ITExamDump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는Microsoft 70-516시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ITExamDump에서는 무료로 24시간 온라인상담이 있으며, ITExamDump의 덤프로Microsoft 70-516시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.
최근 Microsoft인증 70-516시험이 IT업계에서 제일 높은 인지도를 가지고 있습니다.바라만 보지 마시고Microsoft인증 70-516시험에 도전해보세요. ITExamDump 의 Microsoft인증 70-516덤프로 시험준비공부를 하시면 한방에 시험패스 가능합니다. Microsoft인증 70-516덤프로 자격증취득에 가까워지고 나아가서는 IT업계에서 인정을 받는 열쇠를 소유한것과 같다고 할수 있습니다.
만약ITExamDump를 선택하였다면 여러분은 반은 성공한 것입니다. 여러분은 아주 빠르게 안전하게 또 쉽게Microsoft 70-516인증시험 자격증을 취득하실 수 있습니다. 우리ITExamDump에서 제공되는 모든 덤프들은 모두 100%보장 도를 자랑하며 그리고 우리는 일년무료 업데이트를 제공합니다.
시험 번호/코드: 70-516
시험 이름: Microsoft (TS: Accessing Data with Microsoft .NET Framework 4)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 196 문항
업데이트: 2014-02-27
만약 여러분은Microsoft 70-516인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만Microsoft 70-516패스는 쉬운 일은 아닙니다.Microsoft 70-516패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
ITExamDump의 연구팀에서는Microsoft 70-516인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드Microsoft 70-516덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에Microsoft 70-516이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이Microsoft 70-516시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.
Microsoft인증 70-516시험은 등록하였는데 시험준비는 아직이라구요? Microsoft인증 70-516시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의Microsoft인증 70-516덤프와의 근사한 만남이Microsoft인증 70-516패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의Microsoft인증 70-516덤프로 시험패스에 고고싱하세요.
70-516 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-516.html
NO.1 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
You use the ADO.NET Entity Framework to model entities. You write the following code segment. (Line
numbers are included for reference only.)
01 AdventureWorksEntities context = new
AdventureWorksEntities("http://localhost:1234/AdventureWorks.svc");
02 ...
03 var q = from c in context.Customers
04 where c.City == "London"
05 orderby c.CompanyName
06 select c;
You need to ensure that the application meets the following requirements:
Compares the current values of unmodified properties with values returned from the data source.
Marks the property as modified when the properties are not the same.
Which code segment should you insert at line 02?
A. context.MergeOption = MergeOption.AppendOnly;
B. context.MergeOption = MergeOption.PreserveChanges;
C. context.MergeOption = MergeOption.OverwriteChanges;
D. context.MergeOption = MergeOption.NoTracking;
Answer: B
Microsoft 70-516덤프 70-516 dumps 70-516덤프
NO.2 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application uses the ADO.NET Entity Framework to manage Plain Old CLR Objects (POCO) entities.
You create a new POCO class. You need to ensure that the class meets the following requirements:
It can be used by an ObjectContext.
It is enabled for change-tracking proxies.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Modify each mapped property to contain sealed and protected accessors.
B. Modify each mapped property to contain non-sealed, public, and virtual accessors.
C. Configure the navigation property to return a type that implements the ICollection interface.
D. Configure the navigation property to return a type that implements the IQueryable interface.
E. Configure the navigation property to return a type that implements the IEntityWithRelationships
interface.
Answer: BC
Microsoft dump 70-516 70-516
NO.3 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database.
The application has two DataTable objects that reference the Customers and Orders tables in the
database.
The application contains the following code segment. (Line numbers are included for reference only.)
01 DataSet customerOrders = new DataSet();
02 customerOrders.EnforceConstraints = true;
03 ForeignKeyConstraint ordersFK = new ForeignKeyConstraint("ordersFK",
04
customerOrders.Tables["Customers"].Columns["CustomerID"],
05 customerOrders.Tables["Orders"].Columns["CustomerID"]);
06 ...
07 customerOrders.Tables["Orders"].Constraints.Add(ordersFK);
You need to ensure that an exception is thrown when you attempt to delete Customer records that have
related Order records.
Which code segment should you insert at line 06?
A. ordersFK.DeleteRule = Rule.SetDefault;
B. ordersFK.DeleteRule = Rule.None;
C. ordersFK.DeleteRule = Rule.SetNull;
D. ordersFK.DeleteRule = Rule.Cascade;
Answer: B
Microsoft최신덤프 70-516 70-516 70-516 70-516 70-516 pdf
NO.4 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database and contains a LINQ to SQL data model.
The data model contains a function named createCustomer that calls a stored procedure.
The stored procedure is also named createCustomer. The createCustomer function has the following
signature.
createCustomer (Guid customerID, String customerName, String address1)
The application contains the following code segment. (Line numbers are included for reference only.)
01 CustomDataContext context = new CustomDataContext();
02 Guid userID = Guid.NewGuid();
03 String address1 = "1 Main Steet";
04 String name = "Marc";
05 ...
You need to use the createCustomer stored procedure to add a customer to the database.
Which code segment should you insert at line 05?
A. context.createCustomer(userID, customer1, address1);
B. context.ExecuteCommand("createCustomer", userID, customer1, address1);
Customer customer = new Customer() { ID = userID, Address1 = address1, Name = customer1, };
C. context.ExecuteCommand("createCustomer", customer);
Customer customer = new Customer() { ID = userID, Address1 = address1, Name = customer1, };
D. context.ExecuteQuery(typeof(Customer), "createCustomer", customer);
Answer: A
Microsoft 70-516인증 70-516시험문제 70-516
NO.5 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
You use the ADO.NET Entity Framework to model entities. You write the following code segment. (Line
numbers are included for reference only.)
01 public partial class SalesOrderDetail : EntityObject
02 {
03 partial void OnOrderQtyChanging(short value)
04 {
05 ...
06 {
07 ...
08 }
09 }
10 }
You need to find out whether the object has a valid ObjectStateEntry instance. Which code segment
should you insert at line 05?
A. if (this.EntityState != EntityState.Detached)
B. if (this.EntityState != EntityState.Unchanged)
C. if (this.EntityState != EntityState.Modified)
D. if (this.EntityState != EntityState.Added)
Answer: D
Microsoft 70-516 dump 70-516
NO.6 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server 2008 database. The database includes a table
named dbo.Documents
that contains a column with large binary data. You are creating the Data Access Layer (DAL).
You add the following code segment to query the dbo.Documents table. (Line numbers are included for
reference only.)
01 public void LoadDocuments(DbConnection cnx)
02 {
03 var cmd = cnx.CreateCommand();
04 cmd.CommandText = "SELECT * FROM dbo.Documents";
05 ...
06 cnx.Open();
07 ...
08 ReadDocument(reader);
09 }
You need to ensure that data can be read as a stream. Which code segment should you insert at line 07?
A. var reader = cmd.ExecuteReader(CommandBehavior.Default);
B. var reader = cmd.ExecuteReader(CommandBehavior.SchemaOnly);
C. var reader = cmd.ExecuteReader(CommandBehavior.KeyInfo);
D. var reader = cmd.ExecuteReader(CommandBehavior.SequentialAccess);
Answer: D
Microsoft최신덤프 70-516기출문제 70-516자격증 70-516 dump
NO.7 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server 2008 database.
You use the ADO.NET Entity Framework to model your entities. You use ADO.NET self-tracking entities.
You need to ensure that the change-tracking information for the self-tracking entities can be used to
update the database.
Which ObjectContext method should you call after changes are made to the entities?
A. Attach
B. Refresh
C. SaveChanges
D. ApplyChanges
Answer: D
Microsoft 70-516 70-516
NO.8 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database.
The application uses a DataTable named OrderDetailTable that has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
Some records contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 DataColumn column = new DataColumn("UnitPrice", typeof(double));
02 ...
03 OrderDetailTable.Columns.Add(column);
You need to add a calculated DataColumn named UnitPrice to the OrderDetailTable object.
You also need to ensure that UnitPrice is set to 0 when it cannot be calculated.
Which code segment should you insert at line 02?
A. column.Expression = "LineTotal/Quantity";
B. column.Expression = "LineTotal/ISNULL(Quantity, 1)";
C. column.Expression = "if(Quantity > 0, LineTotal/Quantity, 0)";
D. column.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)";
Answer: D
Microsoft 70-516 70-516 70-516
NO.9 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create a Windows Forms
application.
You plan to deploy the application to several shared client computers. You write the following code
segment.
(Line numbers are included for reference only.)
01 Configuration config = ConfigurationManager.OpenExeConfiguration(exeConfigName);
02 ...
03 config.Save();
04 ...
You need to encrypt the connection string stored in the .config file.
Which code segment should you insert at line 02.?
A. ConnectionStringsSection section = config.GetSection("connectionString") as
ConnectionStringsSection;
section.SectionInformation.ProtectSection("DataProtectionConfigurationProvider");
B. ConnectionStringsSection section = config.GetSection("connectionStrings") as
ConnectionStringsSection;
section.SectionInformation.ProtectSection("DataProtectionConfigurationProvider");
C. ConnectionStringsSection section = config.GetSection("connectionString") as
ConnectionStringsSection;
section.SectionInformation.ProtectSection("RsaProtectedConfigurationProvider");
D. ConnectionStringsSection section = config.GetSection("connectionStrings") as
ConnectionStringsSection;
section.SectionInformation.ProtectSection("RsaProtectedConfigurationProvider");
Answer: D
Microsoft 70-516기출문제 70-516 70-516
NO.10 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database.
You use the ADO.NET Entity Framework to manage persistence-ignorant entities. You create an
ObjectContext instance named context.
Then, you directly modify properties on several entities. You need to save the modified entity values to the
database.
Which code segment should you use?
A. context.SaveChanges(SaveOptions.AcceptAllChangesAfterSave);
B. context.SaveChanges(SaveOptions.DetectChangesBeforeSave);
C. context.SaveChanges(SaveOptions.None);
D. context.SaveChanges();
Answer: B
Microsoft시험문제 70-516덤프 70-516덤프 70-516 70-516 dumps
NO.11 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create a Windows
Communication Foundation (WCF) Data Services service.
The service connects to a Microsoft SQL Server 2008 database. The service is hosted by an Internet
Information Services (IIS) 6.0 Web server.
The application works correctly in the development environment. However, when you connect to the
service on
the production server, attempting to update or delete an entity results in an error.
You need to ensure that you can update and delete entities on the production server. What should you
do?
A. Add the following line of code to the InitializeService method of the service:
config.SetEntitySetAccessRule ("*", EntitySetRights.WriteDelete | EntitySetRights.WriteInsert);
B. Add the following line of code to the InitializeService method of the service:
config.SetEntitySetAccessRule ("*", EntitySetRights.WriteDelete | EntitySetRights.WriteMerge);
C. Configure IIS to allow the PUT and DELETE verbs for the .svc Application Extension.
D. Configure IIS to allow the POST and DELETE verbs for the .svc Application Extension.
Answer: C
Microsoft 70-516 dumps 70-516 70-516
NO.12 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database. The application uses the ADO.NET Entity
Framework to model entities.
The database includes objects based on the exhibit.
The application includes the following code segment. (Line numbers are included for reference only.)
01 using (AdventureWorksEntities context = new AdventureWorksEntities()){
02 ...
03 foreach (SalesOrderHeader order in customer.SalesOrderHeader){
04 Console.WriteLine(String.Format("Order: {0} ", order.SalesOrderNumber));
05 foreach (SalesOrderDetail item in order.SalesOrderDetail){
06 Console.WriteLine(String.Format("Quantity: {0} ", item.Quantity));
07 Console.WriteLine(String.Format("Product: {0} ", item.Product.Name));
08 }
09 }
10 }
You want to list all the orders for a specified customer. You need to ensure that the list contains the
following fields:
Order number
Quantity of products
Product name
Which code segment should you insert at line 02?
A. Contact customer = context.Contact.Where("it.ContactID = @customerId", new
ObjectParameter("@customerId", customerId)).First();
B. Contact customer = context.Contact.Where("it.ContactID = @customerId", new
ObjectParameter("customerId", customerId)).First();
C. context.ContextOptions.LazyLoadingEnabled = true;
Contact customer = (from contact in context.Contact
include("SalesOrderHeader.SalesOrderDetail")
select conatct).FirstOrDefault();
D. Contact customer = (from contact in context.Contact
include("SalesOrderHeader")
select conatct).FirstOrDefault();
Answer: B
Microsoft 70-516 70-516 70-516 70-516 pdf
NO.13 }
You need to ensure that the Product data for each Category object is lazy-loaded. What should you do?
A. Add the following code segment at line 06:
ctx.LoadProperty(category, "Products");
B. Add the following code segment at line 08:
ctx.LoadProperty(product, "*");
C. Add the following code segment at line 06:
var strPrdUri = string.Format("Categories({0})?$expand=Products", category.CategoryID);
var productUri = new Uri(strPrdUri, UriKind.Relative);
ctx.Execute<Product>(productUri);
D. Add the following code segment at line 08:
var strprdUri= string.format("Products?$filter=CategoryID eq {0}", category.CategoryID);
var prodcutUri = new Uri(strPrd, UriKind.Relative);
ctx.Execute<Product>(productUri);
Answer: A
Microsoft dump 70-516 70-516최신덤프 70-516최신덤프
11.You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database. You load records from the Customers table
into a DataSet object named dataset.
You need to retrieve the value of the City field from the first and last records in the Customers table.
Which code segment should you use?
A. DataTable dt = dataset.Tables["Customers"];
string first = dt.Rows[0]["City"].ToString();
string last = dt.Rows[dt.Rows.Count - 1]["City"].ToString();
B. DataTable dt = dataset.Tables["Customers"];
string first = dt.Rows[0]["City"].ToString();
string last = dt.Rows[dt.Rows.Count]["City"].ToString();
C. DataRelation relationFirst = dataset.Relations[0];
DataRelation relationLast = dataset.Relations[dataset.Relations.Count - 1];
string first = relationFirst.childTable.Columns["City"].ToString();
string last = relationLast.childTable.Columns["City"].ToString();
D. DataRelation relationFirst = dataset.Relations[0];
DataRelation relationLast = dataset.Relations[dataset.Relations.Count];
string first = relationFirst.childTable.Columns["City"].ToString();
string last = relationLast.childTable.Columns["City"].ToString();
Answer: A
Microsoft자료 70-516 70-516 70-516
NO.14 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create a Windows
Communication
Foundation (WCF) Data Services service. You deploy the data service to the following URL:
http://contoso.com/Northwind.svc.
You add the following code segment. (Line numbers are included for reference only.)
01 var uri = new Uri(@"http://contoso.com/Northwind.svc/");
02 var ctx = new NorthwindEntities(uri);
03 var categories = from c in ctx.Categories select c;
04 foreach (var category in categories) {
05 PrintCategory(category);
06 ...
07 foreach (var product in category.Products) {
08 ...
09 PrintProduct(product);
10 }
NO.15 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database.
The application uses the ADO.NET LINQ to SQL model to retrieve data from the database.
The application will not modify retrieved data. You need to ensure that all the requested data is retrieved.
You want to achieve this goal using the minimum amount of resources. What should you do?
A. Set ObjectTrackingEnabled to true on the DataContext class.
B. Set ObjectTrackingEnabled to false on the DataContext class.
C. Set DeferredLoadingEnabled to true on the DataContext class.
D. Set DeferredLoadingEnabled to false on the DataContext class.
Answer: B
Microsoft dump 70-516자료 70-516인증 70-516덤프 70-516덤프
NO.16 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database. You create a DataSet object in the
application.
You add two DataTable objects named App_Products and App_Categories to the DataSet.
You add the following code segment to populate the DataSet object.
(Line numbers are included for reference only.)
01 public void Fill(SqlConnection cnx, DataSet ds)
02 {
03 var cmd = cnx.CreateCommand();
04 cmd.CommandText = "SELECT * FROM dbo.Products; " + "SELECT * FROM dbo.Categories";
05 var adapter = new SqlDataAdapter(cmd);
06 ...
07 }
You need to ensure that App_Products and App_Categories are populated from the dbo.Products and
dbo.Categories database tables.
Which code segment should you insert at line 06?
A. adapter.Fill(ds, "Products");
adapter.Fill(ds, "Categories");
B. adapter.Fill(ds.Tables["App_Products"]);
adapter.Fill(ds.Tables["App_Categories"]);
C. adapter.TableMappings.Add("Table", "App_Products");
adapter.TableMappings.Add("Table1", "App_Categories");
adapter.Fill(ds);
D. adapter.TableMappings.Add("Products", "App_Products");
adapter.TableMappings.Add("Categories", "App_Categories");
adapter.Fill(ds);
Answer: D
Microsoft dump 70-516 70-516시험문제 70-516자격증
NO.17 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
You use the ADO.NET Entity Data Model (EDM) to define a Customer entity.
You need to add a new Customer to the data store without setting all the customer's properties. What
should you do?
A. Call the Create method of the Customer object.
B. Call the CreateObject method of the Customer object.
C. Override the Create method for the Customer object.
D. Override the SaveChanges method for the Customer object.
Answer: B
Microsoft 70-516인증 70-516 dumps 70-516최신덤프
NO.18 You use Microsoft Visual Studio 2010, Microsoft Sync Framework, and Microsoft .NET Framework 4.0
to create an application.
You have a ServerSyncProvider connected to a Microsoft SQL Server database. The database is hosted
on a Web server.
Users will use the Internet to access the Customer database through the ServerSyncProvider.
You write the following code segment. (Line numbers are included for reference only.)
01 SyncTable customerSyncTable = new SyncTable("Customer");
02 customerSyncTable.CreationOption = TableCreationOption.UploadExistingOrCreateNewTable;
03 ...
04 customerSyncTable.SyncGroup = customerSyncGroup;
05 this.Configuration.SyncTables.Add(customerSyncTable);
You need to ensure that the application meets the following requirements:
Users can modify data locally and receive changes from the server.
Only changed rows are transferred during synchronization.
Which code segment should you insert at line 03?
A. customerSyncTable.SyncDirection = SyncDirection.DownloadOnly;
B. customerSyncTable.SyncDirection = SyncDirection.Snapshot;
C. customerSyncTable.SyncDirection = SyncDirection.Bidirectional;
D. customerSyncTable.SyncDirection = SyncDirection.UploadOnly;
Answer: C
Microsoft 70-516 70-516 pdf 70-516 70-516
NO.19 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application uses the ADO.NET Entity Framework to model entities.
The application allows users to make changes while disconnected from the data store.
Changes are submitted to the data store by using the SubmitChanges method of the DataContext object.
You receive an exception when you call the SubmitChanges method to submit entities that a user has
changed in offline mode.
You need to ensure that entities changed in offline mode can be successfully updated in the data store.
What should you do?
A. Set the ObjectTrackingEnabled property of DataContext to true.
B. Set the DeferredLoadingEnabled property of DataContext to true.
C. Call the SaveChanges method of DataContext with a value of false.
D. Call the SubmitChanges method of DataContext with a value of
System.Data.Linq.ConflictMode.ContinueOnConflict.
Answer: A
Microsoft시험문제 70-516 70-516
NO.20 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application uses the ADO.NET Entity Framework to model entities.
You define a Category class by writing the following code segment. (Line numbers are included for
reference only.)
01 public class Category
02 {
03 public int CategoryID { get; set; }
04 public string CategoryName { get; set; }
05 public string Description { get; set; }
06 public byte[] Picture { get; set; }
07 ...
08 }
You need to add a collection named Products to the Category class. You also need to ensure that the
collection supports deferred loading.
Which code segment should you insert at line 07?
A. public static List <Product> Products { get; set; }
B. public virtual List <Product> Products { get; set; }
C. public abstract List <Product> Products { get; set; }
D. protected List <Product> Products { get; set; }
Answer: B
Microsoft 70-516 pdf 70-516
ITexamdump의 646-048덤프의 VCE테스트프로그램과 C_FSUTIL_60덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-663시험에 대비한 고품질 덤프와 70-492시험 최신버전덤프를 제공해드립니다. 최고품질 DC0-260시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기