IBM인증 000-744시험은 중요한 IT인증자격증을 취득하는 필수시험과목입니다IBM인증 000-744시험을 통과해야만 자격증 취득이 가능합니다.자격증을 많이 취득하면 자신의 경쟁율을 높여 다른능력자에 의해 대체되는 일은 면할수 있습니다.ITExamDump에서는IBM 인증000-744시험대비덤프를 출시하여 여러분이 IT업계에서 더 높은 자리에 오르도록 도움드립니다. 편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요.
여러분은 우선 우리 ITExamDump사이트에서 제공하는IBM인증000-744시험덤프의 일부 문제와 답을 체험해보세요. 우리 ITExamDump를 선택해주신다면 우리는 최선을 다하여 여러분이 꼭 한번에 시험을 패스할 수 있도록 도와드리겠습니다.만약 여러분이 우리의 인증시험덤프를 보시고 시험이랑 틀려서 패스를 하지 못하였다면 우리는 무조건 덤프비용전부를 환불해드립니다.
IBM인증 000-744시험이 너무 어려워 보여서 오르지못할 산처럼 보이시나요? 그건ITExamDump의 IBM인증 000-744시험문제에 대비하여 제작한IBM인증 000-744덤프가 있다는 것을 모르고 있기때문입니다. IBM인증 000-744시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 IBM인증 000-744덤프로 시험공부를 해보세요.시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다.
시험 번호/코드: 000-744
시험 이름: IBM (DS4000 Technical Version 1)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 140 문항
업데이트: 2014-03-27
인재도 많고 경쟁도 많은 이 사회에, IT업계인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지키고 있습니다.우리ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다.
000-744 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-744.html
NO.1 When performing an array migration, what is NOT required?
A. verification that there is no logical drive name duplication between the source and target systems
B. removal of mappings for all logical drives within the array being migrated
C. documenting the stripe order of the drives in the array for proper placement on the target subsystem
D. Advanced Maintenance Place Array Offline
Answer: C
IBM pdf 000-744덤프 000-744 000-744인증
NO.2 To generate a premium feature key that can be installed on a DS4000 subsystem, you must provide
certain information to IBM. This information includes the IBM machine type/model and what additional
information?
A. serial number, activation code, feature enable identifier and e-mail address
B. serial number, activation code, and e-mail address
C. activation code, e-mail address, controller firmware level
D. serial number, and e-mail address, drive firmware level
Answer: A
IBM자격증 000-744 dumps 000-744자격증 000-744자격증
NO.3 When examining a profile you see the following:
Drive at Enclosure 5, Slot 8 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 8]
How should this be configured for enclosure loss protection?
A. Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 9]
B. Drive at Enclosure 3, Slot 1 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 3, slot 1]
C. Drive at Enclosure 5, Slot 17 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 17]
D. Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 15, slot 19]
Drive at Enclosure 15, Slot 19 [mirrored pair with drive at enclosure 5, slot 9]
Answer: B
IBM자료 000-744 000-744자격증 000-744
NO.4 A customer wants to use SATA drives to reduce costs. Which application matches SATA use?
A. TSM
B. Exchange
C. application with low IOPS
D. write once, read many times
Answer: C
IBM자격증 000-744 000-744 000-744
NO.5 Three hosts are redundantly connected to a DS4000 system. Two are running a non-clustered
Windows 2003 Server and the other is running Red Hat Linux. How many Storage Partitions are used in
this configuration?
A. 0
B. 1
C. 3
D. 8
Answer: C
IBM자격증 000-744 000-744시험문제
NO.6 What is the minimum number of HDDs required for RAID 6?
A. 1
B. 2
C. 3
D. 4
Answer: D
IBM최신덤프 000-744 000-744 000-744 pdf
NO.7 When creating a FlashCopy of a logical drive, a repository logical drive is created. The repository
logical drive is for metadata and copy-on-write data when a change is made to the FlashCopy source
logical drive. By default, what is its size?
A. 10% of the source volume
B. 20% of the source volume
C. 50% of the source volume
D. 100% of the source volume
Answer: B
IBM자격증 000-744 dump 000-744 pdf 000-744 000-744자료
NO.8 What is one disadvantage of managing a storage subsystem through the Fibre Channel IO path?
A. The fibre cable used for data IO cannot be used for management commands.
B. An access logical drive is required to communicate with the controllers.
C. Management commands cannot be encapsulated by the Fibre Channel protocol.
D. Ethernet cables to the controllers are also required to send management commands.
Answer: B
IBM자료 000-744 000-744덤프 000-744자격증
NO.9 Which statement about DS4000 firmware upgrades is true?
A. The controller firmware and NVSRAM files are closely tied to each other and must be installed in the
proper combination.
B. Controller firmware and NVSRAM upgrades always require the ESM firmware to be upgraded at the
same time.
C. Only one controller must be accessible via the Ethernet or fiber in order to perform a controller
firmware upgrade.
D. The controller firmware and NVSRAM are independent from each other and can be upgraded at
different times.
Answer: A
IBM최신덤프 000-744 dumps 000-744 000-744기출문제
NO.10 When configuring a customer's multimedia sequential I/O environment, what must you do?
A. use a small segment size with many disks
B. select a stripe size that is the same or an even multiple of the I/O size
C. use small segment size in conjunction with RAID 0
D. select a segment size that minimizes the occurrences of a single I/O on multiple drives
Answer: B
IBM 000-744 000-744시험문제 000-744 dumps
NO.11 In addition to the storage administrator's e-mail address, what information do you need to set up
e-mail alerts to be sent to the storage administrator?
A. sender's SMTP server address, the sender's e-mail address
B. sender's POP server address, the sender's e-mail address
C. storage administrator's POP server address, the sender's e-mail address
D. storage administrator's SMTP server address, the sender's e-mail address
Answer: A
IBM인증 000-744 dump 000-744최신덤프 000-744 000-744
NO.12 In the exhibit, which management method is being used?
A. in-band
B. rlogin
C. client-host-band
D. out-of-band
Answer: D
IBM시험문제 000-744 dumps 000-744자료 000-744 000-744
NO.13 You arrive at a customer site to implement the DS4000 solution and find that the customer wants to use
RAID 1+0 instead of RAID 5 for everything. What is a possible concern in this situation?
A. capacity
B. random IO performance
C. throughput performance
D. disk rebuild times
Answer: A
IBM 000-744최신덤프 000-744 000-744 dump 000-744
NO.14 A customer is combining two separate IT operations in one central location. They are using a DS4800.
Performance has been marginal. You look at the DS4800 Performance Monitor and observe that they are
well within the DS4800 performance specifications. Which tool can be used to determine the cause of the
problem?
A. Capacity Magic
B. Bandwidth Estimator
C. IOMeter
D. Disk Magic
Answer: D
IBM 000-744 000-744 pdf 000-744 000-744 pdf
NO.15 How do you configure SNMP traps in the Storage Manager GUI?
A. from the Subsystem Management window, use the Storage Subsystem menu
B. from the Subsystem Management window, use the Advanced menu
C. from the Enterprise Management window, use the Advanced menu
D. from the Enterprise Management window, use the Edit menu
Answer: D
IBM 000-744인증 000-744 pdf
NO.16 Which statement is FALSE regarding hot spare drives in the DS4000 subsystem?
A. The storage server will attempt to find a spare in the same enclosure as the failed drive first.
B. The storage server will give preference to a spare the same size as the failed drive.
C. The storage server will use a spare with at least the same capacity as the failed drive.
D. The controller may use a spare that is larger than the failed drive and block the remaining capacity
from use.
Answer: B
IBM시험문제 000-744 000-744덤프 000-744기출문제
NO.17 In the Major Event Log (MEL), what does immediate Availability Initialization (IAF) completed on
logical drive" indicate?
A. The drive has been internally reformatted.
B. The drive has just become accessible by the host.
C. LUN has just been replaced.
D. Hot sparing has occurred.
Answer: A
IBM 000-744 dumps 000-744 000-744
NO.18 What does a flashing green LED on a drive indicate?
A. status ok
B. drive active
C. failed drive
D. hot spare in use
Answer: B
IBM 000-744 000-744자격증 000-744자료 000-744
NO.19 What best describes a drive in eplaced status?
A. a drive that has replaced a failed drive and needs to be revived in order to complete the data recovery
process
B. a temporary status for a drive that has replaced a failed drive, but has not yet been reconstructed
C. a hot spare that has spared out for a failed drive in an array causing the hot spare to become the active
drive in the array
D. the final state of a drive that has replaced a failed drive and has been reconstructed
Answer: B
IBM 000-744최신덤프 000-744 000-744인증
NO.20 You have been called in to assist the storage administrator who has been using Global Mirror with an
Enhanced Remote Mirroring (ERM) configuration to mirror the company inventory database from
headquarters to a data warehouse at a remote site. The storage administrator has been re-evaluating this
approach and needs your help to change the mirroring mode to Metro Mirroring for better control over
data going to the remote site. What must you do to help the storage administrator make the change?
A. advise the storage administrator to purchase two new licenses
B. break and re-establish the mirror relationship
C. back up the inventory data to tape
D. make the mode change in Storage Manager
Answer: D
IBM인증 000-744자격증 000-744 dumps 000-744인증 000-744기출문제
ITexamdump의 70-480덤프의 VCE테스트프로그램과 HP2-N37덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 642-447시험에 대비한 고품질 덤프와 MB3-700시험 최신버전덤프를 제공해드립니다. 최고품질 000-N34시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기