IT업계 종사자라면 누구나 Microsoft 인증070-683시험을 패스하고 싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 맞습니다. 패스할 확율은 아주 낮습니다. 노력하지 않고야 당연히 불가능한 일이 아니겠습니까? Microsoft 인증070-683 시험은 기초 지식 그리고 능숙한 전업지식이 필요 합니다. ITExamDump는 여러분들한테Microsoft 인증070-683시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. ITExamDump의Microsoft 인증070-683시험관련 자료로 여러분은 짧은 시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.
ITExamDump는Microsoft 070-683인증시험의 촉매제 같은 사이트입니다.Microsoft 070-683인증시험 관연 덤프가 우리ITExamDump에서 출시되었습니다. 여러분이Microsoft 070-683인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 ITExamDump의Microsoft 070-683덤프자료가 많은 도움이 될 것입니다.
많은 분들은Microsoft 070-683인증시험이 아주 어려운 것은 알고 있습니다. 하지만 우리ITExamDump를 선택함으로Microsoft 070-683인증시험은 그렇게 어렵지 않다는 것을 알게 될 것입니다. Pass4Tes의Microsoft 070-683합습가이드는 시험의 예상문제부터 전면적이로 만들어진 아주 퍼펙트한 시험자료입니다. 우리의 서비스는Microsoft 070-683구매 후 최신버전이 업데이트 시 최신문제와 답을 모두 무료로 제공합니다.
IT업계의 치열한 경쟁속에 살아 남으려면 자신의 능력을 증명하여야 합니다. 국제승인을 받는 IT인증자격증을 많이 취득하시면 취직이든 승진이든 이직이든 모든 면에서 이득을 볼수 있습니다. 최근 Microsoft인증 070-683시험에 도전하는 분이 많은데 ITExamDump에서 Microsoft인증 070-683시험에 대비한 가장 최신버전 덤프공부가이드를 제공해드립니다.
ITExamDump의Microsoft인증 070-683덤프는 고객님의 IT인증자격증을 취득하는 소원을들어줍니다. IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. ITExamDump의Microsoft인증 070-683덤프는 실제 시험문제에 대비하여 연구제작된 퍼펙트한 시험전 공부자료로서 시험이 더는 어렵지 않게 느끼도록 편하게 도와드립니다.
거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Microsoft인증 070-683시험은 무조건 패스해야 합니다. 하지만Microsoft인증 070-683시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는Microsoft인증 070-683시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전Microsoft인증 070-683덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는Microsoft인증 070-683영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
시험 번호/코드: 070-683
시험 이름: Microsoft (TS: Windows 7, Preinstalling for OEMs )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 87 문항
업데이트: 2013-09-10
070-683 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-683.html
NO.1 You are preparing a Windows 7 image. You install several out-of-box drivers. You plan to generalize the
image, and then deploy the image to computers that have the exact same hardware as the reference
computer. You need to ensure that when the image is deployed, that hardware devices are not
re-detected during the specialize configuration pass. What should you do before you generalize the
computer?
A.Set the DriverPaths value in the Oobe.xml file.
B.Set the DriverPaths value in the Unattend.xml file.
C.Set the PersistAllDeviceInstalls value in the Oobe.xml file.
D.Set the PersistAllDeviceInstalls value in the Unattend.xml file.
Answer: D
Microsoft자료 070-683 070-683 pdf 070-683 070-683자격증
NO.2 You have a computer that runs Windows 7. You start a capture of the computer to an image and get the
following error message. The process cannot access the file because it is being used by another process.
You need to create an image of the computer. What should you do before you capture the image?
A.Disable the paging file.
B.Stop the Windows Search service.
C.Start the command prompt by using elevated privileges.
D.Start the Computer by using Windows Preinstallation Environment (Windows PE).
Answer: D
Microsoft자격증 070-683 070-683최신덤프 070-683시험문제
NO.3 You have a Windows 7 image. You mount the image, add additional files to the image, and then
successfully unmount the image. You notice that the additional files are not in the image. You need to
ensure that the additional files are saved in the image. What should you do?
A.Run imagex.exe and specify the /mount parameter.
B.Run imagex.exe and specify the /commit parameter.
C.Run dism.exe and specify the /scratchdir parameter.
D.Run dism.exe and specify the /cleanup-wim parameter.
Answer: B
Microsoft자격증 070-683자격증 070-683자격증
NO.4 You deploy a generalized image on a computer. You need to start Windows 7 on the computer. Your
solution must prevent Windows Welcome from completing. What should you do?
A.Start the computer, and then press SHIFT+F10.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Start the computer from the Windows 7 installation media, and then select Repair computer.
D.Start the computer from Windows PE, and then run Dism.exe and specify the /add-package parameter.
Answer: B
Microsoft dump 070-683자격증 070-683최신덤프
NO.5 You prepare a Windows 7 image. You need to ensure that the system clock is automatically set to the
Central Time (UTC -6.00) time zone when the image is deployed. Your solution must prevent time zone
customizations during Windows Welcome. What should you do?
A.On the reference computer, modify the Time Zone. Generalize and capture the image.
B.Generalize and capture the image. Create an Oobe.xml file that specifies the time zone.
C.Generalize and capture the image. Create a Winpeshl.ini file that specifies the time zone.
D.On the reference computer, run Dism.exe and specify the /set-timezone parameter. Generalize and
capture the image.
Answer: B
Microsoft최신덤프 070-683 070-683 dump
NO.6 You have Windows Image (WIM) file that contains an image of Windows 7. You plan to deploy the
image to computers that have a third-party hardware component. The device driver for the hardware
component can only be installed by using an executable provided by the hardware vendor. You need to
ensure that the device driver is installed when you deploy the image. What should you do first?
A.On a reference computer, run Drvload.exe.
B.On a reference computer, run Imagex.exe and specify the /apply parameter.
C.On a technicians computer, run Imagex.exe and specify the /mount parameter.
D.On a technicians computer, run Dism.exe and specify the /add-driver parameter.
Answer: B
Microsoft 070-683기출문제 070-683인증 070-683
NO.7 You attempt to capture an image to a Windows Deployment Services (WDS) server as shown in the
exhibit. (Click the Exhibit button.) You need to capture the image to the WDS server. What should you do?
A.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /audit. Restart the computer by using Pre-Boot eXecution Environment (PXE).
B.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /generalize. Restart the computer by using Pre-Boot eXecution Environment (PXE).
C.Start Windows 7 on the reference computer, and then run sysprep.exe /audit. Restart the computer by
using Pre-Boot eXecution Environment (PXE).
D.Start Windows 7 on the reference computer, and then run sysprep.exe /generalize. Restart the
computer by using Pre-Boot eXecution Environment (PXE).
Answer: D
Microsoft시험문제 070-683 070-683
NO.8 You deploy a generalized image of Windows 7 to a computer. You start the computer in audit mode.
You need to ensure that Windows Welcome runs when you restart the computer. What should you do?
A.Start the computer, and then press F12.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Run Sysprep.exe and specify the /oobe parameter.
D.Run Dism.exe and specify the /cleanup-image parameter.
Answer: C
Microsoft 070-683 070-683 070-683시험문제
NO.9 You mount a Windows 7 image. You need to add a text file to the image. Which tool should you use?
A.Dism.exe
B.ImageX.exe
C.Windows Explorer
D.Windows System Image Manager
Answer: C
Microsoft pdf 070-683 070-683 dumps 070-683 pdf
NO.10 You have a Windows Image (WIM) file named Image.wim that contains a Windows 7 image. The
default compression settings were used when creating the WIM file. You create a new image. You need to
ensure that both images are stored by using maximum compression. What should you do?
A.Append the new image to Image.wim.
B.Export the existing image, and then append the new image to Image.wim.
C.Run Compact.exe and specify the /c parameter. Run Dism.exe and specify the /remount-WIM
parameter.
D.Run Imagex.exe and specify the /mountrw parameter. Run Dism.exe and specify the /cleanup-WIM
parameter.
Answer: B
Microsoft자료 070-683 070-683 070-683자격증 070-683
ITexamdump의 LOT-440덤프의 VCE테스트프로그램과 1Z0-027덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C-TSCM62-65시험에 대비한 고품질 덤프와 CAT-500시험 최신버전덤프를 제공해드립니다. 최고품질 70-415시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기