Microsoft인증 070-521-Csharp시험을 준비하기 위해 잠도 설쳐가면서 많이 힘들죠? ITExamDump덤프가 고객님의 곁을 지켜드립니다. ITExamDump에서 제공해드리는Microsoft인증 070-521-Csharp덤프는 실제Microsoft인증 070-521-Csharp시험문제를 연구하여 만든 공부자료이기에 최고의 품질을 자랑합니다. ITExamDump덤프를 열심히 공부하여 멋진 IT전문가의 꿈을 이루세요.
ITExamDump는 여러분이 빠른 시일 내에Microsoft 070-521-Csharp인증시험을 효과적으로 터득할 수 있는 사이트입니다.Microsoft 070-521-Csharp덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서Microsoft 070-521-Csharp관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의Microsoft 070-521-Csharp덤프로 자신 있는 시험준비를 하세요.
시험 번호/코드: 070-521-Csharp
시험 이름: Microsoft (UPG:Trans MCPD.NET Frmwk 3.5 Dev Skil to .NET 4 Wndws App De)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 108 문항
업데이트: 2014-02-07
Microsoft인증070-521-Csharp시험을 패스하기가 어렵다고 하면 합습가이드를 선택하여 간단히 통과하실 수 잇습니다. 우리ITExamDump에서는 무조건 여러분을 위하여 관연 자료덤프 즉 문제와 답을 만들어낼 것입니다. 우리덤프로Microsoft인증070-521-Csharp시험준비를 잘하시면 100%Microsoft인증070-521-Csharp시험을 패스할 수 있습니다. ITExamDump덤프로 여러분은Microsoft인증070-521-Csharp시험을 패스는 물론 여러분의 귀증한 간도 절약하실 수 있습니다.
ITExamDump의 Microsoft인증 070-521-Csharp덤프를 공부하여Microsoft인증 070-521-Csharp시험을 패스하는건 아주 간단한 일입니다.저희 사이트에서 제작한Microsoft인증 070-521-Csharp덤프공부가이드는 실제시험의 모든 유형과 범위가 커버되어있어 높은 적중율을 자랑합니다.시험에서 불합격시 덤프비용은 환불신청 가능하기에 안심하고 시험준비하시면 됩니다.
Microsoft인증 070-521-Csharp시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 Microsoft인증 070-521-Csharp시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의Microsoft인증 070-521-Csharp덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.
요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 ITExamDump의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에Microsoft 070-521-Csharp인증시험을 패스함으로 여러분의 발전공간을 넓혀줍니다.
Microsoft인증070-521-Csharp시험을 패스하여 자격증을 취득한다면 여러분의 미래에 많은 도움이 될 것입니다.Microsoft인증070-521-Csharp시험자격증은 it업계에서도 아주 인지도가 높고 또한 알아주는 시험이며 자격증 하나로도 취직은 문제없다고 볼만큼 가치가 있는 자격증이죠.Microsoft인증070-521-Csharp시험은 여러분이 it지식테스트시험입니다.
070-521-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-521-Csharp.html
NO.1 A Windows Communication Foundation (WCF) client uses the following service contract. (Line
numbers are included for reference only.)
01 [ServiceContract]
02 public interface IService
03 {
04 [OperationContract]
05 string Operation1();
06 [OperationContract]
07 string Operation2();
08 }
You need to ensure that all calls to Operation1 and Operation2 from the client are encrypted and signed.
What should you do?
A. Set the ProtectionLevel property in line 01 to EncryptAndSign.
B. Set the ProtectionLevel property in line 04 and line 06 to Sign.
C. Add a SecurityCriticalAttribute for each operation.
D. Add a SecuritySafeCriticalAttribute for each operation.
Answer: A
Microsoft최신덤프 070-521-Csharp덤프 070-521-Csharp기출문제 070-521-Csharp 070-521-Csharp자료
NO.2 You are building a client for a Windows Communication Foundation (WCF) service.
You need to create a proxy to consume this service.
Which class should you use?
A. ChannelFactory<TChannel>
B. ServiceHost
C. ClientRuntime
D. CommunicationObject
Answer: A
Microsoft pdf 070-521-Csharp 070-521-Csharp 070-521-Csharp 070-521-Csharp dumps
NO.3 You are developing a Windows Communication Foundation (WCF) service that reads messages from
a public non-transactional MSMQ queue.
You need to configure the service to read messages from the failed-delivery queue.
Which URI should you specify in the endpoint configuration settings of the service?
A. net.msmq://localhost/msmq$;FailedMessages
B. net.msmq://localhost/msmq$;DeadLetter
C. net.msmq://localhost/system$;DeadXact
D. net.msmq://localhost/system$;DeadLetter
Answer: D
Microsoft시험문제 070-521-Csharp 070-521-Csharp 070-521-Csharp자료 070-521-Csharp
NO.4 Your Windows Communication Foundation (WCF) client application uses HTTP to communicate with
the service.
You need to enable message logging and include all security information such as tokens and nonces in
logged messages.
What should you do?
A. In the application configuration file, add the logKnownPii attribute to the message logging diagnostics
source and set the value of the attribute to true.
Generate the ContosoService class using the Add Service Reference wizard.
Add a reference to System.ServiceModel.Routing.dll.
Add the following code segment.
ContosoService client = new ContosoService();
SoapProcessingBehavior behavior = new SoapProcessingBehavior();
behavior.ProcessMessages = true;
client.Endpoint.Behaviors.Add(behavior);
B. In the application configuration file, add the following XML segment to the system.serviceModel
configuration section group.
<diagnostics>
<messageLogging logMessagesAtTransportLevel="true"
logEntireMessage="true" />
</diagnostics>
C. In the machine configuration file, add the following XML segment to the system.serviceModel
configuration section.
<machineSettings enableLoggingKnownPii="true" />
Generate the ContosoService class using the Add Service Reference wizard.
Add the following code segment.
ContosoService client = new ContosoService();
client.Endpoint.Behaviors.Add(new CallbackDebugBehavior(true));
D. In the machine configuration file, add the following XML segment to the system.serviceModel
configuration section.
<machineSettings enableLoggingKnownPii="true" />
In the application configuration file, add the logKnownPii attribute to the message logging diagnostics
source and set the value of the attribute to true.
In the application configuration file, add the following XML segment to the system.serviceModel
configuration section group.
<diagnostics>
<messageLogging logMessagesAtTransportLevel="true"/>
</diagnostics>
Answer: D
Microsoft 070-521-Csharp 070-521-Csharp 070-521-Csharp pdf
NO.5 You are moving a Windows Communication Foundation (WCF) service into production.
You need to be able to monitor the health of the service. You only want to enable all performance counter
instances exposed by the ServiceModelService 4.0.0.0 counter group.
Which element should you add to the system.serviceModel section in the application configuration file?
A. <diagnostics performanceCounters="ServiceOnly" />
B. <diagnostics wmiProviderEnabled="true" performanceCounters="Off" />
C. <diagnostics performanceCounters="All" />
D. <diagnostics wmiProviderEnabled="true" />
Answer: A
Microsoft 070-521-Csharp덤프 070-521-Csharp
NO.6 You are creating a Windows Communication Foundation (WCF) service. You do not want to expose the
internal implementation at the service layer.
You need to expose the following class as a service named Arithmetic with an operation named Sum.
public class Calculator
{
public int Add(int x, int y)
{
}
}
Which code segment should you use?
A. [ServiceContract(Namespace="Arithmetic")]
public class Calculator
{
[OperationContract(Action="Sum")]
public int Add(int x, int y)
{
}
}
B. [ServiceContract(ConfigurationName="Arithmetic")]
public class Calculator
{
[OperationContract(Action="Sum")]
public int Add(int x, int y)
{
}
}
C. [ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(Name="Sum")]
public int Add(int x, int y)
{
}
}
D. [ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(ReplyAction="Sum")]
public int Add(int x, int y)
{
}
}
Answer: C
Microsoft최신덤프 070-521-Csharp 070-521-Csharp dump
NO.7 You are creating a Windows Communication Foundation (WCF) service based on WSHttpBinding.
New audit requirements dictate that callers must be authenticated on every call to ensure that their
credentials have not been revoked.
You need to ensure that the service will not cache the security request token.
What should you do?
A. Apply a ServiceBehavior attribute to the service implementation class with the InstanceContextMode
property set to Single.
B. In the message security configuration, change clientCredentialType from IssuedToken to UserName.
C. In the message security configuration, set establishSecurityContext to false.
D. At the end of every operation, call the SessionStateUtility.RaiseSessionEnd method.
Answer: C
Microsoft기출문제 070-521-Csharp 070-521-Csharp인증 070-521-Csharp
NO.8 You are creating a Windows Communication Foundation (WCF) service to process orders. The data
contract for the order is defined as follows.
[DataContract]
public class Order
{
[DataMember]
public string CardHolderName { get; set; }
[DataMember]
public string CreditCardNumber { get; set; }
}
You have the following requirements:
Enable the transmission of the contents of Order from the clients to the service.
Ensure that the contents of CreditCardNumber are not sent across the network in clear text.
Ensure that the contents of CreditCardNumber are accessible by the service to process the order.
You need to implement the service to meet these requirements.
What should you do?
A. Add a DataProtectionPermission attribute to the CreditCardNumber property and set the ProtectData
property to true.
B. Convert the DataContract to a MessageContract and set the ProtectionLevel property to
EncryptAndSign.
C. Change the data type of CreditCardNumber from string to SecureString.
D. Implement the CreditCardNumber property getter and setter. In the setter, run the value of the
CreditCardNumber through the MD5CryptoServiceProvider class TransformBlock method.
Answer: B
Microsoft 070-521-Csharp 070-521-Csharp 070-521-Csharp최신덤프
NO.9 A Windows Communication Foundation (WCF) application uses a data contract that has several data
members.
You need the application to throw a SerializationException if any of the data members are not present
when a serialized instance of the data contract is deserialized.
What should you do?
A. Add the KnownType attribute to the data contract. Set a default value in each of the data member
declarations.
B. Add the KnownType attribute to the data contract. Set the Order property of each data member to
unique integer value.
C. Set the EmitDefaultValue property of each data member to false.
D. Set the IsRequired property of each data member to true.
Answer: D
Microsoft 070-521-Csharp 070-521-Csharp dump 070-521-Csharp시험문제
NO.10 You are developing an application to update a user ¯ s soc i a l s t a t us . You need t o consu m e t he se r v i ce
using Windows Communication Foundation (WCF).
The client configuration is as follows.
<system.serviceModel>
<bindings>
<webHttpBinding>
<binding name="SocialConfig">
<security mode="TransportCredentialOnly">
<transport clientCredentialType="Basic"
?realm="Social API" />
</security>
</binding>
</webHttpBinding>
</bindings>
<client>
<endpoint address="http://contoso.com"
binding="webHttpBinding"
bindingConfiguration="SocialConfig"
contract="ISocialStatus"
name="SocialClient" />
</client>
</system.serviceModel>
The service contract is defined as follows.
[ServiceContract]
public interface ISocialStatus
{
[OperationContract]
[WebInvoke(UriTemplate =
"/statuses/update.xml?status={text}")]
void UpdateStatus(string text);
}
Which code segment should you use to update the social status?
A. using (WebChannelFactory<ISocialStatus> factory =
new WebChannelFactory<ISocialStatus>("SocialClient"))
{
factory.Credentials.UserName.UserName = user.Name;
factory.Credentials.UserName.Password = user.Password;
ISocialStatus socialChannel = factory.CreateChannel();
socialChannel.UpdateStatus(newStatus);
}
B. using (ChannelFactory<ISocialStatus> factory =
new WebChannelFactory<ISocialStatus>(typeof(ISocialStatus)))
{
factory.Credentials.UserName.UserName = user.Name;
factory.Credentials.UserName.Password = user.Password;
ISocialStatus socialChannel = factory.CreateChannel();
socialChannel.UpdateStatus(newStatus);
}
C. using (ChannelFactory<ISocialStatus> factory =
new ChannelFactory<ISocialStatus>("POST"))
{
factory.Credentials.Windows.ClientCredential.UserName =
user.Name;
factory.Credentials.Windows.ClientCredential.SecurePassword.
SetAt(0, Convert.ToChar(user.Password));
ISocialStatus socialChannel = factory.CreateChannel();
socialChannel.UpdateStatus(newStatus);
}
D. using (WebChannelFactory<ISocialStatus> factory =
new WebChannelFactory<ISocialStatus>(typeof(ISocialClient)))
{
factory.Credentials.Windows.ClientCredential.UserName =
user.Name;
factory.Credentials.Windows.ClientCredential.SecurePassword.
SetAt(0, Convert.ToChar(user.Password));
ISocialStatus socialChannel = factory.CreateChannel();
socialChannel.UpdateStatus(newStatus);
}
Answer: A
Microsoft pdf 070-521-Csharp 070-521-Csharp최신덤프
NO.11 A Windows Communication Foundation (WCF) service has the following contract.
[ServiceContract(Namespace="http://contoso.com")]
public interface IShipping
{
[OperationContract]
string DoWork(int id);
}
This is one of several service contracts hosted by your application. All endpoints use SOAP 1.2 bindings
with WS-Addressing 1.0. The System.ServiceModel.MessageLogging trace source in the
system.diagnostics configuration section is configured with one listener.
You need to make sure that only the messages that are returned from the DoWork operation are logged.
Which XML segment should you add to the system.serviceModel/diagnostics/messageLogging/filters
configuration element?
A. <add xmlns:addr="http://www.w3.org/2005/08/addressing">
//addr:Action[text() =
'http://contoso.com/IShipping/DoWorkResponse']
</add>
B. <add xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
//soap:Action[text() =
'http://contoso.com/IShipping/DoWorkResponse']
</add>
C. <add xmlns:addr="http://www.w3.org/2005/08/addressing">
//addr:Action[text() =
'http://contoso.com/IShipping/DoWork']
</add>
D. <add xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
//soap:Action[text() =
'http://contoso.com/IShipping/DoWork']
</add>
Answer: A
Microsoft 070-521-Csharp시험문제 070-521-Csharp인증 070-521-Csharp
NO.12 You are creating a Windows Communication Foundation (WCF) service that is implemented as follows.
(Line numbers are included for reference only.)
01 [ServiceContract]
02 [ServiceBehavior(IncludeExceptionDetailsInFaults = true)]
03 public class OrderService
04 {
05 [OperationContract]
06 public void SubmitOrder(Order anOrder)
07 {
08 try
09 {
10
11 }
12 catch(DivideByZeroException ex)
13 {
14
15 }
16 }
17 }
You need to ensure that the stack trace details of the exception are not included in the error information
sent to the client.
What should you do?
A. Replace line 14 with the following line.
throw;
B. Replace line 14 with the following line.
throw new FaultException<Order>(anOrder, ex.ToString());
C. After line 05, add the following line.
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line.
throw ex;
D. After line 05, add the following line.
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line.
throw new FaultException<Order>(anOrder, "Divide by zero exception");
Answer: D
Microsoft자료 070-521-Csharp 070-521-Csharp자격증 070-521-Csharp dump 070-521-Csharp
NO.13 A Windows Communication Foundation (WCF) service is responsible for transmitting XML documents
between systems. The service has the following requirements:
It must minimize the transmission size by attaching the XML document as is without using escape
characters or base64 encoding.
It must interoperate with systems that use SOAP but are not built on the .NET platform.
You need to configure the service to support these requirements.
Which message encoding should you use?
A. Binary message encoding
B. MTOM (Message Transmission Optimization Mechanism) message encoding
C. Text message encoding with message version set to none
D. Text message encoding with message version set to SOAP 1.2
Answer: B
Microsoft시험문제 070-521-Csharp자격증 070-521-Csharp자료
NO.14 </behaviors>
...
You need to configure the service to publish the service metadata.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following XML segment between lines 10 and 11.
<endpoint?address=""
binding="mexHttpBinding"
contract="IMetadataExchange"
/>
B. Add the following XML segment between lines 10 and 11.
<endpoint?address=""
binding="basicHttpBinding"
contract="IMetadataExchange"
/>
C. Add the following XML segment between lines15 and 16.
<serviceDiscovery>
<announcementEndpoints>
<endpoint address=""/>
</announcementEndpoints>
</serviceDiscovery>
D. Add the following XML segment between lines 15 and 16
<serviceMetadata httpGetEnabled="true"/>
Answer: AD
Microsoft인증 070-521-Csharp 070-521-Csharp기출문제 070-521-Csharp인증 070-521-Csharp 070-521-Csharp
17. Four Windows Communication Foundation (WCF) services are hosted in Microsoft Internet
Information Services (IIS). No behavior configuration exists in the web.config file.
You need to configure the application so that every service and endpoint limits the number of concurrent
calls to 50 and the number of concurrent sessions to 25.
Which XML segment should you add to the system.serviceModel configuration section of the web.config
file?
A. <behaviors>
<serviceBehaviors>
<behavior name="*">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
B. <behaviors>
<serviceBehaviors>
<behavior name="default">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
C. <behaviors>
<serviceBehaviors>
<behavior name="">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
D. <behaviors>
<serviceBehaviors>
<behavior name="ALL">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
Answer: C
Microsoft덤프 070-521-Csharp 070-521-Csharp 070-521-Csharp
18. The endpoint of a Windows Communication Foundation (WCF) service uses basicHttpBinding for its
binding. Your company's policies have changed to require that messages not be sent in clear text.
You must ensure that all messages are encrypted when traveling across the network.
What should you do?
A. Set the ProtectionLevel property on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
B. Set the ProtectionLevel property on the service contract and update the bindingConfiguration attribute
in the endpoint element of the configuration file to webHttpBinding.
C. Set the PrincipalPermissionAttribute on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
D. Set the PrincipalPermissionAttribute on the service contract and update the bindingConfiguration
attribute in the endpoint element of the configuration file to wsHttpBinding.
Answer: A
Microsoft최신덤프 070-521-Csharp인증 070-521-Csharp덤프 070-521-Csharp
NO.15 </serviceBehaviors>
NO.16 You are consuming a Windows Communication Foundation (WCF) service in an ASP.NET Web
application. The service interface is defined as follows.
[ServiceContract]
public interface ICatalog
{
[OperationContract]
[WebGet(UriTemplate = "/Catalog/Items/{id}",
ResponseFormat = WebMessageFormat.Json)]
string RetrieveItemDescription(int id);
}
The service is hosted at /Catalog.svc.
You need to call the service using jQuery to retrieve the description of an item as indicated by a variable
named itemId.
Which code segment should you use?
A. $.get(String.format("/Catalog.svc/Catalog/Items/?id={0}", itemId)
null,
function (data) {
},
"javascript");
B. $.get(String.format("/Catalog.svc/Catalog/Items/{0}", itemId),
null,
function (data) {
},
"json");
C. $.get(String.format("/Catalog.svc/Catalog/Items/{0}", itemId),
null,
function (data) {
},
"xml");
D. $.get(String.format("/Catalog.svc/Catalog/Items/id={0}", itemId),
null,
function (data) {
},
"json");
Answer: B
Microsoft dumps 070-521-Csharp 070-521-Csharp 070-521-Csharp자격증 070-521-Csharp 070-521-Csharp
NO.17 A WCF service code is implemented as follows. (Line numbers are included for reference only.)
01 [ServiceContract]
02 [ServiceBehavior(InstanceContextMode =
03 InstanceContextMode.Single)]
04 public class CalculatorService
05 {
06 [OperationContract]
07 public double Calculate(double op1, string op, double op2)
08 {
24 }
25 }
You need to decrease the response time of the service.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution.
Choose two.)
A. Change the service behavior to the following.
[ServiceBehavior(
InstanceContextMode = InstanceContextMode.Single,
ConcurrencyMode = ConcurrencyMode.Multiple)]
B. Change the service behavior to the following.
[ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)]
C. Require the clients use threads, the Parallel Task Library, or other mechanism to issue service calls in
parallel.
D. Require the clients to use async operations when calling the service.
Answer: AB
Microsoft자료 070-521-Csharp최신덤프 070-521-Csharp 070-521-Csharp 070-521-Csharp
NO.18 You are creating a Windows Communication Foundation (WCF) service that implements operations in
a RESTful manner. You need to add a delete operation.
You implement the delete method as follows.
void DeleteItems(string id);
You need to configure WCF to call this method when the client calls the service with the HTTP DELETE
operation.
What should you do?
A. Add the WebInvoke(UriTemplate = "/Items/{id}", Method="DELETE") attribute to the operation.
B. Add the HttpDelete attribute to the operation.
C. Replace the string parameter with a RemovedActivityAction parameter.
D. Replace the return type with RemovedActivityAction.
Answer: A
Microsoft자료 070-521-Csharp 070-521-Csharp자격증 070-521-Csharp 070-521-Csharp dump
NO.19 A Windows Communication Foundation (WCF) service has a callback contract. You are developing a
client application that will call this service.
You must ensure that the client application can interact with the WCF service.
What should you do?
A. On the OperationContractAttribute, set the AsyncPattern property value to true.
B. On the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the
client.
C. On the client, create a proxy derived from DuplexClientBase<TChannel>.
D. On the client, use GetCallbackChannel<T>.
Answer: C
Microsoft시험문제 070-521-Csharp시험문제 070-521-Csharp dump 070-521-Csharp자료 070-521-Csharp자격증
NO.20 You are adding a Windows Communication Foundation (WCF) service to an existing application. The
application is configured as follows. (Line numbers are included for reference only.)
01?<configuration>
02 <system.serviceModel>
03 <services>
04 <service name="Contoso.Sales.StockService"
05 behaviorConfiguration="MetadataBehavior">
06 <host>
07 <baseAddresses>
08 <add
baseAddress="http://contoso.com:8080/StockService" />
09 </baseAddresses>
10 </host>
11 </service>
12 </services>
13 <behaviors>
14 <serviceBehaviors>
15 <behavior name="MetadataBehavior">
16 </behavior>
ITexamdump의 74-343덤프의 VCE테스트프로그램과 CAT-500덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-501시험에 대비한 고품질 덤프와 70-480시험 최신버전덤프를 제공해드립니다. 최고품질 NS0-155시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기