우리ITExamDump 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리ITExamDump는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.IBM 000-617인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리ITExamDump 는 여러분이 100%IBM 000-617인증시험을 패스할 수 있다는 것을 보장합니다.
ITExamDump 에서 출시한IBM인증000-617 덤프는IBM인증000-617 실제시험의 출제범위와 출제유형을 대비하여 제작된 최신버전 덤프입니다. 시험문제가 바뀌면 제일 빠른 시일내에 덤프를 업데이트 하도록 최선을 다하고 있으며 1년 무료 업데이트서비스를 제공해드립니다. 1년 무료 업데이트서비스를 제공해드리기에 시험시간을 늦추어도 시험성적에 아무런 페를 끼치지 않습니다. ITExamDump에 믿음을 느낄수 있도록 구매사이트마다 무료샘플 다운가능기능을 설치하였습니다.무료샘플을 체험해보시고ITExamDump을 선택해주세요.
ITExamDump는 IT인증자격증을 취득하려는 IT업계 인사들의 검증으로 크나큰 인지도를 가지게 되었습니다. 믿고 애용해주신 분들께 감사의 인사를 드립니다. IBM 000-617덤프도 다른 과목 덤프자료처럼 적중율 좋고 통과율이 장난이 아닙니다. 덤프를 구매하시면 퍼펙트한 구매후 서비스까지 제공해드려 고객님이 보유한 덤프가 항상 시장에서 가장 최신버전임을 약속해드립니다. IBM 000-617덤프만 구매하신다면 자격증 취득이 쉬워져 고객님의 밝은 미래를 예약한것과 같습니다.
ITExamDump사이트에서 제공하는IBM 인증000-617 덤프의 일부 문제와 답을 체험해보세요. 우리 ITExamDump의 를IBM 인증000-617 덤프공부자료를 선택해주신다면 우리는 최선을 다하여 여러분이 꼭 한번에 시험을 패스할 수 있도록 도와드리겠습니다.만약 여러분이 우리의 인증시험 덤프를 보시고 시험이랑 틀려서 패스를 하지 못하였다면 우리는 무조건 덤프비용 전부를 환불해드릴것입니다. ITExamDump제품으로 자격증을 정복합시다!
시험 번호/코드: 000-617
시험 이름: IBM (IBM Certified System Admin - DB2 10 System Admin for z/OS)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 126 문항
업데이트: 2013-12-10
IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. IBM인증 000-617시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITExamDump는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITExamDump의IBM인증 000-617덤프로 자격증을 편하게 취득하는게 어떨가요?
000-617 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-617.html
NO.1 What is the process to automatically start an audit policy at DB2 startup?
A. Specify DSNZPARM subsystem parameters AUDITST = *
B. Specify DSNZPARM subsystem parameter AUDITST = YES
C. Specify DSNZPARM subsystem parameter TRACSTR = YES
D. UPDATE SYSIBM.SYSAUDITPOLICIES SET DB2START=Y for the row of the audit policy to be auto
started.
Answer: D
IBM 000-617자격증 000-617 dump 000-617
NO.2 The DB2 command -SET SYSPARM lets you change subsystem parameters while DB2 is up.
What is the correct syntax for loading a different DSNZPARM load module?
A. -SET SYSPARM LOAD
B. -SET SYSPARM RELOAD
C. -SET SYSPARM(dsnzparm name)
D. -SET SYSPARM LOAD(dsnzparm name)
Answer: D
IBM인증 000-617 000-617 000-617인증 000-617기출문제 000-617 dumps
NO.3 Which limiting attribute CANNOT be included in the definition of a trusted context?
A. A DB2 SSID.
B. An IPv4 address.
C. An IPv6 address.
D. A secure domain name.
Answer: A
IBM dump 000-617 000-617
NO.4 DB2 10 enhances the profile table monitoring facility to support the filtering and threshold monitoring for
the number of connections using which categories?
A. All local and DRDA connections.
B. Collection IDs and IP addresses.
C. Role and Authorization Identifiers.
D. Product Identifiers and Package Names.
Answer: C
IBM dumps 000-617덤프 000-617 000-617 pdf 000-617
NO.5 To satisfy a requirement to track and report on the administrative changes made by users with system
DBADM authority, which DB2 catalog table must be modified to enable this requirement.?
A. SYSIBM.SYSDBAUTH
B. SYSIBM.SYSRESAUTH
C. SYSIBM.SYSUSERAUTH
D. SYSIBM.SYSAUDITPOLICIES
Answer: D
IBM 000-617 000-617자격증 000-617 pdf
NO.6 To cancel any type of thread using a -CANCEL THREAD command what information is needed?
A. The token of the thread to be canceled.
B. The luwid of the thread to be canceled.
C. The connection name of the thread to be canceled.
D. The correlation name of the thread to be canceled.
Answer: A
IBM자격증 000-617 dumps 000-617최신덤프 000-617시험문제 000-617
NO.7 You have implemented hash access on a production table. In order to optimize hash access
performance you need to monitor the storage space utilized by hash access. How would you accomplish
this?
A. View real time statistics for the table.
B. Run RUNSTATS with the UPDATE SPACE option.
C. Issue the -DISPLAY DATABASE(*) SPACENAM(*) USE command.
D. Utilize a monitoring profile using the -DISPLAY PROFILE command.
Answer: A
IBM 000-617 pdf 000-617자료 000-617
NO.8 The standard audit trace has limitations. Which statement is true?
A. You can audit the catalog tables.
B. You can audit every access to a table.
C. You can audit all utilities including DSN1.... ones.
D. You can start a specific audit trace at DB2 startup.
Answer: D
IBM 000-617 000-617기출문제 000-617자격증 000-617 pdf
NO.9 What process does the RESTORE SYSTEM utility NOT perform?
A. Restores logs from the log copy pool.
B. Applies logs to the data to a point in time.
C. Restores data from the database copy pool.
D. Applies only logs to the data if LOGONLY is specified.
Answer: A
IBM인증 000-617인증 000-617자료 000-617 pdf 000-617 dump
NO.10 Which statement describes a DB2 ROLE?
A. A role is a privilege.
B. A role is a USERID.
C. A role is a RACF entity.
D. A role is a database entity.
Answer: D
IBM 000-617 000-617자료 000-617
NO.11 In order to separate DB2 security administration duties from DB2 system administration duties, which
step(s) must be performed?
A. Set both SECADM system parameters to an authorization ID and Role.
B. Specify YES to SEPARATE_ SECURITY and set one SYSADM system parameter to an authorization
ID or Role.
C. Specify YES to SEPARATE_ SECURITY and set one SECADM system parameter to an authorization
ID or Role.
D. Specify YES to PROTECT parameter and set one SECADM system parameter to an
authorization ID or Role.
Answer: C
IBM인증 000-617 000-617 000-617 pdf 000-617
NO.12 What is NOT required for recovery of the DB2 catalog at a disaster recovery site?
A. All catalog table spaces.
B. IBM defined indexes on the catalog.
C. XML objects for the catalog table spaces.
D. LOB objects for the catalog table spaces.
Answer: C
IBM 000-617 000-617 000-617 000-617
NO.13 You start your DB2 subsystem and check the messages in the MSTR address space. DB2 issues
message DSNJ120I indicating that it detected unequal timestamps in the BSDSs. What is the required
action to allow DB2 to start successfully?
A. DB2 restart is halted and an open reply lets you use the -RECOVER BSDS command to fix the
problem.
B. Use the VSAM REPRO utility to overwrite the older BSDS with the most recent one and issue START
DB2 again.
C. DB2 shuts down when this problem occurs. You must issue -START DB2 again and DB2 will try to
re-synchronize the BSDSs now.
D. No action is needed. DB2 automatically tries to re-synchronize and continues with the restart if the
re-synchronization was successful.
Answer: D
IBM 000-617 dumps 000-617
NO.14 Which of the following statements is NOT correct regarding the dynamic statement cache?
A. The dynamic statement cache resides in an above-the-bar pool.
B. Performance problems can occur if the dynamic statement cache is too small.
C. The REOPT(VARS) bind option is necessary in order to store the access path for a dynamic SQL
statement in the dynamic statement cache.
D. When updating statistics for an object manually, you need to invalidate statements in the dynamic
statement cache that refer to this object using RUNSTATS REPORT NO UPDATE NONE against the
object.
Answer: C
IBM자격증 000-617시험문제 000-617 000-617덤프
NO.15 When a data sharing member fails, what is the final state of the connections to the DB2 lock structure
in the coupling facility?
A. It is finally marked as FAILING.
B. It is immediately marked as FAILED PERSISTENT for the failing member.
C. It is marked as FAILING and then finally changed to FAILED PERSISTENT upon receiving
DiscFailCon from all members.
D. It is marked as FAILED PERSISTENT and then finally changed to FAILING upon receiving
DiscFailCon from all members.
Answer: C
IBM 000-617 000-617 000-617인증 000-617덤프
NO.16 Assume that you have implemented identity propagation and that the distributed user name is 'MARY'.
You have mapped this user name to the RACF user ID 'DB2USER1'. Which statement is true?
A. 'MARY' is authenticated by RACF.
B. 'DB2USER1' must be defined on the remote system.
C. Remote requests execute with the authority of 'MARY'.
D. Audit records for this transaction contains both RACF user ID 'DB2USER1' and the distributed user
'MARY'.
Answer: D
IBM 000-617 000-617최신덤프
NO.17 What does the command -ALTER GROUPBUFFERPOOL(GBP1) RATIO(5.6) do?
A. Changes the ratio of directory entries to the local cache entries (LCE).
B. Changes the desired ratio of the number of lock entries to the number of data pages in the group buffer
pool.
C. Changes the desired ratio of the number of directory entries to the number of data pages in the group
buffer pool.
D. Changes the desired number of the data pages cast out to those that remain in the group buffer pool
when the group buffer pool checkpoint occurs.
Answer: C
IBM시험문제 000-617 000-617 pdf 000-617 dump 000-617 000-617기출문제
NO.18 You have just defined the profile monitoring tables and related indexes using the DSNTIJSG job in the
SDSNSAMP library. In order to monitor the number of remote threads and connections you must insert
rows into the SYSIBM.DSN_PROFILE_TABLE and SYSIBM.DSN_PROFILE_ATTRIBUTES tables to
specify the monitoring functions to be used.
What is the next step in this process?
A. Issue the -START PROFILE command.
B. Issue the -DISPLAY THREAD command.
C. Issue the -START TRACE (MONITOR) command.
D. No further steps are needed. DB2 will automatically begin monitoring those DB2 threads identified in
the monitoring profile.
Answer: A
IBM최신덤프 000-617 pdf 000-617 000-617
NO.19 In a production DB2 subsystem, the display of database DBFW8401 shows that pages have been
added to the LPL. The indexes for the database have the COPY NO attribute.
Which utility is used to remove these pages from the LPL status?
A. REPAIR
B. RECOVER
C. CHECK INDEX
D. REBUILD INDEX
Answer: D
IBM 000-617 000-617최신덤프 000-617 000-617최신덤프
NO.20 Which directory table space CANNOT be REORGed in DB2 10?
A. DSNDB01.SPT01
B. DSNDB01.SCT02
C. DSNDB01.SYSUTILX
D. DSNDB01.SYSLGRNX
Answer: C
IBM시험문제 000-617최신덤프 000-617
ITexamdump의 1Z0-027덤프의 VCE테스트프로그램과 700-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB7-701시험에 대비한 고품질 덤프와 74-324시험 최신버전덤프를 제공해드립니다. 최고품질 BAS-004시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기