uses the outlook.contoso.com fully qualified name (FQFN)
You need to ensure that all users connect to outlook.contoso.com from Microsoft Outlook 2010.
Which Windows Powershell should you run
A. Set-MailbxDatabaseCopy
B. New-DatabaseAvailabilityGroup
C. Set-MailboxServer
D. Set-ClientAccessServer
E. New-PublicMailboxDatabase
F. New-PublicFolderDatabase
G. Set-ClientAccessArray
H. Add-MailboxDatabaseCopy
I. Set-DatabaseAvailabilityGroup
J. Set-PublicFolderDatabae
K. Add-RoleGroupMember
L. Add-DatabaseAvailabilityGroupServer
M. Set-MailboxDatabase
Answer: M
Microsoft시험문제 70-662 70-662자격증 70-662
NO.9 Your network contains two Active Directory forests named contoso and nwtraders. The contoso forest
contains Exchange 2003 SP2 Servers. The nwtraders forest contains Exchange 2010 SP1 Servers.
You need to move all mailboxes from contoso to nwtraders.
What should you do from nwtraders forest?
A. Create a mail enabled contact for each mailbox in contoso. Run the Move-Mailbox cmdlet.
B. Create a mail enabled user for each mailbox in contoso. Run the New-MoveRequest cmdlet.
C. Create a linked mailbox for each mailbox in contoso. Run Move-Mailbox cmdlet.
D. Create a shared mailbox for each mailbox in contoso. Run the New-MoveRequest cmdlet.
Answer: B
Microsoft인증 70-662 70-662 dump 70-662
NO.10 You are a network administrator for a company named Contoso, Ltd. Contoso has an Exchange Server
2010 Service Pack 1 (SP1) organization named contoso.com. The organization contains the following
Exchange servers: -Two Hub Transport servers -Two Edge Transport servers that have Edge
Subscriptions Contoso merges with another company named Fabrikam, Inc. Fabrikam has an Exchange
Server 2010 SP1 organization that uses the fabrikam.com SMTP domain.
All mail exchange (MX) records for fabrikam.com point to the contoso.com Edge Transport servers.
You deploy a solution for Contoso to journal all email messages by using Hub Transport rules.
You need to ensure that all email messages received by fabrikam.com users from the Internet are
journaled by the contoso.com Exchange organization.
What should you do?
A. From the Exchange Management Shell, run the new-accepteddornain -domaintypeinternalrelay
command.
B. From the Exchange Management Shell, run the new-sendconnector -addressspaces fabrikam.com
command.
C. From the Exchange Management Console (EMC), create an accepted domain that uses the
authoritative domain type.
D. From the Exchange Management Shell, run the new-receiveconnector -partner command.
E. From the Exchange Management Shell, run the new-accepteddornain -domaintypeexternalrelay
command.
F. From the Exchange Management Console (EMC), create an accepted domain that uses the internal
relay domain type.
Answer: C
Microsoft기출문제 70-662 70-662시험문제 70-662자격증 70-662 dump
NO.11 Your company has two offices. Each office is configured as an Active Directory site. The offices connect
to each other by using a congested WAN link. Each office has a direct, high-speed connection to the
Internet. Each site contains two Exchange Server 2010 Service Pack 1 (SP1) Hub Transport servers. You
need to ensure that email messages sent to the Internet from the Exchange organization are neverrouted
over the WAN link.
What should you do from each site?
A. From the Exchange Management Shell, run the Set-TransportConfig crndlet
B. From the Exchange Management Console (EMC), modify the properties of the accepted domain
C. From the Exchange Management Shell, run the Set-SendConnector cmdlet
D. From the Exchange Management Console (EMC), modify the properties of the Receive connector
E. From the Exchange Management Console (EMC), modify the properties of the Send connector
F. From the Exchange Management Console (EMC), modify the properties of the remote domain
G. From the Exchange Management Shell, run the Set-ForeignConnector cmdlet
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet
Answer: C
Microsoft시험문제 70-662 dump 70-662 70-662 dumps
NO.12 Your network contains an Active Directory domain. The domain contains one site.
You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client
Accessservers, two Hub Transport servers, and three Mailbox servers.
The mailbox servers are members of a database availability group (DAG) named DAG1.
You have a mailbox database named DB1.You configure two mailbox database copies of DB1.You verify
that both mailbox database copies have a status of Healthy.
You need to ensure that an administrator is notified when the health status of a mailbox database
copychanges.
What should you run from the Exchange Management Shell?
A. Test-WebServicesConnectivity
B. Test-SystemHealth
C. Test-AvailabilityService
D. checkdatabaseredundancy.ps1
E. Test-ReplicationHealth
F. Test-SmtpConnectivity
G. Get-MailboxDataboxCopyStatus
H. Retry-Queue
I. Test-MailFlow
J. Get-MailboxDatabase
K. Test-SenderId
L. Get-SenderIdConfig
M. Test-MapiConnectivity
N. Test-OutlookWebServices
Answer: D
Microsoft 70-662 dump 70-662최신덤프 70-662덤프 70-662
NO.13 Your network contains an Active Directory domain named contoso.com. You have an Exchange Server
2010 Service Pack 1 (SP1) organization. External users access their email by Outlook Web Apps. On you
need to ensure that the external users can log on to Outlook Web App without specifying a domain name.
Which cmdlet should you use?
A. Set-OrganizationConfig
B. Set-OwaVirtualDirectory
C. New-OrganizationRelationShip
D. New-OwaMailboxPolicy
Answer: B
Microsoft 70-662 dump 70-662기출문제
NO.14 You have an Exchange organization. All servers in the organization have Exchange Server 2010 SP1
installed.
You need to ensure that each user who sends a meeting request to a room mailbox receives a custom
message from the mailbox.
What should you do from the properties of the mailbox?
A. Configure the Mailbox Features settings.
B. Configure the Mail Flow settings.
C. Enable the Resource Booking Attendant.
D. Configure the Resource Information settings.
E. Configure the Resource In-Policy Requests settings.
F. Configure the Resource Out-of-policy Requests settings.
G. Configure the Account settings.
H. Configure the Resource Policy settings.
Answer: D
Microsoft 70-662 70-662시험문제 70-662
NO.15 You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The SMTP domain for
theorganization is contoso.com.
You enable the Exchange anti-spam features. You need to specify a quarantine mailbox for the Exchange
organization.
What should you do?
A. From the Exchange Management Console (EMC), modify the Content Filter agent.
B. Run the Set-ContentFilterConfig cmdlet from the Exchange Management Shell.
C. Run the Set-TransportConfig cmdlet from the Exchange Management Shell.
D. From the Exchange Management Console (EMC), modify the Recipient Filter agent.
E. Run the New-TransportRule cmdlet from the Exchange Management Shell.
F. Run the Set-OrganizationConfig cmdlet from the Exchange Management Shell.
G. From the Exchange Management Console (EMC), modify the Sender Filter agent.
H. Run the New-JournalRule cmdlet from the Exchange Management Shell.
Answer: B
Microsoft 70-662인증 70-662시험문제
NO.16 You have an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com.
All users access their mailbox by using Microsoft Outlook 2010.You need to ensure that the users can
prevent sensitive email messages from being forwarded to otherrecipients.
What should you first?
A. Configure Transport Layer Security (TLS) on all Send connectors
B. Install Active Directory Rights Management Services (AD RMS).
C. Run the Set-TransportConfig cmdlet.
D. Deploy Secure MIME.
Answer: B
Microsoft 70-662 70-662 dump
NO.17 The network contains an Active Directory domain. The domain contains one site.
You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client Access
servers, two Hub Transport servers, and users report that they fail to receive email messages from the
Internet.
You review the message tracking logs and discover that the organization failed to receive any email
messages from the Internet during the past hour.
You need to identify what is prevening the hub Transport servers from receiving email messages.
What should run from the Exchange Management Shell?
A. Test-WebServicesConnectivity
B. Test-MailFlow
C. Get-MailboxDatabase
D. Test-MapiConnectivity
E. Test-ReplicationHealth
F. Test-AvailabilityService
G. Get-SenderIdConfig
H. Test-SMTPConnectivity
I. Checkdatabaseseredundancy.ps1
J. Retry-Queue
K. Test-SenderID
L. Get-MailboxDatabaseCopyStatus
M. Test-SystemHealth
N. Test-OutlookWebServices
Answer: H
Microsoft자료 70-662 dump 70-662 70-662 pdf 70-662 pdf 70-662덤프
NO.18 Your network contains an Active Directory domain named contoso.com. All domain controllers run
Windows Server 2008 R2.You have a server named Server1 that runs Windows Server 2008 R2 Service
Pack 1 (SP1).You plan to install the following Exchange Server 2010 SP1 server roles on
Server1:-Mailbox-Client Access-Hub Transport
You need to prepare Served for the planned installation. You import the Server Manager module for
Windows Power Shell.
What should you do next?
A. From Windows PowerShell, run add-windowsfeature net-framework,rsat,adlds.
B. At the command prompt, run servermanagercmd and use the Exchange-Typical.xml template.
C. From Windows PowerShell, run add-windowsfeature net-framework. From the Exchange Server 2010
installation program, select the Automatically install Windows Server roles and features required for
Exchange Server check box.
D. At the command prompt, run servermanagercmd and use the Exchange-Elase.xml template.
E. At the command prompt, run setup /pl. From the Exchange Server 2010 installation program, select the
Automatically install Windows Server roles and features required for Exchange Server check box.
F. From Windows PowerShell, run add-windowsfeature
net-framework,rsat-adds,web-server,web-basic-auth.
Answer: C
Microsoft 70-662 70-662
NO.19 You have an Exchange Server 2010 Service Pack 1 (SP1) organization named fabrikam.com A partner
company has an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com. You
plan to implement federated delegation between fabrikam.com and contoso.com. You need to identify
which DNS records must be created to support federated delegation. Which DNS records should you
identify? (Choose all that apply.)
A. Host (A)
B. Mail exchanger (MX)
C. Host information (HINFO)
D. Text (TXT)
E. Mail group (MG)
Answer: AD
Microsoft 70-662자료 70-662 70-662 dump 70-662
NO.20 You have an Exchange Server 2010 Service Pack 1 (SP1) Mailbox server named Server1.You need to
ensure that a copy of each email message modified or deleted by a user named User1 isretained on
Server1.
What should you do?
A. Create a personal tag.
B. Enable single item recovery.
C. Enable message tracking
D. Enable a litigation hold
E. Create a retention policy
F. Create a journal rule
Answer: D
Microsoft 70-662최신덤프 70-662인증 70-662 70-662
Microsoft 70-662인증시험패스는 아주 어렵습니다. 자기에맞는 현명한 학습자료선택은 성공을 내딛는 첫발입니다. 퍼펙트한 자료만의 시험에 성공할수 있습니다. Pass4Tes시험문제와 답이야 말로 퍼펙트한 자료이죠. 우리Microsoft 70-662인증시험자료는 100%보장을 드립니다. 또한 구매 후 일년무료 업데이트버전을 받을 수 있는 기회를 얻을 수 있습니다.
댓글 없음:
댓글 쓰기