2013년 10월 6일 일요일

EMC E22-275 인증 덤프

만약 아직도EMC E22-275인증시험 위하여 많은 시간과 정력을 소모하며 열심히 공부하고 있습니까? 아직도 어덯게하면EMC E22-275인증시험을 빠르게 취득할 수 있는 방법을 못찿고 계십니까? 지금ITExamDump에서EMC E22-275인증시험을 안전하게 넘을 수 있도록 대책을 내드리겠습니다. 아주 신기한 효과가 있을 것입니다.

It 업계 중 많은 분들이 인증시험에 관심이 많은 인사들이 많습니다.it산업 중 더 큰 발전을 위하여 많은 분들이EMC E22-275를 선택하였습니다.인증시험은 패스를 하여야 자격증취득이 가능합니다.그리고 무엇보다도 통행증을 받을 수 잇습니다.EMC E22-275은 그만큼 아주 어려운 시험입니다. 그래도EMC E22-275인증을 신청하여야 좋은 선택입니다.우리는 매일매일 자신을 업그레이드 하여야만 이 경쟁이 치열한 사회에서 살아남을 수 있기 때문입니다.

ITExamDump의 EMC인증 E22-275덤프를 선택하여EMC인증 E22-275시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고EMC인증 E22-275시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. EMC인증 E22-275덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.

EMC인증 E22-275시험을 가장 빠른 시일내에 가장 쉬운 방법으로 패스하는 방법을 고심초사한끝에 ITExamDump에서 연구해 내었습니다. 그건 바로ITExamDump의EMC인증 E22-275덤프로EMC인증 E22-275시험에 대비하는것입니다. ITExamDump의EMC인증 E22-275덤프품질을 검증하려면 구매사이트의 무료샘플을 체험해보시면 됩니다.자격증을 많이 취득하여 멋진 IT전문가로 되세요.

시험 번호/코드: E22-275
시험 이름: EMC (recoverpoint backup and recovery specialist exam )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 126 문항
업데이트: 2013-10-05

ITExamDump에서 출시한 EMC인증E22-275 덤프는 시험문제점유율이 가장 높은 시험대비자료입니다. 실제EMC인증E22-275시험문제유형과 같은 형식으로 제작된EMC인증E22-275 시험공부자료로서ITExamDump덤프의 실용가치를 자랑하고 있습니다.덤프를 공부하여 시험불합격하시면 덤프비용은 환불처리해드립니다.

아직도 EMC인증E22-275시험준비를 어떻게 해야 할지 망설이고 계시나요? 고객님의 IT인증시험준비길에는 언제나 ITExamDump가 곁을 지켜주고 있습니다. ITExamDump시험공부자료를 선택하시면 자격증취득의 소원이 이루어집니다. EMC인증E22-275시험덤프는ITExamDump가 최고의 선택입니다.

E22-275 덤프무료샘플다운로드하기: http://www.itexamdump.com/E22-275.html

NO.1 You have finished deploying SANTap in a RecoverPoint CRR environment. At Site 2 everything looks
fine. However, at Site 1 you see the following message on the RecoverPoint Management Application:
WARNING: RPA cannot access discovery AVT: 7001248288220000 ; Site1 ; RPA1 in Site1 ; Cisco -
CVT22-2109000dec3c3182
You have checked that back-end and front-end VSANs are properly configured with the correct members
in each. Which action can you take to perform a full discovery of ITLs and recreation of AVTs to fix this
issue?
A. SSH as 'admin' and run the refresh_santap_view command
B. Refresh the splitters on the RecoverPoint Management Application
C. Rescan the SAN on the RecoverPoint Management Application
D. SSH as 'admin' and run the get_santap_view command
Answer: A

EMC pdf   E22-275덤프   E22-275덤프   E22-275자격증   E22-275덤프

NO.2 A customer wants to add a new RecoverPoint UserID. Which role must their UserID belong to in order to
manage user settings?
A. Security
B. Admin
C. Boxmgmt
D. Monitor
Answer: A

EMC   E22-275자격증   E22-275

NO.3 Refer to the Exhibit.
You are troubleshooting High Load activities on two consistency groups (CGs). As part of your tasks, you
have run the data collect and are reviewing the system log files for the CGs.
What is a possible root cause for this High Load period?
A. The preferred RPA has lost communications with the remote RPA and caused a failover of the CG
within the cluster.
B. The local site has lost connectivity to the remote site and caused the CG to go into Marking mode.
C. There is no journal assigned to the CG in the local site, causing latency build up during data transfer.
D. The copies are cross-connected between the sites causing additional I/O to flood the connectivity
between the sites.
Answer: A

EMC   E22-275   E22-275

NO.4 Refer to the Exhibit.
You are troubleshooting a RecoverPoint issue where consistency groups, using a kdriver splitter, have
stopped working. While analyzing the problem, you ran detect Fibre Channel targets from the SAN
Diagnostics menu. What does this output tell you that relates to the problem in the environment?
A. RPA is not zoned to any hosts
B. All RPA HBA ports are being used as targets
C. Even and odd ports should not see the same targets
D. Ports 0 and 3 should not be connected to the same fabric
Answer: A

EMC자격증   E22-275자료   E22-275   E22-275   E22-275시험문제

NO.5 Which device allows the installation of a Brocade splitter into a DCX director?
A. PB-48k-18i
B. PB-48k-AP
C. PB-DCX-32P-E
D. PB-DCX-48P-8G
Answer: B

EMC   E22-275자료   E22-275   E22-275시험문제   E22-275   E22-275

NO.6 You have installed the Solaris kdriver on a host. When validating the installation, you find that the
splitter is not seen by the RecoverPoint Management Application. Other splitters appear correctly in the
GUI.
Which step should you take on the host to discover the splitter by the GUI?
A. Run the /etc/init.d/kdrv start command
B. Run the rc.kdrv configure command and restart the kdriver
C. Run the rc.kdrv start command and reboot the host
D. Run the devfsadm command
Answer: A

EMC dumps   E22-275인증   E22-275   E22-275   E22-275

NO.7 You are installing the RecoverPoint splitter agent on a B-Series switch. After downloading the agent
binary file to the blade processor, which step must be completed prior to successfully running the
command?
A. chmod +x agent_binary_file
B. chmod +rw agent_binary_file
C. /thirdparty/recoverpoint/install/zoning_script.sh
D. /thirdparty/recoverpoint/install/kdrv start
Answer: A

EMC   E22-275자료   E22-275최신덤프   E22-275   E22-275   E22-275

NO.8 What is the blade processor in a Brocade splitter?
A. A separate command shell which loads and operates the splitter
B. A special slot in a Brocade director with intelligent switch capabilities
C. A daughterboard in the switch to allow RecoverPoint integration
D. A dedicated memory space in the RPA to integrate with a Brocade switch
Answer: A

EMC최신덤프   E22-275 dump   E22-275자격증   E22-275 dumps

NO.9 A customer is planning to deploy a 2-node RecoverPoint cluster at each data center. They will make use
of dual stack for its LAN network connection.
How many IP addresses should the customer plan for per site, including management IP addresses.?
A. 5
B. 6
C. 7
D. 8
Answer: D

EMC pdf   E22-275   E22-275자격증

NO.10 You have just enabled the zones and re-enabled the configuration on a AP-7600B switch. Where would
you run the thirdparty/recoverpoint/install/kdrv status command to verify the status of the kdriver on the
switch?
A. As root in the blade processor
B. As admin in the blade processor
C. As root in the control processor
D. As admin in the control processor
Answer: A

EMC덤프   E22-275시험문제   E22-275인증

NO.11 In a cascaded RecoverPoint configuration, a customer experiences a site failure at the secondary site.
What impact does this have on replication?
A.Site 1 to Site 2 replication fails Site 2 to Site 3 replication fails
B.Site 1 to Site 2 replication fails Site 2 to Site 3 replication continues
C.Site 1 to Site 2 replication fails Site 1 to Site 3 replication continues
D.Site 2 to Site 3 replication fails Site 1 to Site 3 replication continues
Answer: A

EMC덤프   E22-275   E22-275

NO.12 Which generation of RecoverPoint Appliance hardware must be used to ensure you can use a CRR
over FC configuration?
A. Gen2 and 3 only
B. Gen2 and 4 only
C. Gen2, 3, and 4
D. Gen3 and 4 only
Answer: D

EMC dump   E22-275   E22-275   E22-275인증   E22-275자격증   E22-275 dumps

NO.13 You are selecting the RecoverPoint repository volume using Deployment Manager at a customer's site.
If the customer's environment makes use of an EMC VNX array, what needs to be considered?
A. Selected LUN will be formatted
B. Use of a thin provisioned LUN is supported
C. LUN is accessible by only one RPA
D. Thin LUNs have to be pre-allocated
Answer: A

EMC시험문제   E22-275   E22-275덤프   E22-275기출문제   E22-275자료

NO.14 When installing a Microsoft Windows kdriver splitter, you receive the dialog box shown in the exhibit
and the installation stops.
What must you do to recover the installation?
A. Click Next, correct the SAN issue, and run SAN Diagnostics again
B. Click Next and Accept the SAN issue warning to continue the installation
C. Click Next to resume the installation with flags
D. Click Back to reconfigure the kdriver parameters
Answer: A

EMC   E22-275기출문제   E22-275   E22-275인증

NO.15 You are implementing a RecoverPoint CRR solution. The RPAs that were delivered do not have the
correct version of RecoverPoint.
What is the EMC-preferred way to load the correct software version to the RPAs?
A. Before launching Deployment Manager
B. During the Deployment Manager installation process
C. After completing the installation but before the license is installed
D. After the installation is complete
Answer: A

EMC   E22-275 pdf   E22-275 dump

NO.16 In a Brocade splitter implementation using frame redirect mode, how many DPCs are available?
A. 1
B. 2
C. 3
D. 4
Answer: B

EMC   E22-275   E22-275최신덤프   E22-275

NO.17 You are finalizing a RecoverPoint setup that makes use of the Symmetrix VMAXe splitter. You are about
to create the masking view for the RecoverPoint cluster initiator group.
Which setting must be enabled to allow the RPAs to write to the replica volumes when image access is
disabled?
A. Write Protect Bypass
B. Always Push Old
C. Backlog Mirroring
D. Device Tagging
Answer: A

EMC자료   E22-275   E22-275   E22-275

NO.18 A customer has a RecoverPoint environment defined with two RPAs at each site. They created two
consistency groups (CGs), each one in a different RPA. Their business requires that both consistency
groups act as a single unit as they are dependent on one another.
How can they achieve this requirement?
A. Create one Group Set for both CGs
B. Enable the RecoverPoint Snapshot Consolidation feature
C. Select the same primary RPA for both CGs
D. Configure distributed consistency groups
Answer: A

EMC인증   E22-275 dump   E22-275   E22-275덤프

NO.19 You have a customer with an EMC VNX array at each site that uses both block and file storage. They
would like to use the VNX splitter to replicate all their iSCSI data LUNs.
How would you configure RecoverPoint?
A. Use the Consistency Group Wizard to create a CG
B. Use Installation Manager and "Expose" all iSCSI LUNs
C. Check the "Enable iSCSI Replication" option in the CG profile
D. Replication of iSCSI LUNs are not supported at this time
Answer: A

EMC최신덤프   E22-275   E22-275자격증   E22-275자격증   E22-275덤프   E22-275시험문제

NO.20 You want to upgrade a RecoverPoint environment using Deployment Manager (DM). As a prerequisite
to continuing with the upgrade, which TCP port needs to be open between the management station where
the DM is installed and the RPA management IP addresses?
A. 22
B. 23
C. 80
D. 161
Answer: A

EMC덤프   E22-275기출문제   E22-275 pdf   E22-275

ITexamdump의 FCNSA.v5덤프의 VCE테스트프로그램과 ICBB덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1z0-460시험에 대비한 고품질 덤프와 74-344시험 최신버전덤프를 제공해드립니다. 최고품질 C_TFIN52_64시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/E22-275.html

댓글 없음:

댓글 쓰기