IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. IBM인증 C2010-573시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITExamDump는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITExamDump의IBM인증 C2010-573덤프로 자격증을 편하게 취득하는게 어떨가요?
우리ITExamDump 사이트에서IBM C2010-573관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다.빨리 우리 ITExamDump의 덤프를 만나보세요.
ITExamDump를 선택함으로 여러분은 IBM 인증C2010-573시험에 대한 부담은 사라질 것입니다.우리 ITExamDump는 끊임없는 업데이트로 항상 최신버전의 IBM 인증C2010-573시험덤프임을 보장해드립니다.만약 덤프품질을 확인하고 싶다면ITExamDump 에서 무료로 제공되는IBM 인증C2010-573덤프의 일부분 문제를 체험하시면 됩니다.ITExamDump 는 100%의 보장도를 자랑하며IBM 인증C2010-573시험을 한번에 패스하도록 도와드립니다.
IBM인증C2010-573시험의자격증은 여러분에 많은 도움이 되리라 믿습니다. 하시는 일에서 한층 더 업그레이드될 것이고 생활에서도 분명히 많은 도움이 될 것입니다. 자격증취득 즉 재산을 얻었죠.IBM인증C2010-573시험은 여러분이 it지식테스트시험입니다. ITExamDump에서는 여러분의 편리를 위하여 ITExamDump만의 최고의 최신의IBM C2010-573덤프를 추천합니다. ITExamDump를 선택은 여러분이 최고의 선택입니다. ITExamDump는 제일 전면적인IBM C2010-573인증시험자료의 문제와 답을 가지고 잇습니다.
시험 번호/코드: C2010-573
시험 이름: IBM (IBM Tivoli Netcool/Impact V6.1 Implementation)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 123 문항
업데이트: 2014-03-19
ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 ITExamDump 는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서 우리만의 이미지를 지키고 있습니다. ITExamDump 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록 합니다.
ITExamDump 에서 출시한 제품 IBM인증C2010-573시험덤프는 고득점으로 시험을 통과한 많은 분들이 검증한 완벽한 시험공부자료입니다. IT업계에 몇십년간 종사한 전문가들의 경험과 노하우로 제작된IBM인증C2010-573덤프는 실제 시험문제에 대비하여 시험유형과 똑같은 유형의 문제가 포함되어있습니다.시험 불합격시 불합격성적표로 덤프비용환불신청을 약속드리기에 아무런 우려없이 덤프를 구매하여 공부하시면 됩니다.
C2010-573 덤프무료샘플다운로드하기: http://www.itexamdump.com/C2010-573.html
NO.1 Which utility edits the installed GUI server deployment and maps the roles to the
specified users?
A. roles.[bat|sh]
B. user-roles.[bat|sh]
C. update-impact-roles.[bat|sh]
D. impact-security-roles.[bat|sh]
Answer: C
IBM dumps C2010-573 C2010-573
NO.2 What must occur before a data type can be defined?
A. Data Type service must be started
B. Policy Activator service is activated
C. Data Source definition is configured
D. ObjectServer Event Reader is activated
Answer: C
IBM시험문제 C2010-573최신덤프 C2010-573 dump C2010-573 C2010-573 pdf
NO.3 How is the name of the IBM Tivoli N etc oo I/Imp act Server Instance on the console
identified?
A. check the IBM Installer utility litslll.sh to show the Impact Server Instance Names that have
been set up
B. check the TIPProfile/logs/server1 directory - the SystemOutlog holds the Impact Service
Instance
name
C. use the nci_server command line utility to show the Impact Server Instance Names that
have been set
up
D. check the impact/etc directory - all Impact Server Instance-related files use the Instance
Name in the
beginning of every file name
Answer: D
IBM최신덤프 C2010-573 C2010-573인증 C2010-573인증
NO.4 Which functional step should be completed when designing an IBM Tivoli
Netcool/lmpact V6.1
solution?
A. write an enrichment policy
B. develop Netcool/lmpact startup scripts
C. test high availability and fail-over scenarios
D. determine methods of achieving customer requirements
Answer: D
IBM자격증 C2010-573 C2010-573 C2010-573
NO.5 Given only command line access, where is it verified that a newly started IBM Tivoli
Netcool/lmpact
Server instance is registering itself as a slave or primary in a cluster?
A. in the server.log file
B. in the netcool.log file
C. in the systemOut.log file
D. using the nci_server utility
Answer: B
IBM C2010-573 C2010-573덤프 C2010-573인증 C2010-573 C2010-573
NO.6 What is true about the LDAP DSA?
A. It does not support data saved in UTF-8 format.
B. It does not retrieve information from LDAPV2/V3.
C. It allows IBM Tivoli Netcool/lmpactto add, modify, or delete information managed by the
LDAP server.
D. It does not allow IBM Tivoli Netcool/lmpactto add. modify, or delete information managed
by the LDAP
server.
Answer: D
IBM C2010-573덤프 C2010-573 C2010-573 C2010-573 C2010-573
NO.7 What must be done to receive an IBM Tivoli Netcool/OMNIbus event when a policy run
raises any
unknown exception?
A. use the action function exceptionnameOand add policy code to insert the event between
the brackets
B. use handle exceptionnameO in the policy and add policy code to insert the event between
the brackets
C. create an ExceptionHandlerPolicy that inserts the event and define this in the Policytogger
configuration
D. configure the Self-Monitoring service to log exceptions into the ObjectServer defined in the
service
configuration
Answer: C
IBM덤프 C2010-573 C2010-573시험문제 C2010-573 dump
NO.8 An IBM Tivoli Netcool/lmpact V6.1 system is configured to perform event enrichment
by retrieving
ObjectServer events which have an empty Location field. Which Service Log can be used to
verify that
Netcool/lmpact is selecting events from the ObjectServer based upon that condition?
A. the PolicyLogger service
B. the PolicyActivator service
C. the OMNIbusEventReader service
D. the OMNIbusEventListener service
Answer: C
IBM덤프 C2010-573 C2010-573덤프 C2010-573 dumps C2010-573최신덤프 C2010-573
NO.9 A new Impact Server will be installed using the console mode of the installer
application. Which
statement is true?
A. All default ports must be available.
B. The installer will not check if the required ports are available.
C. A starting point of ports can be selected if the default ports are not available.
D. The installer will adapt the required ports if some are tested as in use during the
installation.
Answer: C
IBM인증 C2010-573 C2010-573 dumps C2010-573인증
NO.10 In which folder are the IBM Tivoli Netcool/lmpact V6.1 service logs stored?
A. $NCHOME/logs
B. $IMPACT_HOME/log
C. $IMPACT_HOME/Iogs
D. $IMPACT_HOME/services/logs
Answer: C
IBM C2010-573 C2010-573기출문제 C2010-573자료 C2010-573인증
NO.11 Which component of IBM WebSphere is installed with IBM Tivoli Netcool/lmpact V6.1?
A. WebSphere MQ
B. WebSphere Portal Server
C. WebSphere Process Server
D. Embedded WebSphere Application Server
Answer: D
IBM C2010-573 C2010-573 C2010-573인증
NO.12 Which tool will start a policy from the command line?
A. nci_crypt
B. nci_policy
C. nci_trigger
D. nci_import
Answer: C
IBM자료 C2010-573 C2010-573 C2010-573
NO.13 On a server with only command line access, the server in an IBM Tivoli
Netcool/lmpact cluster is
identified as acting as a primary server by using which command line utility?
A. nci_server
B. nci_trigger
C. nci_get_primary
D. nci_findendpoint
Answer: C
IBM C2010-573시험문제 C2010-573 C2010-573 dumps
NO.14 What is the minimum memory requirement for installing a Tivoli Integrated Portal profile
and an IBM
Tivoli Netcool/lrnpact profile running on the same physical machine?
A. 2 GB
B. 4 GB
C. 6 GB
D. 8 GB
Answer: C
IBM C2010-573 pdf C2010-573덤프
NO.15 Which step is required to design an IBM Tivoli Netcool/lmpact V6.1 solution from
stakeholder
requirements?
A. Determine if the correct Java version is installed.
B. Create an architecture and a raw functional design of policies.
C. Determine if enough disk space is provided on the installation servers.
D. Interview the operational staff to determine their most efficient way to resolve a problem
Answer: B
IBM시험문제 C2010-573 C2010-573인증 C2010-573기출문제 C2010-573덤프
NO.16 What are two ways Data Source Adapters are used in IBM Tivoli Netcool/lmpact
V6.1? (Choose two.)
A. to monitor Netcool/lmpact services
B. to communicate with external data sources
C. to extend the capabilities of Netcool/lmpact
D. to apply product fixes to the Netcool/lmpact Server
E. to start the policy logging service in Netcool/lmpact
Answer: B,C
IBM C2010-573 C2010-573 C2010-573 C2010-573
NO.17 Which command line function should be executed prior to applying a product fix or
upgrading the IBM
Tivoli Netcool/lmpact Server as best practice.?
A. nci_crypt
B. nci_policy
C. nci_trigger
D. nci_export
Answer: D
IBM C2010-573 C2010-573 C2010-573 dumps
NO.18 Which three IBM Tivoli Netcool/lmpact roles in Tivoli Integrated Portal can be used to
control users
access to navigation pages in the GUI and to permit users to unlock their own files?
A. impactSuperUser. impactFullAccessUser, and impactOpViewUser
B. impactAdminUser, impactReadWriteUser, and impactOpViewUser
C. impactAdminUser, impactFullAccessUser, and impactOpViewUser
D. impactAdminUser, impactFullAccessUser, and impactReadOnlyUser
Answer: C
IBM최신덤프 C2010-573 C2010-573덤프 C2010-573 dumps C2010-573
NO.19 What is the purpose of a project in IBM Tivoli Netcool/lmpact V6.1?
A. It allows for creating subsets of the elements stored in the global repository.
B. It allows for creating subsets of the elements stored in the Impact repository.
C. It allows for creating subsets of the elements stored across cluster members.
D. It allows for creating supersets of the elements stored in the global repository.
Answer: A
IBM C2010-573최신덤프 C2010-573 C2010-573 pdf
NO.20 In order for IBM Tivoli Netcool/lmpact V6.1 to start using the ObjectServer for
authentication, the server
must be configured so that it can map the roles that the application exposes to groups and/or
users
managed in IBM Tivoli Netcool/OMNIbus. Which file must be edited for this purpose?
A. omnibus.conf
B. omnibususers
C. guiserver.setting
D. objectserver.conf
Answer: C
IBM C2010-573 C2010-573시험문제 C2010-573
ITexamdump의 9L0-620덤프의 VCE테스트프로그램과 LOT-927덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_TERP10_65시험에 대비한 고품질 덤프와 646-048시험 최신버전덤프를 제공해드립니다. 최고품질 000-596시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기