IT인증자격증은 국제적으로 승인받는 자격증이기에 많이 취득해두시면 취업이나 승진이나 이직이나 모두 편해집니다. 다른 사람이 없는 자격증을 내가 가지고 있다는것은 실력을 증명해주는 수단입니다. Symantec인증 ST0-050시험은 널리 승인받는 자격증의 시험과목입니다. Symantec인증 ST0-050덤프로Symantec인증 ST0-050시험공부를 하시면 시험패스 난이도가 낮아지고 자격증 취득율이 높이 올라갑니다.자격증을 많이 취득하여 취업이나 승진의 문을 두드려 보시면 빈틈없이 닫힌 문도 활짝 열릴것입니다.
어떻게Symantec인증ST0-050시험을 패스하느냐 에는 여러 가지 방법이 있습니다. 하지만 여러분의 선택에 따라 보장도 또한 틀립니다. 우리ITExamDump 에서는 아주 완벽한 학습가이드를 제공하며,Symantec인증ST0-050시험은 아주 간편하게 패스하실 수 있습니다. ITExamDump에서 제공되는 문제와 답은 모두 실제Symantec인증ST0-050시험에서나 오는 문제들입니다. 일종의 기출문제입니다.때문에 우리ITExamDump덤프의 보장 도와 정확도는 안심하셔도 좋습니다.무조건Symantec인증ST0-050시험을 통과하게 만듭니다.우리ITExamDump또한 끈임 없는 덤프갱신으로 페펙트한Symantec인증ST0-050시험자료를 여러분들한테 선사하겠습니다.
Symantec ST0-050인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이Symantec ST0-050인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 여러분은 응시 전 저희의 문제와 답만 잘 장악한다면 빠른 시일 내에 많은 성과 가 있을 것입니다.
모두 아시다시피Symantec ST0-050인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.Symantec ST0-050인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.
시험 번호/코드: ST0-050
시험 이름: Symantec (Symantec Network Access Control 11 (STS))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 100 문항
업데이트: 2013-12-12
ST0-050 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-050.html
NO.1 How should the logical condition of an IF/THEN/ENDIF statement be reversed?
A. add an AND statement
B. enable the Reverse Logic Processing Engine for the requirement
C. use the Transform function of the extended scripting commands
D. toggle the NOT function on the IF portion of the statement
Answer: D
Symantec ST0-050덤프 ST0-050
NO.2 How many network interface(s) need to be configured for a Gateway Enforcer appliance?
A. 1
B. 2
C. 3
D. 4
Answer: B
Symantec ST0-050최신덤프 ST0-050 ST0-050인증
NO.3 Which three types of data can be used with LAN Enforcers for the authentication sequence? (Choose
three.)
A. machine GUID
B. Policy ID
C. Host Integrity state
D. location awareness settings
E. user group
Answer: ACD
Symantec ST0-050 ST0-050 ST0-050 ST0-050인증
*
NO.4 Which check can be performed using custom requirements to verify whether a product is running on a
client machine?
A. check that the service is running in the services snap-in
B. check that the service is running
C. check that the service has been stopped
D. check that the service has been registered
Answer: B
Symantec인증 ST0-050 dump ST0-050
NO.5 Which two event details are included in a standard Host Integrity log file? (Choose two.)
A. client Host Integrity status
B. name and state of each requirement
C. error messages
D. checked parameter
E. http 200 ok
Answer: AC
Symantec ST0-050 ST0-050 ST0-050 ST0-050
NO.6 What is the first step to troubleshoot a custom requirement in a Host Integrity policy?
A. run the Host Integrity check several times
B. carefully examine the logic structure of the conditions
C. examine the Security Compliance Summary reports
D. check the properties of the endpoint from the Clients page
Answer: B
Symantec ST0-050기출문제 ST0-050 ST0-050 dumps
NO.7 Which two default user accounts are created on an Enforcer? (Choose two.)
A. administrator
B. admin
C. root
D. user
E. guest
Answer: AC
Symantec덤프 ST0-050시험문제 ST0-050기출문제
NO.8 Which check can be performed using custom requirements to verify whether an antivirus product is
up-to-date on a client machine?
A. check the date of the associated signature data file(s) on the client
B. check the date of the associated signature data files(s) on the LiveUpdate server
C. check the date of the associated signature data file(s) on the IT database
D. check the date of the associated signature data file(s) in the policy manager
Answer: A
Symantec ST0-050 ST0-050인증
NO.9 What is the default context in which programs are run when using the patch requirement in a Host
Integrity policy?
A. in logged-in user context
B. in system context
C. in administrator user context
D. in domain-user context
Answer: B
Symantec ST0-050 ST0-050 dumps ST0-050최신덤프 ST0-050
NO.10 How can the client be enabled to write the Host Integrity script to the disk?
A. set a condition in a custom requirement to write the script
B. set it in the Host Integrity policy under Advanced settings
C. enable debug logging through the registry on the endpoint
D. enable from the Clients tab under the Endpoint Machines Properties
Answer: C
Symantec ST0-050 ST0-050
NO.11 What must an administrator specify in a custom requirement that is different from a predefined
requirement?
A. the client's policy manager domain
B. the client's group assignment
C. the policy's ending Host Integrity state
D. the policy's log entries
Answer: C
Symantec최신덤프 ST0-050 ST0-050 ST0-050
NO.12 When choosing to run a script as an action in a custom requirement, which file format(s) can be used
to write the script?
A. only BAT or INI formats
B. only Pearl scripting
C. a custom file format with the .symc extension
D. any executable format recognized by Windows
Answer: D
Symantec ST0-050 ST0-050최신덤프
NO.13 When is Host Integrity Checking enabled on a Symantec Network Access Control (SNAC) client?
A. when the Host Integrity policy is configured and distributed to the client
B. when the SNAC client is updated by LiveUpdate for content
C. during the heartbeat authentication process with the Enforcer
D. automatically when an upgrade to SNAC is made
Answer: A
Symantec ST0-050인증 ST0-050덤프
NO.14 Which custom requirement utility allows an administrator the ability to choose an informative icon to
display to the end user?
A. run a script
B. log message
C. show message dialog
D. run a program
Answer: C
Symantec dumps ST0-050 ST0-050자격증 ST0-050
NO.15 What is AVScript.js used for?
A. client status
B. to write to the system log
C. to start the status monitor
D. Host Integrity
Answer: D
Symantec ST0-050기출문제 ST0-050 ST0-050
NO.16 To verify that a Symantec Endpoint Protection Manager has Symantec Network Access Control
functionality, what change to the Policies tab would an administrator see?
A. Host Integrity
B. Host Checking
C. Host Compliance
D. Host Inspection
Answer: A
Symantec시험문제 ST0-050 ST0-050자격증 ST0-050 ST0-050
NO.17 Which settings are specific to Antivirus and Antispyware predefined requirements?
A. application startup command
B. signature file check
C. execute an installation package
D. allow user to cancel remediation
Answer: B
Symantec ST0-050덤프 ST0-050 dump ST0-050
NO.18 A Helpdesk technician is examining the logs for a particular client when he notices something odd. A
Host Integrity event is listed for a client as failing a requirement, but that client machine is still able to
access the network even after having the check rerun several times. Why would the client's Host Integrity
status still pass?
A. The requirement logic is malfunctioning and the Helpdesk technician should notify the administrator to
contact the vendor.
B. It is likely to be a problem with the recording of the status. The log search must be rerun to update the
status.
C. The administrator has configured that requirement to allow the Host Integrity policy to pass even if it
fails.
D. The administrator has configured the OS to ignore Host Integrity even when it fails.
Answer: C
Symantec dump ST0-050인증 ST0-050 ST0-050인증
NO.19 Where does an administrator view compliance log files?
A. from the specific client in the Network Access Control log
B. from the Policy Manager console in the Monitors page
C. from the Policy Manager console in the Admin page
D. from the Enforcer debug logs
Answer: B
Symantec ST0-050자료 ST0-050자료 ST0-050 dump ST0-050
NO.20 Where are Symantec Network Access Control client packages placed on the Symantec Endpoint
Protection Manager?
A. Client/Policies
B. Admin/Install Packages
C. Policies/Policy Components
D. Clients/Install Packages
Answer: B
Symantec ST0-050 ST0-050 ST0-050 ST0-050
ITexamdump의 000-N34덤프의 VCE테스트프로그램과 000-196덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-597시험에 대비한 고품질 덤프와 C_TFIN52_66시험 최신버전덤프를 제공해드립니다. 최고품질 HP0-S33시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기