IBM 000-732 인증시험

거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면IBM인증 000-732시험은 무조건 패스해야 합니다. 하지만IBM인증 000-732시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는IBM인증 000-732시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전IBM인증 000-732덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는IBM인증 000-732영어버전덤프만 공부하시면 자격증을 딸수 있습니다.

ITExamDump의 IBM인증 000-732덤프는 거의 모든 실제시험문제 범위를 커버하고 있습니다.IBM인증 000-732시험덤프를 구매하여 덤프문제로 시험에서 불합격성적표를 받을시ITExamDump에서는 덤프비용 전액 환불을 약속드립니다.

IT인증시험이 다가오는데 어느 부분부터 공부해야 할지 망설이고 있다구요? 가장 간편하고 시간을 절약하며 한방에 자격증을 취득할수 있는 최고의 방법을 추천해드립니다. 바로 우리ITExamDump IT인증덤프제공사이트입니다. ITExamDump는 고품질 고적중율을 취지로 하여 여러분들인 한방에 시험에서 패스하도록 최선을 다하고 있습니다. IBM인증000-732시험준비중이신 분들은ITExamDump 에서 출시한IBM인증000-732 덤프를 선택하세요.

ITExamDump 에서 제공해드리는 IBM인증000-732시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. IBM인증000-732시험은ITExamDump 표IBM인증000-732덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.

시험 번호/코드: 000-732

시험 이름: IBM (DB2 9 for z/OS Database Administrator)

ITExamDump의IBM인증 000-732덤프의 인지도는 아주 높습니다. 인지도 높은 원인은IBM인증 000-732덤프의 시험적중율이 높고 가격이 친근하고 구매후 서비스가 끝내주기 때문입니다. ITExamDump의IBM인증 000-732덤프로IBM인증 000-732시험에 도전해보세요.

000-732 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-732.html

NO.1 A DBA wishes to audit all access to the non-audited table OWNER.EMPLOYEE. Assuming no
audit traces are started, which of the following steps are needed to audit access to this table?
A.-START TRACE AUDIT CLASS (5)
B.-START TRACE AUDIT CLASS (4, 5)
C.-START TRACE AUDIT CLASS (4, 5) and ALTER TABLE OWNER.EMPLOYEE AUDIT ALL
D.-START TRACE AUDIT CLASS (4, 5) and ALTER TABLE OWNER.EMPLOYEE DATA CAPTURE
CHANGES
Correct:C

IBM   000-732 dumps   000-732 dump

NO.2 An end-user indicates that the DRDA client application accessing DB2 for z/OS is very slow.
However, other local applications accessing the same tables are running fine. What would
indicate that this could be a DB2 problem?
A.Calculate the non-nested CLASS 1 CPU time minus non-nested CLASS 2 CPU time. If the value is high,
it suggests a problem in the DDF address space.
B.Investigate the CLASS 3 suspension time. As class 3 time includes the time that DB2 spends
sending/receiving network messages, a high value is a possible indication that the network is
experiencing a slow-down.
C.Calculate the non-nested CLASS 1 Elapsed time (ET) minus non-nested CLASS 2 ET. If the value is
high, this can only be caused by spending most time in the application, and therefore the application
should be investigated.
D.Check to see if the DB2 remote connection can become inactive at commit (Type 2 inactive). If not, this
leads to a high non-nested CLASS 1 ET and is likely the cause of the performance problem. Inactive
connections will use less CPU than threads that stay active all the time.
Correct:A

IBM   000-732 dumps   000-732 dump

NO.3 If an object is created statically by a role within a trusted context and the ROLE AS OBJECT
OWNER clause is specified, who becomes the object owner when executing the package?
A.The role
B.The schema name
C.The owner keyword
D.The current SQLID (if set)
Correct:A

IBM   000-732 dumps   000-732 dump

NO.4 Which of the following is the correct configuration in a two way DB2 datasharing group?
A.MVSA (DB2A, active log A, workfile A) MVSB (DB2B, active log B, workfile B) Shared BSDS and
catalog and directory Coupling facility one Sysplex timer one
B.MVSA (DB2A, BSDS A, active log A, workfile A) MVSB (DB2B, BSDS B, active Log B, workfile B)
Shared catalog and directory Coupling facility one Sysplex timer one
C.MVSA (DB2A, BSDS A, active log A, workfile A, catalog & directory A) MVSB (DB2B, BSDS B, active
log A, workfile A, catalog & directory B) Coupling facility one Sysplex timer one
D.MVSA (DB2A, BSDS A, active log A, workfile A, catalog & directory A) MVSB (DB2B, BSDS B, active
log B, workfile B, catalog & directory B) Coupling facility one Sysplex timer one
Correct:B

IBM   000-732 dumps   000-732 dump

NO.5 A DBA was examining the Log Statistics, Log Activity section in the OMEGAMON Performance
Expert Tool and noticed a large value in the field UNAVAILABLE OUTPUT LOG BUFF. This is an
important and critical performance metric. What does this performance metric mean?
A.The OUTPUT BUFFER field of installation panel DSNTIPL was specified too large so memory was not
utilized and wasted.
B.The active logs were not stripped by DFSMS and the active log data sets have to be processed
sequentially so many times.
C.The active log data sets were not placed on different volumes to reduce contention so a large amount of
I/O activity showed up in the OUTPUT BUFFER field.
D.The OUTPUT BUFFER field of installation panel DSNTIPL was specified too small so application has to
wait while DB2 was busy writing the Active log data sets.
Correct:D

IBM   000-732 dumps   000-732 dump

NO.6 An application has been running in production for a long time. The size of the objects involved
has not changed, but the application is running much slower than in the beginning. When should
the DBA consider manually REBINDing the application?
A.After REORGing the objects with inline statistics.
B.When dynamic SQL is used, but only after REORG and RUNSTATS has been performed.
C.Actually it is NOT recommended to perform manual rebinds but rather have DB2 perform automatic
rebinds.
D.If the size of the objects has not changed after gathering RUNSTATS data, the access path is very
unlikely to change, and therefore no REBIND is needed.
Correct:A

IBM   000-732 dumps   000-732 dump

NO.7 At which of the following times is the access control authorization routine (DSNX@XAC)
invoked?
A.At DB2 startup.
B.When executing a DB2 GRANT statement.
C.When DB2 has cached authorization information.
D.During any authorization check if NO was specified in the USE PROTECTION field of the DSNTIPP
panel.
Correct:A

IBM   000-732 dumps   000-732 dump

NO.8 There are dynamic SQL statements running in a subsystem that need to have their host
variables reoptimized at run-time, however the distribution of the values does not change very
much between execution. What is the most optimal bind parameter for these statements?
A.REOPT(NONE)
B.REOPT(ONCE)
C.REOPT(VARS)
D.REOPT(ALWAYS)
Correct:B

IBM   000-732 dumps   000-732 dump

NO.9 Which of the following DSNZPARMs is necessary to influence access path selection for certain
queries?
A.STDSQL
B.OPTHINTS
C.PARTKEYU
D.DESCSTAT
Correct:B

IBM   000-732 dumps   000-732 dump

NO.10 A DBA has been required by a new company policy to implement a new DB2 security method.
The company would like to separate the authorization IDs that can execute plans and packages
from the authorization IDs that can create new plans and packages. Which of the following explicit
system privileges allows the user to create new plans and packages without being able to also
execute them?
A.BINDADD
B.CREATEIN
C.BINDAGENT
D.CREATEDBA
Correct:C

IBM   000-732 dumps   000-732 dump

NO.11 What is the purpose of the following catalog health query? SELECT BNAME, BCREATOR,
BTYPE, DNAME FROM SYSIBM.SYSPLANDEP PD WHERE BTYPE IN ('T', 'V', 'A') AND NOT EXISTS
(SELECT * FROM SYSIBM.SYSTABLES WHERE CREATOR = PD.BCREATOR AND NAME =
PD.BNAME AND TYPE = PD.BTYPE);
A.For every row in SYSTABLES that indicates a dependency upon a table, view, or alias, there should be
a corresponding row in SYSPLANDEP.
B.For every row in SYSPLANDEP that indicates a dependency upon a table, view, or alias, there should
be a corresponding row in SYSTABLES.
C.For every row in SYSPLANDEP that indicates a dependency upon a table space, view, or a table that
has been altered, there should be a corresponding row in SYSTABLES.
D.For every row in SYSPLANDEP that indicates a dependency upon a table space, a table with a
VARCHAR column, or alias, there should be a corresponding row in SYSTABLES.
Correct:B

IBM   000-732 dumps   000-732 dump

NO.12 A DBA needs to use the DSN command processor to delete DB2 packages that are no longer
needed. Which of the following choices is correct for the DBA to use?
A.SPUFI or QMF with the DROP statement
B.FREE Package (..)
C.DROP Package (..)
D.DROP PLAN () PKLIST (..)
Correct:B

IBM   000-732 dumps   000-732 dump

NO.13 Which parameter in WLM Application Environment controls the # of concurrent stored
procedures that can run in that particular environment?
A.NUMSRB
B.NUMTHR
C.NUMCTK
D.NUMTCB
Correct:D

IBM   000-732 dumps   000-732 dump

NO.14 Which of the following buffer pool thresholds CANNOT be changed by the DBA?
A.Deferred write threshold (DWQT)
B.Immediate write threshold (IWTH)
C.Vertical deferred write threshold (VDWQT)
D.Virtual buffer pool assisting parallel sequential threshold (VPXPSEQT)
Correct:B

IBM   000-732 dumps   000-732 dump

NO.15 Which statement best describes how multi-row fetch improves performance?
A.It reduces the amount of programming required.
B.It reduces the number of SQL statements issued.
C.It reduces the amount of data sent over a network.
D.It reduces the amount of I/O required to read a table.
Correct:B

IBM   000-732 dumps   000-732 dump

NO.16 A DB2 V9 system that is in New Function Mode:
A.cannot fall back.
B.can fall back to Compatibility Mode.
C.can fall back to New Function Mode*.
D.can fall back to Compatibility Mode*.
Correct:D

IBM   000-732 dumps   000-732 dump

NO.17 Which of the following RACF profiles would be used to allow IMS to access DB2 DSN1?
A.DSN1.IMS
B.DSNR.IMS
C.DSN1.MASS
D.DSN1.SASS
Correct:C

IBM   000-732 dumps   000-732 dump

NO.18 An audit trace shows that TSO user TSOID1, with DBADM authority, is continually attempting to
update a table in DB2 subsystem DSN1 that is not supposed to be updated. Which of the following
will prevent access to the DB2 subsystem?
A.REVOKE DBADM FROM TSOID1
B.Change TSOID1's access to DSNR resource class DSN1.TSO to NONE
C.Change TSOID1's access to DSNR resource class DSN1.BATCH to READ
D.Change TSOID1's access to DSNR resource class DSN1.BATCH to NONE
Correct:D

IBM   000-732 dumps   000-732 dump

NO.19 A company uses TRUSTED CONTEXT "ERP1" and ROLE "ERP_ROLE" as a security mechanism
to limit security exposure for an application. All the DB2 objects (databases, table spaces, tables,
indexes, views, plans and packages) have been created by that ROLE. The ROLE "ERP_ROLE"
has been assigned to User ID "DBA01" in order to perform DBA related tasks. When the user
"DBA01" leaves the company, the authorization ID is removed. Which of the following statements
are correct? (Select two answers)
A.None of these DB2 objects need to be recreated to re-grant the privileges.
B.The related plans and packages have to be recreated and the privileges re-granted.
C.When removing user "DBA01" privileges, none of these DB2 objects need to be dropped.
D.Only the related databases, table spaces, tables, indexes and views need to be recreated and the
privileges re-granted.
E.To remove the privileges of user "DBA01" on these related plans and packages, they have to be
dropped and as a result all associated privileges are revoked.
Correct:A C

IBM   000-732 dumps   000-732 dump

NO.20 Given the following RUNSTATS utility statement: RUNSTATS TABLESPACE
DB2CERTDB.MYTBLSPC1 TABLE (MYTABLE1) COLUMN(ALL) INDEX REPORT YES UPDATE ALL
HISTORY ALL which of the following statements is true?
A.Cardinality statistics will only be collected on all columns of all indexes on table MYTABLE1.
B.Cardinality statistics will only be collected on the first column of each index on table MYTABLE1.
C.Cardinality statistics will only be collected on all columns of each index associated with table space
MYTBLSPC1.
D.Cardinality statistics will only be collected on the first column of each index associated with table space
MYTBLSPC1.
Correct:D

IBM   000-732 dumps   000-732 dump

IBM인증000-732시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. 근 몇년간 IT인사들에게 최고의 인기를 누리고 있는 과목으로서 그 난이도 또한 높습니다. 자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. IBM인증000-732시험을 패스하고 싶은 분들은ITExamDump제품으로 가보세요.