2014년 2월 28일 금요일

Microsoft 70-693 인증시험

자신을 부단히 업그레이드하려면 많은 노력이 필요합니다. IT업종 종사자라면 국제승인 IT인증자격증을 취득하는것이 자신을 업그레이드하는것과 같습니다. Microsoft인증 70-693시험을 패스하여 원하는 자격증을 취득하려면ITExamDump의Microsoft인증 70-693덤프를 추천해드립니다. 하루빨리 덤프를 공부하여 자격증 부자가 되세요.

경쟁이 치열한 IT업계에서 굳굳한 자신만의 자리를 찾으려면 국제적으로 인정받는 IT자격증 취득은 너무나도 필요합니다. Microsoft인증 70-693시험은 IT인사들중에서 뜨거운 인기를 누리고 있습니다. ITExamDump는 IT인증시험에 대비한 시험전 공부자료를 제공해드리는 전문적인 사이트입니다.한방에 쉽게Microsoft인증 70-693시험에서 고득점으로 패스하고 싶다면ITExamDump의Microsoft인증 70-693덤프를 선택하세요.저렴한 가격에 비해 너무나도 높은 시험적중율과 시험패스율, 언제나 여러분을 위해 최선을 다하는ITExamDump가 되겠습니다.

시험 번호/코드: 70-693
시험 이름: Microsoft (Windows Server 2008R2, Virtualization Administrator)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 140 문항
업데이트: 2014-02-27

ITExamDump에서는Microsoft 인증70-693시험대비덤프를 발췌하여 제공해드립니다. Microsoft 인증70-693시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인Microsoft 인증70-693시험대비덤프로Microsoft 인증70-693시험준비공부를 해보세요. 통과율이 100%입니다.

우리ITExamDump에서는 끊임없는 업데이트로 항상 최신버전의Microsoft인증70-693시험덤프를 제공하는 사이트입니다, 만약 덤프품질은 알아보고 싶다면 우리ITExamDump 에서 무료로 제공되는 덤프일부분의 문제와 답을 체험하시면 되겠습니다, ITExamDump 는 100%의 보장 도를 자랑하며70-693시험은 한번에 패스할 수 있는 덤프입니다.

70-693 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-693.html

NO.1 Your environment includes the virtual machines (VMs) shown in the following table. server Server1
and Server2 communicate with each other over a Hyper-V private virtual network. End-user connectivity
to the application server is provided by an external virtual network. You need to monitor network traffic
between Server1 and Server2 so that you can create a baseline to appropriately set thresholds for future
monitoring.
Which counter should you monitor?
A. Network Interface Bytes Total/sec
B. Hyper-V Virtual Switch Bytes/sec
C. Hyper-V Virtual Network Adapter Bytes Sent/sec
D. Hyper-V Virtual Network Adapter Bytes Received/sec
Answer: B

Microsoft시험문제   70-693 dumps   70-693   70-693자격증

NO.2 All servers in your environment run Windows Server 2008 R2. You are planning a Microsoft System
Center Virtual Machine Manager (VMM) 2008 R2 Self-Service Portal deployment. You need to ensure
that members of the Security Compliance group can create new virtual machines (VMs). You install the
VMM 2008 R2 Self Service Portal and add the Security Compliance group to the Self Service host group.
What should you do next?
A. Assign the computer accounts for all Hyper-V servers the Read permission to the library share and
NTFS folders. Grant the Log on as a service right to the Security Compliance group.
B. Assign the service account for the Hyper-V Image Management Service the Read permission to the
library share and NTFS folders. Grant the Log on as a service right to the service account for the Hyper-V
Image Management Service.
C. Configure the self-service user role to create new VMs. Add the Security Compliance group to the
self-service user role. Grant members of the self-service user role access to the library share.
D. Configure constrained delegation for the Security Compliance group on the library server. Grant the
Log on as a service right to the service account for the Hyper-V Image Management Service.
Answer: C

Microsoft덤프   70-693   70-693 pdf   70-693

NO.3 Client computers on your network run either Windows Vista or Windows 7. You plan to use Microsoft
Application Virtualization (App-V) 4.5 with SP1 as an application virtualization platform. You need to
virtualize applications by using mount point installations (MNT).
What should you do?
A. Configure the App-V Sequencer to have two partitions.
B. Configure the App-V Sequencer on a Windows 7 client computer.
C. Configure virtualized applications to check for updates during installation.
D. On the reference computer, install all software that typically runs on client computers.
Answer: A

Microsoft   70-693 dump   70-693   70-693   70-693   70-693자격증

NO.4 You deploy two Windows Server 2008 R2 Hyper-V servers. You manage the servers by using
Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You need to ensure that you can
restore virtual machines (VMs) in the event of a hardware failure.
What should you do?
A. Use a PowerShell script to create a snapshot of each VM. Run the script every 60 minutes on each
Hyper-V server.
B. Use a PowerShell script to create a checkpoint of each VM. Run the script every 60 minutes on each
Hyper-V server.
C. Use a PowerShell script to pause, export, and start each VM, and then to copy the export to the
opposite Hyper-V server. Run the script once per day on each Hyper-V server.
D. Use a PowerShell script to shut down, export, and start each VM, and then to copy the export to the
opposite Hyper-V server. Run the script once per day on each Hyper-V server.
Answer: D

Microsoft시험문제   70-693   70-693 pdf

NO.5 All servers on your company's network run Windows Server 2008 R2. All client computers run Windows
Vista.
The company is planning to virtualize an application that runs only on Windows 2000 Professional. You
need to recommend a virtualization solution that enables users to run the virtualized application while
their computers are disconnected from the corporate network.
Which technology should you recommend?
A. Remote Desktop Services (RDS)
B. Microsoft Application Virtualization (App-V)
C. Microsoft Virtual Desktop Infrastructure (VDI)
D. Microsoft Enterprise Desktop Virtualization (MED-V)
Answer: D

Microsoft dumps   70-693덤프   70-693자격증   70-693

NO.6 All servers on your company's network run Windows Server 2008 R2. All client computers run Windows
Vista.
The company is planning to virtualize an application that is CPU intensive and that runs only on Windows
Vista and Windows 7. You need to recommend a virtualization solution that minimizes the use of CPU
resources on the server.
Which technology should you recommend?
A. Remote Desktop Services (RDS)
B. Microsoft Application Virtualization (App-V)
C. Microsoft Virtual Desktop Infrastructure (VDI)
D. Microsoft Enterprise Desktop Virtualization (MED-V)
Answer: B

Microsoft   70-693 dumps   70-693자료

NO.7 All servers on your network run Windows Server 2008 R2. You plan to configure multiple highly
available virtual machines (HAVMs) on a Hyper-V failover cluster. You need to recommend a storage
solution that supports high availability.
Which storage solution should you recommend?
A. a direct-attached storage (DAS) device
B. a multipath serial-attached SCSI drive with a witness disk
C. a multipath Fibre Channel logical unit number (LUN) with a witness disk
D. a multipath iSCSI logical unit number (LUN) with Cluster Shared Volumes (CSVs)
Answer: D

Microsoft pdf   70-693   70-693

NO.8 You configure a Windows Server 2008 R2 Hyper-V server with several virtual machines (VMs). A
software vendor releases a software update for an application that runs on only one of the VMs. You need
to plan a strategy that enables you to install and test the update without interrupting business operations
and without corrupting data.
What should you do first?
A. Export the VM.
B. Create a snapshot of the affected VM.
C. Enable the Windows Volume Snapshot Service on the affected VM.
D. Enable the Windows Volume Snapshot Service on the Hyper-V server.
Answer: B

Microsoft   70-693시험문제   70-693   70-693

NO.9 Your company has 300 portable computers that run Microsoft Office Enterprise 2007. The company
participates in the Microsoft Software Assurance program. You are designing a solution that enables
remote employees to use Office and to access their Home folders. You plan to implement a Remote
Desktop Services (RDS) infrastructure, and you plan to deploy Office Enterprise 2007 as a virtual
application on the RDS servers.
You need to choose the appropriate licenses. Which licensing solution should you choose?
A. 1 Office Enterprise 2007 license and 300 App-V for Terminal Services licenses
B. 300 Office Enterprise 2007 licenses and 300 App-V for Terminal Services licenses
C. 300 Office Enterprise 2007 licenses and 300 Microsoft Desktop Optimization Pack (MDOP) licenses
D. 300 Windows Server 2008 R2 RDS client access licenses (CALs)
Answer: D

Microsoft   70-693   70-693   70-693기출문제

NO.10 All servers on your company's network run Windows Server 2008 R2. All users have thin client
computers. You need to recommend a virtualization solution that allows users to use applications that run
only on Windows 7.
Which technology should you recommend?
A. Windows Virtual PC
B. Microsoft Application Virtualization (App-V)
C. Microsoft Virtual Desktop Infrastructure (VDI)
D. Microsoft Enterprise Desktop Virtualization (MED-V)
Answer: C

Microsoft   70-693   70-693   70-693자료   70-693기출문제   70-693

NO.11 Your company has a main office in New York and branch offices in Chicago and Los Angeles. You plan
to use Microsoft Application Virtualization (App-V) 4.5 with SP1. You install an Application Virtualization
Management Server in the New York office. You need to provide application virtualization with active
upgrade support in the Chicago and Los Angeles offices. You must design your App-V solution so that it
minimizes WAN traffic.
What should you do?
A. Install Application Virtualization Streaming Servers in the Chicago and Los Angeles offices.
B. Install Application Virtualization Management Servers in the Chicago and Los Angeles offices.
C. Install the Application Virtualization \CONTENT folder on file shares in the Chicago and Los Angeles
offices.
D. Install the Application Virtualization \CONTENT folder on IIS 7 servers in the Chicago and Los Angeles
offices.
Answer: A

Microsoft시험문제   70-693덤프   70-693

NO.12 Your network includes Windows Server 2008 R2 Hyper-V servers. Each Hyper-V server runs multiple
virtual machines (VMs). You need to detect performance issues and generate an alert when Hyper-V
server load exceeds specific thresholds.
Which tool should you use?
A. Microsoft System Center Capacity Planner 2007
B. Microsoft System Center Operations Manager 2007 R2
C. Microsoft System Center Configuration Manager 2007 R2
D. Microsoft System Center Virtual Machine Manager 2008 R2
Answer: B

Microsoft   70-693 pdf   70-693   70-693인증

NO.13 You have a Windows Server 2008 R2 Hyper-V failover cluster. You manage the virtual environment by
using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You need to find out whether
the failover cluster is properly configured to support highly available virtual machines (VMs).
Which PowerShell cmdlet should you run?
A. Test-Cluster
B. Enable-VMHost
C. Get-VMHostRating
D. Test-ClusterResourceFailure
Answer: A

Microsoft기출문제   70-693기출문제   70-693기출문제   70-693자료

NO.14 Your virtual environment includes Windows Server 2008 R2 Hyper-V servers. The test and
development teams are developing a distributed application. The application requires a domain controller,
a server that runs Microsoft SQL Server, an application server, and a client computer. The application
uses pass-through authentication. You need to ensure that at the time of a failure, the test team can
reproduce the error and provide the application in the state in which it existed when the error occurred to
the development team for continued analysis. You must achieve this goal while minimizing storage
requirements.
What should you do?
A. Snapshot and export all servers.
B. Snapshot and export only the application server.
C. Snapshot the application server, and back up the SQL Server database.
D. Snapshot and export only the domain controller and the client computer.
Answer: A

Microsoft   70-693자료   70-693   70-693인증

NO.15 You have a Windows Server 2008 R2 Hyper-V failover cluster. You manage the cluster by using
Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You plan to monitor the environment
by using Microsoft System Center Operations Manager 2007. You need to identify when Hyper-V server
load exceeds specific CPU and memory thresholds, and you must rebalance the environment
accordingly.
What should you do?
A. Configure the Placement settings to maximize resources for each of the Hyper-V servers
B. Configure Performance and Resource Optimization (PRO) to automatically implement PRO tips
C. Configure the Placement settings for CPU and Memory as Very Important for each of the Hyper-V
servers
D. Install the Windows Server Operating System Management Pack for Operations Manager 2007, and
set the thresholds
Answer: B

Microsoft   70-693인증   70-693자격증   70-693

NO.16 You are planning to deploy two Windows Server 2008 R2 Hyper-V servers. You need to design the
storage of VHD files for maximum security.
What should you do?
A. Store the VHD files on a dedicated NTFS volume.
B. Store unencrypted VHD files on a volume that uses Windows BitLocker drive encryption.
C. Encrypt the VHD files by using EFS on a volume that uses Windows BitLocker drive encryption.
D. Encrypt the VHD files by using EFS on a volume that does not use Windows BitLocker drive
encryption.
Answer: B

Microsoft pdf   70-693덤프   70-693   70-693 pdf   70-693

NO.17 You have a two-node Hyper-V failover cluster that uses SAN storage. You are designing storage for a
new virtualization environment by using Windows Server 2008 R2. You plan to deploy five virtual
machines (VMs) per logical unit number (LUN). You need to be able to perform a live migration of a single
VM while the other VMs continue to run on the host server.
What should you do?
A. Use Cluster Shared Volumes (CSVs).
B. Use fixed disks on the SAN storage.
C. Boot the virtual machines from iSCSI LUNs.
D. Use dynamically expanding disks on an iSCSI LUN.
Answer: A

Microsoft기출문제   70-693   70-693 pdf   70-693

NO.18 You deploy a Microsoft Hyper-V Server 2008 R2 server. You will back up the server by using Microsoft
System Center Data Protection Manager (DPM) 2007 with SP1. Your virtual environment includes the
virtual machines (VMs) shown in the following table. You need to configure the DPM protection group to
minimize server downtime during business hours and to provide the best recovery point objective (RPO).
What should you do?
A. Set synchronizations to run every 15 minutes during business hours.
B. Set synchronizations to run every 30 minutes during business hours.
C. Set synchronizations to run every 45 minutes during business hours.
D. Perform express full backups every 60 minutes during non-business hours.
Answer: A

Microsoft   70-693   70-693시험문제   70-693

NO.19 Your company uses Windows Server 2008 R2 Hyper-V servers to provide a Microsoft Virtual Desktop
Infrastructure (VDI) environment. Maintenance tasks result in reduced capacity on several servers. You
need to prevent servers from experiencing performance problems during maintenance.
What should you do?
A. Set the user logon mode on every server to Enabled.
B. Create additional DNS A records for the servers, and use DNS round-robin.
C. In Remote Desktop Connection Broker, assign a lower weight to the servers that will undergo
maintenance.
D. In Remote Desktop Connection Broker, assign a higher weight to the servers that will undergo
maintenance.
Answer: C

Microsoft   70-693   70-693최신덤프

NO.20 You are designing a test environment that uses Hyper-V. The test environment must enable testers to
perform the following tasks: Quickly switch between running states. Re-create a specific state or condition.
Return the state of the environment to a specific point in time. Recover from a faulty software update by
using the fastest method. You need to ensure that the test environment meets the requirements.
What are two possible tools that you can use to achieve this goal? (Each correct Answer presents a
complete solution. Choose two.)
A. Hyper-V Manager
B. Microsoft System Center Data Protection Manager (DPM) 2007 with SP1
C. Microsoft System Center Virtual Machine Manager (VMM) 2008 R2
D. Microsoft System Center Configuration Manager (SCCM) 2007 with SP3
Answer: AC

Microsoft자료   70-693   70-693최신덤프   70-693시험문제

ITexamdump의 642-384덤프의 VCE테스트프로그램과 HP2-B104덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCAP5-DCD시험에 대비한 고품질 덤프와 70-463시험 최신버전덤프를 제공해드립니다. 최고품질 000-241시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-693.html

Microsoft 자격증 70-659 시험덤프

우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는Microsoft 70-659관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.

Microsoft 70-659인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면Microsoft 70-659인증시험이 아주 좋은 자격증입니다. 만약Microsoft 70-659인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.

우리ITExamDump에서는 끊임없는 업데이트로 항상 최신버전의Microsoft인증70-659시험덤프를 제공하는 사이트입니다, 만약 덤프품질은 알아보고 싶다면 우리ITExamDump 에서 무료로 제공되는 덤프일부분의 문제와 답을 체험하시면 되겠습니다, ITExamDump 는 100%의 보장 도를 자랑하며70-659시험은 한번에 패스할 수 있는 덤프입니다.

지난 몇년동안 IT산업의 지속적인 발전과 성장을 통해Microsoft 인증70-659시험은 IT인증시험중의 이정표로 되어 많은 인기를 누리고 있습니다. IT인증시험을ITExamDump덤프로 준비해야만 하는 이유는ITExamDump덤프는 IT업계전문가들이 실제시험문제를 연구하여 시험문제에 대비하여 예상문제를 제작했다는 점에 있습니다.

시험 번호/코드: 70-659
시험 이름: Microsoft (TS: Windows Server 2008 R2, Server Virtualization)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 145 문항
업데이트: 2014-02-27

많은 사이트에서Microsoft 인증70-659 인증시험대비자료를 제공하고 있습니다. 그중에서 ITExamDump를 선택한 분들은Microsoft 인증70-659시험통과의 지름길에 오른것과 같습니다. ITExamDump는 시험에서 불합격성적표를 받으시면 덤프비용을 환불하는 서

70-659 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-659.html

NO.1 You use Hyper-V Server 2008 R2 and failover clustering to host several virtual machines (VMs).
You need to place a disk in maintenance mode.
Which Windows PowerShell cmdlet should you run?
A. Suspend-ClusterResource
B. Stop-ClusterResource
C. Set-ClusterResourceDependency
D. Block- ClusterAccess
Answer: A

Microsoft   70-659   70-659   70-659최신덤프

NO.2 Your environment includes Hyper-V and VMware ESX. You manage your virtual environment by using
Microsoft System Center Virtual Machine manager (VMM) 2008 R2.
You plan to perform a virtual-to-virtual (V2V) conversion of a virtual machine (VM) that is located on the
ESX server.
You start the conversion by using the Convert Virtual Machine Wizard.
Communication between the destination host and the ESX server fails, and the conversion does not finish
successfully.
You need to ensure that the conversion finishes successfully.
What should you change?
A. WSMan permissions and settings
B. Windows Firewall exceptions for Background Intelligent Transfer Service (BITS)
C. Secure Shell (SSH) and HTTPS settings
D. Server Message Block (SMB) settings
Answer: C

Microsoft   70-659   70-659자격증

NO.3 You manage your virtual environment by using Microsoft System Center Virtual Machine Manager
(VMM) 2008 R2. You monitor the environment by using Microsoft System Center Operations Manager
2007 R2.
You need to enable automatic migration between Hyper-V host servers.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a host group and add the host servers to it.
B. Configure reserve resources on each host server.
C. Use Intelligent Placement to place VMs on the host servers that have the highest rating.
D. Configure Performance and Resource Optimization (PRO) Tips.
Answer: CD

Microsoft   70-659   70-659   70-659시험문제

NO.4 A company has a Hyper-V server named SERVER01 that runs Windows Server 2008 R2 Enterprise
with Service Pack (SP) 1. All virtual machines (VMs) run Windows Server 2008 R2 Enterprise with SP1.
All VMs are configured to use Dynamic Memory.
A VM named VM01 is exhibiting performance problems.
You need to ascertain how much memory VM01 is consuming.
What should you do?
A. Use Performance Monitor to view the \Hyper-V Dynamic Memory Balancer\Available Memory
performance counter for SERVER01.
B. Use Performance Monitor to view the \Hyper-V Dynamic Memory VM\Guest Visible Dynamic Memory
performance counter for VM01.
C. In the VM settings, view the Maximum RAM value.
D. Use Performance Monitor to view the \Hyper-V Dynamic Memory VM\Physical Memory performance
counter for VM01.
Answer: A

Microsoft dumps   70-659자료   70-659   70-659   70-659 pdf

NO.5 A company has a Windows Hyper-V Server 2008 R2 failover cluster.
You need to perform a configuration-only export of a virtual machine (VM).
What should you do?
A. In Hyper-V Manager, right-click the VM and select Export.
B. In Hyper-V Manager, rename the VM.
C. Create a custom .exp file with the VM name.
D. Create a PowerShell script that uses the Hyper-V API.
Answer: D

Microsoft자료   70-659 dump   70-659   70-659

NO.6 A company has virtual machine (VMs) running in a 16-node Hyper-V cluster. They are using Microsoft
System Center Virtual Machine Manager (VMM) 2008 R2 to migrate all of their existing VMware VMs to
Hyper-V.
You need to configure VMM to ensure that it places VMs on each host until each host is fully utilized.
What should you do?
A. Configure placement settings for resource maximization.
B. Prioritize resources for memory free.
C. Prioritize resources for disk I/O.
D. Prioritize resources for network utilization.
E. Configure placement settings for load balancing.
Answer: AE

Microsoft dumps   70-659자격증   70-659기출문제

NO.7 A company has a 64-bit server with a quad-core processor. The server runs Windows Hyper-v Server
2008 R2 Service pack(SP) 1. The server will host five virtual machines (VMs) with SP1 integration
services installed. VM1, VM2, and VM3 use the maximum number of logical processors. Resources
allocation for VMs is configured as shown in the following table.
The environment must be configured to meet the following resource allocation requirements:
- VM4 must be able to consume up to half of each processor
- VM5 must not start if VM1, VM2, VM3, and VM4 are running.
- VM4 must use the maximum number of logical processors available on the Hyper-V host
- VM4 must share CPU resources evenly with VM3 during peak usage on the Hyper-V host
You need to configure VM4 to meet the requirements.
How should you configure VM4? (To answer, drag the approbate setting from the list of choices to the
correct locations in the answer area.)
Answer:

NO.8 You manage Hyper-V host servers and virtual machines (VMs) by using Microsoft System Center Virtual
Machine Manager (VMM) 2008 R2. You grant a user the Delegated Administrator user role.
You need to provide the user with the ability to manage VMs through the VMM Self-Service Portal.
What should you do?
A. In VMM, grant the user the Administrator user role.
B. In VMM, grant the user the Self-Service user role.
C. Enable the Single sign-on for Terminal Services option for the VMM Self-Service Portal.
D. Enable the Integrated Windows Authentication option for the VMM Self-Service Portal.
Answer: B

Microsoft   70-659자료   70-659기출문제   70-659덤프   70-659최신덤프

NO.9 You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your Hyper-V
environment.
Failures occur when you perform offline physical-to-virtual (P2V) conversions by using VMM.
You need to ensure that you have the information that is necessary to troubleshoot the problem.
What should you do?
A. Create the x:\Windows\inf\setupapi.dev.log file in Windows PE.
B. Create the scvmm_winpe.etl file on the root of the source computers boot volume
C. Create the scvmm_winpe_setupapi.log file on the root of the source computers boot volume
D. Create the scvmm_enable_winpe_tracing.txt file on the root of the source computers boot volume
Answer: D

Microsoft자료   70-659최신덤프   70-659인증   70-659 dump   70-659   70-659 dumps

NO.10 A company uses Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage their
Hyper-V environment.
A VMM hardware profile is required for the new SQL Server 2008 R2 Enterprise VMs. Based on company
policy, VMs running SQL Server 2008 R2 Enterprise must use Dynamic Memory and the memory
allocation for the VMs must be set to high.
You need to configure a VMM hardware profile so that the memory allocation priority is set to high.
How should you configure the hardware profile? (To answer, select the appropriate node in the answer
area.)
Answer:

NO.11 A company's virtualization environment contains servers that run Windows Server 2008 R2 with
Hyper-V and other servers that run VMware. You manage the Hyper-V environment by using Microsoft
System Center Virtual Machine Manager (VMM) 2008 R2 SP1. You manage the VMware vSphere 4
environment by using VMware vCenter.
You need to manage the VMware hosts by using VMM.
What should you do?
A. Add the vCenter server to VMM.
B. Move the VMware host to a host group.
C. Add a Library Server to VMM.
D. Perform a virtual-to-virtual (V2V) migration of the VMware VMs
Answer: A

Microsoft   70-659자격증   70-659자료   70-659자료   70-659

NO.12 A company has a server that runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2
with Service Pack (SP) 1 and Windows Server 2008 R2 Enterprise with Hyper-V.
The company is preparing to deploy virtual machines (VMs) from templates and has the following
requirements:
- The templates must be created from virtual hard disks (VHDs).
- The templates must include Windows 7.
- An out of the box experience (OOBE) must be provided for all guest operating systems that are
deployed from the templates.
You need to create a template that meets the company requirements.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:

NO.13 You are configuring a virtual environment. The environment includes servers that run either Windows
Server 2003 or Windows Server 2008 R2. You manage the environment by using Microsoft System
Center Virtual Machine Manager (VMM) 2008 R2.
The servers that run Windows Server 2003 do not meet the system requirements to run Windows Server
2008 R2 or Microsoft Hyper-V Server 2008 R2.
You want to host non-production virtual machines (VMS) on the Windows Server 2003 servers.
You need to be able to manage the Windows Server 2003 servers by using VMM.
What should you do?
A. Install Virtual Machine Remote Control Client Plus (VMRCplus) on the Windows Server 2003 host
servers.
B. Stage the Microsoft Virtual Server 2005 R2 software on the VMM server.
C. Stage the Microsoft Virtual Server 2005 software on the VMM server.
D. Add the Windows Server 2003 host servers to VMM by using the Add Hosts wizard.
Answer: D

Microsoft pdf   70-659자격증   70-659 dumps   70-659인증   70-659 dump

NO.14 You have a stand-alone server named SERVER01 that runs Windows Server 2008 R2 Enterprise with
service Pack l and Hyper-V. The server hosts 12 virtual machines (VMs). You add Hyper-V on a new
server named SERVER02. SERVER02 runs Windows Server 2008 R2 Enterprise. One of the VMs on
SERVER01 is configured to use dynamic memory. You export the VM.
The VM cannot be imported on SERVER02. You prepare to export the VM again.
You need to ensure that the exported VM can be imported on SERVER02.
What should you do?
A. Remove all DVD drive media from the VM.
B. Configure the VM to use static memory.
C. Start the VM and allow it to run.
D. Start and then pause the VM.
Answer: B

Microsoft   70-659   70-659   70-659

NO.15 You are configuring a Windows Server 2008 R2 Hyper-V server.
You need to audit changes to Hyper-V roles and authorization rights.
Which file should you audit?
A. AzMan.msc
B. web.config
C. InitialStore.xml
D. machine.config
Answer: C

Microsoft   70-659자격증   70-659

NO.16 You manage your Hyper-V environment by using Microsoft System Center Virtual Machine Manager
(VMM) 2008 R2.
You plan to perform a virtual-to-virtual (V2V) conversion of several virtual machines (VMs).
In VMM, you need to configure the default placement options to consolidate the VMs on the fewest
possible host servers.
What should you do?
A. In the Convert Virtual Machine (V2V) Wizard, set the placement goal to Resource maximization.
B. In Administration view, set the placement goal to Resource maximization.
C. In Administration view, set the placement goal to Load balancing.
D. In the Convert virtual Machine (V2V) Wizard, set the placement goal to Load balancing.
Answer: B

Microsoft dump   70-659덤프   70-659인증

NO.17 A company has a physical Windows 2008 R2 Server that they plan to migrate to a virtual machine
(VM).
You need to document the migration process.
How should you complete the diagram? (To answer drag the appropriate answers from th elist of answer
choices to the correct locations in the diagram (answer area).
Answer:

NO.18 You use Hyper-V server 2008 R2 and failover clustering to host several virtual machines (VMs).
You plan to perform a Volume Shadow Copy (VSS) backup of a Cluster Shared Volume (CSV).
You need to ensure that resources can continue to use the CSV during the VSS backup.
What should you do?
A. Turn on maintenance mode for the CSV.
B. Configure your VSS-aware backup utility as a generic application in failover clustering.
C. Use Failover Cluster Manager to remove dependences from your disk resources.
D. Turn on redirected access for the CSV.
Answer: D

Microsoft기출문제   70-659   70-659   70-659인증

NO.19 You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your
Hyper-Venvironment.
The finance department uses a legacy application that is not supported on Windows Server 2008 R2. The
application runs on a server that has the following configuration:
- Windows 2000 Server operating system
- One 10GB hard disk, FAT formatted
- 512 MB of RAM
You need to ensure that you can perform a physical-to-virtual (P2V) conversion of the server.
What should you do?
A. Run the convert c: /FS: NTFS command on the server.
B. Use offline P2V.
C. Increase the server's RAM to at least 1024 MB.
D. Use online P2V.
Answer: B

Microsoft   70-659   70-659덤프

NO.20 Your company has an Active Directory Domain Services (AD DS) domain that includes an AD security
group named Development.
You have a member server that runs Windows Server 2008 R2 with the Hyper-V role installed.
You need to ensure that Development group members can only manage virtual machines (VMs).
Development group members must not have administrative privileges on the host server.
What should you use.?
A. Authorization Manager
B. the net localgroup command
C. Local Users and Groups
D. Active Directory Administrative Center
Answer: A

Microsoft자격증   70-659   70-659   70-659 pdf

ITexamdump의 1z0-593덤프의 VCE테스트프로그램과 70-321덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-462시험에 대비한 고품질 덤프와 C_HANATEC_1시험 최신버전덤프를 제공해드립니다. 최고품질 MSC-431시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-659.html

70-516 덤프 Microsoft 인증 시험

ITExamDump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는Microsoft 70-516시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ITExamDump에서는 무료로 24시간 온라인상담이 있으며, ITExamDump의 덤프로Microsoft 70-516시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.

최근 Microsoft인증 70-516시험이 IT업계에서 제일 높은 인지도를 가지고 있습니다.바라만 보지 마시고Microsoft인증 70-516시험에 도전해보세요. ITExamDump 의 Microsoft인증 70-516덤프로 시험준비공부를 하시면 한방에 시험패스 가능합니다. Microsoft인증 70-516덤프로 자격증취득에 가까워지고 나아가서는 IT업계에서 인정을 받는 열쇠를 소유한것과 같다고 할수 있습니다.

만약ITExamDump를 선택하였다면 여러분은 반은 성공한 것입니다. 여러분은 아주 빠르게 안전하게 또 쉽게Microsoft 70-516인증시험 자격증을 취득하실 수 있습니다. 우리ITExamDump에서 제공되는 모든 덤프들은 모두 100%보장 도를 자랑하며 그리고 우리는 일년무료 업데이트를 제공합니다.

시험 번호/코드: 70-516
시험 이름: Microsoft (TS: Accessing Data with Microsoft .NET Framework 4)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 196 문항
업데이트: 2014-02-27

만약 여러분은Microsoft 70-516인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만Microsoft 70-516패스는 쉬운 일은 아닙니다.Microsoft 70-516패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.

ITExamDump의 연구팀에서는Microsoft 70-516인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드Microsoft 70-516덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에Microsoft 70-516이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이Microsoft 70-516시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.

Microsoft인증 70-516시험은 등록하였는데 시험준비는 아직이라구요? Microsoft인증 70-516시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의Microsoft인증 70-516덤프와의 근사한 만남이Microsoft인증 70-516패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의Microsoft인증 70-516덤프로 시험패스에 고고싱하세요.

70-516 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-516.html

NO.1 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
You use the ADO.NET Entity Framework to model entities. You write the following code segment. (Line
numbers are included for reference only.)
01 AdventureWorksEntities context = new
AdventureWorksEntities("http://localhost:1234/AdventureWorks.svc");
02 ...
03 var q = from c in context.Customers
04 where c.City == "London"
05 orderby c.CompanyName
06 select c;
You need to ensure that the application meets the following requirements:
Compares the current values of unmodified properties with values returned from the data source.
Marks the property as modified when the properties are not the same.
Which code segment should you insert at line 02?
A. context.MergeOption = MergeOption.AppendOnly;
B. context.MergeOption = MergeOption.PreserveChanges;
C. context.MergeOption = MergeOption.OverwriteChanges;
D. context.MergeOption = MergeOption.NoTracking;
Answer: B

Microsoft   70-516덤프   70-516 dumps   70-516덤프

NO.2 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application uses the ADO.NET Entity Framework to manage Plain Old CLR Objects (POCO) entities.
You create a new POCO class. You need to ensure that the class meets the following requirements:
It can be used by an ObjectContext.
It is enabled for change-tracking proxies.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Modify each mapped property to contain sealed and protected accessors.
B. Modify each mapped property to contain non-sealed, public, and virtual accessors.
C. Configure the navigation property to return a type that implements the ICollection interface.
D. Configure the navigation property to return a type that implements the IQueryable interface.
E. Configure the navigation property to return a type that implements the IEntityWithRelationships
interface.
Answer: BC

Microsoft dump   70-516   70-516

NO.3 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database.
The application has two DataTable objects that reference the Customers and Orders tables in the
database.
The application contains the following code segment. (Line numbers are included for reference only.)
01 DataSet customerOrders = new DataSet();
02 customerOrders.EnforceConstraints = true;
03 ForeignKeyConstraint ordersFK = new ForeignKeyConstraint("ordersFK",
04
customerOrders.Tables["Customers"].Columns["CustomerID"],
05 customerOrders.Tables["Orders"].Columns["CustomerID"]);
06 ...
07 customerOrders.Tables["Orders"].Constraints.Add(ordersFK);
You need to ensure that an exception is thrown when you attempt to delete Customer records that have
related Order records.
Which code segment should you insert at line 06?
A. ordersFK.DeleteRule = Rule.SetDefault;
B. ordersFK.DeleteRule = Rule.None;
C. ordersFK.DeleteRule = Rule.SetNull;
D. ordersFK.DeleteRule = Rule.Cascade;
Answer: B

Microsoft최신덤프   70-516   70-516   70-516   70-516   70-516 pdf

NO.4 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database and contains a LINQ to SQL data model.
The data model contains a function named createCustomer that calls a stored procedure.
The stored procedure is also named createCustomer. The createCustomer function has the following
signature.
createCustomer (Guid customerID, String customerName, String address1)
The application contains the following code segment. (Line numbers are included for reference only.)
01 CustomDataContext context = new CustomDataContext();
02 Guid userID = Guid.NewGuid();
03 String address1 = "1 Main Steet";
04 String name = "Marc";
05 ...
You need to use the createCustomer stored procedure to add a customer to the database.
Which code segment should you insert at line 05?
A. context.createCustomer(userID, customer1, address1);
B. context.ExecuteCommand("createCustomer", userID, customer1, address1);
Customer customer = new Customer() { ID = userID, Address1 = address1, Name = customer1, };
C. context.ExecuteCommand("createCustomer", customer);
Customer customer = new Customer() { ID = userID, Address1 = address1, Name = customer1, };
D. context.ExecuteQuery(typeof(Customer), "createCustomer", customer);
Answer: A

Microsoft   70-516인증   70-516시험문제   70-516

NO.5 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
You use the ADO.NET Entity Framework to model entities. You write the following code segment. (Line
numbers are included for reference only.)
01 public partial class SalesOrderDetail : EntityObject
02 {
03 partial void OnOrderQtyChanging(short value)
04 {
05 ...
06 {
07 ...
08 }
09 }
10 }
You need to find out whether the object has a valid ObjectStateEntry instance. Which code segment
should you insert at line 05?
A. if (this.EntityState != EntityState.Detached)
B. if (this.EntityState != EntityState.Unchanged)
C. if (this.EntityState != EntityState.Modified)
D. if (this.EntityState != EntityState.Added)
Answer: D

Microsoft   70-516 dump   70-516

NO.6 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server 2008 database. The database includes a table
named dbo.Documents
that contains a column with large binary data. You are creating the Data Access Layer (DAL).
You add the following code segment to query the dbo.Documents table. (Line numbers are included for
reference only.)
01 public void LoadDocuments(DbConnection cnx)
02 {
03 var cmd = cnx.CreateCommand();
04 cmd.CommandText = "SELECT * FROM dbo.Documents";
05 ...
06 cnx.Open();
07 ...
08 ReadDocument(reader);
09 }
You need to ensure that data can be read as a stream. Which code segment should you insert at line 07?
A. var reader = cmd.ExecuteReader(CommandBehavior.Default);
B. var reader = cmd.ExecuteReader(CommandBehavior.SchemaOnly);
C. var reader = cmd.ExecuteReader(CommandBehavior.KeyInfo);
D. var reader = cmd.ExecuteReader(CommandBehavior.SequentialAccess);
Answer: D

Microsoft최신덤프   70-516기출문제   70-516자격증   70-516 dump

NO.7 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server 2008 database.
You use the ADO.NET Entity Framework to model your entities. You use ADO.NET self-tracking entities.
You need to ensure that the change-tracking information for the self-tracking entities can be used to
update the database.
Which ObjectContext method should you call after changes are made to the entities?
A. Attach
B. Refresh
C. SaveChanges
D. ApplyChanges
Answer: D

Microsoft   70-516   70-516

NO.8 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database.
The application uses a DataTable named OrderDetailTable that has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
Some records contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 DataColumn column = new DataColumn("UnitPrice", typeof(double));
02 ...
03 OrderDetailTable.Columns.Add(column);
You need to add a calculated DataColumn named UnitPrice to the OrderDetailTable object.
You also need to ensure that UnitPrice is set to 0 when it cannot be calculated.
Which code segment should you insert at line 02?
A. column.Expression = "LineTotal/Quantity";
B. column.Expression = "LineTotal/ISNULL(Quantity, 1)";
C. column.Expression = "if(Quantity > 0, LineTotal/Quantity, 0)";
D. column.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)";
Answer: D

Microsoft   70-516   70-516   70-516

NO.9 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create a Windows Forms
application.
You plan to deploy the application to several shared client computers. You write the following code
segment.
(Line numbers are included for reference only.)
01 Configuration config = ConfigurationManager.OpenExeConfiguration(exeConfigName);
02 ...
03 config.Save();
04 ...
You need to encrypt the connection string stored in the .config file.
Which code segment should you insert at line 02.?
A. ConnectionStringsSection section = config.GetSection("connectionString") as
ConnectionStringsSection;
section.SectionInformation.ProtectSection("DataProtectionConfigurationProvider");
B. ConnectionStringsSection section = config.GetSection("connectionStrings") as
ConnectionStringsSection;
section.SectionInformation.ProtectSection("DataProtectionConfigurationProvider");
C. ConnectionStringsSection section = config.GetSection("connectionString") as
ConnectionStringsSection;
section.SectionInformation.ProtectSection("RsaProtectedConfigurationProvider");
D. ConnectionStringsSection section = config.GetSection("connectionStrings") as
ConnectionStringsSection;
section.SectionInformation.ProtectSection("RsaProtectedConfigurationProvider");
Answer: D

Microsoft   70-516기출문제   70-516   70-516

NO.10 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database.
You use the ADO.NET Entity Framework to manage persistence-ignorant entities. You create an
ObjectContext instance named context.
Then, you directly modify properties on several entities. You need to save the modified entity values to the
database.
Which code segment should you use?
A. context.SaveChanges(SaveOptions.AcceptAllChangesAfterSave);
B. context.SaveChanges(SaveOptions.DetectChangesBeforeSave);
C. context.SaveChanges(SaveOptions.None);
D. context.SaveChanges();
Answer: B

Microsoft시험문제   70-516덤프   70-516덤프   70-516   70-516 dumps

NO.11 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create a Windows
Communication Foundation (WCF) Data Services service.
The service connects to a Microsoft SQL Server 2008 database. The service is hosted by an Internet
Information Services (IIS) 6.0 Web server.
The application works correctly in the development environment. However, when you connect to the
service on
the production server, attempting to update or delete an entity results in an error.
You need to ensure that you can update and delete entities on the production server. What should you
do?
A. Add the following line of code to the InitializeService method of the service:
config.SetEntitySetAccessRule ("*", EntitySetRights.WriteDelete | EntitySetRights.WriteInsert);
B. Add the following line of code to the InitializeService method of the service:
config.SetEntitySetAccessRule ("*", EntitySetRights.WriteDelete | EntitySetRights.WriteMerge);
C. Configure IIS to allow the PUT and DELETE verbs for the .svc Application Extension.
D. Configure IIS to allow the POST and DELETE verbs for the .svc Application Extension.
Answer: C

Microsoft   70-516 dumps   70-516   70-516

NO.12 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database. The application uses the ADO.NET Entity
Framework to model entities.
The database includes objects based on the exhibit.
The application includes the following code segment. (Line numbers are included for reference only.)
01 using (AdventureWorksEntities context = new AdventureWorksEntities()){
02 ...
03 foreach (SalesOrderHeader order in customer.SalesOrderHeader){
04 Console.WriteLine(String.Format("Order: {0} ", order.SalesOrderNumber));
05 foreach (SalesOrderDetail item in order.SalesOrderDetail){
06 Console.WriteLine(String.Format("Quantity: {0} ", item.Quantity));
07 Console.WriteLine(String.Format("Product: {0} ", item.Product.Name));
08 }
09 }
10 }
You want to list all the orders for a specified customer. You need to ensure that the list contains the
following fields:
Order number
Quantity of products
Product name
Which code segment should you insert at line 02?
A. Contact customer = context.Contact.Where("it.ContactID = @customerId", new
ObjectParameter("@customerId", customerId)).First();
B. Contact customer = context.Contact.Where("it.ContactID = @customerId", new
ObjectParameter("customerId", customerId)).First();
C. context.ContextOptions.LazyLoadingEnabled = true;
Contact customer = (from contact in context.Contact
include("SalesOrderHeader.SalesOrderDetail")
select conatct).FirstOrDefault();
D. Contact customer = (from contact in context.Contact
include("SalesOrderHeader")
select conatct).FirstOrDefault();
Answer: B

Microsoft   70-516   70-516   70-516   70-516 pdf

NO.13 }
You need to ensure that the Product data for each Category object is lazy-loaded. What should you do?
A. Add the following code segment at line 06:
ctx.LoadProperty(category, "Products");
B. Add the following code segment at line 08:
ctx.LoadProperty(product, "*");
C. Add the following code segment at line 06:
var strPrdUri = string.Format("Categories({0})?$expand=Products", category.CategoryID);
var productUri = new Uri(strPrdUri, UriKind.Relative);
ctx.Execute<Product>(productUri);
D. Add the following code segment at line 08:
var strprdUri= string.format("Products?$filter=CategoryID eq {0}", category.CategoryID);
var prodcutUri = new Uri(strPrd, UriKind.Relative);
ctx.Execute<Product>(productUri);
Answer: A

Microsoft dump   70-516   70-516최신덤프   70-516최신덤프
11.You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database. You load records from the Customers table
into a DataSet object named dataset.
You need to retrieve the value of the City field from the first and last records in the Customers table.
Which code segment should you use?
A. DataTable dt = dataset.Tables["Customers"];
string first = dt.Rows[0]["City"].ToString();
string last = dt.Rows[dt.Rows.Count - 1]["City"].ToString();
B. DataTable dt = dataset.Tables["Customers"];
string first = dt.Rows[0]["City"].ToString();
string last = dt.Rows[dt.Rows.Count]["City"].ToString();
C. DataRelation relationFirst = dataset.Relations[0];
DataRelation relationLast = dataset.Relations[dataset.Relations.Count - 1];
string first = relationFirst.childTable.Columns["City"].ToString();
string last = relationLast.childTable.Columns["City"].ToString();
D. DataRelation relationFirst = dataset.Relations[0];
DataRelation relationLast = dataset.Relations[dataset.Relations.Count];
string first = relationFirst.childTable.Columns["City"].ToString();
string last = relationLast.childTable.Columns["City"].ToString();
Answer: A

Microsoft자료   70-516   70-516   70-516

NO.14 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create a Windows
Communication
Foundation (WCF) Data Services service. You deploy the data service to the following URL:
http://contoso.com/Northwind.svc.
You add the following code segment. (Line numbers are included for reference only.)
01 var uri = new Uri(@"http://contoso.com/Northwind.svc/");
02 var ctx = new NorthwindEntities(uri);
03 var categories = from c in ctx.Categories select c;
04 foreach (var category in categories) {
05 PrintCategory(category);
06 ...
07 foreach (var product in category.Products) {
08 ...
09 PrintProduct(product);
10 }

NO.15 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database.
The application uses the ADO.NET LINQ to SQL model to retrieve data from the database.
The application will not modify retrieved data. You need to ensure that all the requested data is retrieved.
You want to achieve this goal using the minimum amount of resources. What should you do?
A. Set ObjectTrackingEnabled to true on the DataContext class.
B. Set ObjectTrackingEnabled to false on the DataContext class.
C. Set DeferredLoadingEnabled to true on the DataContext class.
D. Set DeferredLoadingEnabled to false on the DataContext class.
Answer: B

Microsoft dump   70-516자료   70-516인증   70-516덤프   70-516덤프

NO.16 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database. You create a DataSet object in the
application.
You add two DataTable objects named App_Products and App_Categories to the DataSet.
You add the following code segment to populate the DataSet object.
(Line numbers are included for reference only.)
01 public void Fill(SqlConnection cnx, DataSet ds)
02 {
03 var cmd = cnx.CreateCommand();
04 cmd.CommandText = "SELECT * FROM dbo.Products; " + "SELECT * FROM dbo.Categories";
05 var adapter = new SqlDataAdapter(cmd);
06 ...
07 }
You need to ensure that App_Products and App_Categories are populated from the dbo.Products and
dbo.Categories database tables.
Which code segment should you insert at line 06?
A. adapter.Fill(ds, "Products");
adapter.Fill(ds, "Categories");
B. adapter.Fill(ds.Tables["App_Products"]);
adapter.Fill(ds.Tables["App_Categories"]);
C. adapter.TableMappings.Add("Table", "App_Products");
adapter.TableMappings.Add("Table1", "App_Categories");
adapter.Fill(ds);
D. adapter.TableMappings.Add("Products", "App_Products");
adapter.TableMappings.Add("Categories", "App_Categories");
adapter.Fill(ds);
Answer: D

Microsoft dump   70-516   70-516시험문제   70-516자격증

NO.17 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
You use the ADO.NET Entity Data Model (EDM) to define a Customer entity.
You need to add a new Customer to the data store without setting all the customer's properties. What
should you do?
A. Call the Create method of the Customer object.
B. Call the CreateObject method of the Customer object.
C. Override the Create method for the Customer object.
D. Override the SaveChanges method for the Customer object.
Answer: B

Microsoft   70-516인증   70-516 dumps   70-516최신덤프

NO.18 You use Microsoft Visual Studio 2010, Microsoft Sync Framework, and Microsoft .NET Framework 4.0
to create an application.
You have a ServerSyncProvider connected to a Microsoft SQL Server database. The database is hosted
on a Web server.
Users will use the Internet to access the Customer database through the ServerSyncProvider.
You write the following code segment. (Line numbers are included for reference only.)
01 SyncTable customerSyncTable = new SyncTable("Customer");
02 customerSyncTable.CreationOption = TableCreationOption.UploadExistingOrCreateNewTable;
03 ...
04 customerSyncTable.SyncGroup = customerSyncGroup;
05 this.Configuration.SyncTables.Add(customerSyncTable);
You need to ensure that the application meets the following requirements:
Users can modify data locally and receive changes from the server.
Only changed rows are transferred during synchronization.
Which code segment should you insert at line 03?
A. customerSyncTable.SyncDirection = SyncDirection.DownloadOnly;
B. customerSyncTable.SyncDirection = SyncDirection.Snapshot;
C. customerSyncTable.SyncDirection = SyncDirection.Bidirectional;
D. customerSyncTable.SyncDirection = SyncDirection.UploadOnly;
Answer: C

Microsoft   70-516   70-516 pdf   70-516   70-516

NO.19 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application uses the ADO.NET Entity Framework to model entities.
The application allows users to make changes while disconnected from the data store.
Changes are submitted to the data store by using the SubmitChanges method of the DataContext object.
You receive an exception when you call the SubmitChanges method to submit entities that a user has
changed in offline mode.
You need to ensure that entities changed in offline mode can be successfully updated in the data store.
What should you do?
A. Set the ObjectTrackingEnabled property of DataContext to true.
B. Set the DeferredLoadingEnabled property of DataContext to true.
C. Call the SaveChanges method of DataContext with a value of false.
D. Call the SubmitChanges method of DataContext with a value of
System.Data.Linq.ConflictMode.ContinueOnConflict.
Answer: A

Microsoft시험문제   70-516   70-516

NO.20 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application uses the ADO.NET Entity Framework to model entities.
You define a Category class by writing the following code segment. (Line numbers are included for
reference only.)
01 public class Category
02 {
03 public int CategoryID { get; set; }
04 public string CategoryName { get; set; }
05 public string Description { get; set; }
06 public byte[] Picture { get; set; }
07 ...
08 }
You need to add a collection named Products to the Category class. You also need to ensure that the
collection supports deferred loading.
Which code segment should you insert at line 07?
A. public static List <Product> Products { get; set; }
B. public virtual List <Product> Products { get; set; }
C. public abstract List <Product> Products { get; set; }
D. protected List <Product> Products { get; set; }
Answer: B

Microsoft   70-516 pdf   70-516

ITexamdump의 646-048덤프의 VCE테스트프로그램과 C_FSUTIL_60덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-663시험에 대비한 고품질 덤프와 70-492시험 최신버전덤프를 제공해드립니다. 최고품질 DC0-260시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-516.html

Microsoft 자격증 70-506 시험문제와 답

ITExamDump의Microsoft인증 70-506 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. Microsoft인증 70-506덤프로Microsoft인증 70-506시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. Microsoft인증 70-506덤프는 실제Microsoft인증 70-506시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.

70-506인증시험은Microsoft사의 인중시험입니다.Microsoft인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이Microsoft인증70-506시험을 응시합니다.하지만 실질적으로70-506시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.

Microsoft 70-506인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면Microsoft 70-506인증시험이 아주 좋은 자격증입니다. 만약Microsoft 70-506인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.

ITExamDump에서는Microsoft 인증70-506시험대비덤프를 발췌하여 제공해드립니다. Microsoft 인증70-506시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인Microsoft 인증70-506시험대비덤프로Microsoft 인증70-506시험준비공부를 해보세요. 통과율이 100%입니다.

ITExamDump의 Microsoft인증 70-506덤프는 최근 유행인 PDF버전과 소프트웨어버전 두가지 버전으로 제공됩니다.PDF버전을 먼저 공부하고 소프트웨어번으로 PDF버전의 내용을 얼마나 기억하였는지 테스트할수 있습니다. 두 버전을 모두 구입하시면 시험에서 고득점으로 패스가능합니다.

시험 번호/코드: 70-506
시험 이름: Microsoft (Microsoft Silverlight 4, Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 153 문항
업데이트: 2014-02-27

ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Microsoft인증70-506시험을 패스할 수 있을 자료 등을 만들었습니다, ITExamDump 에서는 일년무료 업뎃을 제공하며, ITExamDump 의 덤프들은 모두 높은 정확도를 자랑합니다. ITExamDump 선택함으로 여러분이Microsoft인증70-506시험에 대한 부담은 사라질 것입니다.

Microsoft인증70-506시험은 IT인증시험과목중 가장 인기있는 시험입니다. ITExamDump에서는Microsoft인증70-506시험에 대비한 공부가이드를 발췌하여 IT인사들의 시험공부 고민을 덜어드립니다. ITExamDump에서 발췌한 Microsoft인증70-506덤프는 실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험준비 공부의 완벽한 선택입니다.

70-506 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-506.html

NO.1 }
You attempt to run the application. You receive the following error message:
"Invalid crossthread access."
You need to ensure that worker executes successfully.
What should you do?
A. Replace line 11 with the following code segment.
var b = (bool )checkBox.GetValue(CheckBox.IsCheckedProperty)
bool isChecked = b.HasValue && b.Value
B. Replace line 11 with the following code segment.
bool isChecked = false
Dispatcher.BeginInvoke(() =>
{
isChecked = checkBox.IsChecked.HasValue && checkBox.IsChecked.Value
})
C. Replace line 18 with the following code segment.
statusTextBlock.SetValue(TextBlock.TextProperty, e.ProgressPercentage + "%")
D. Replace line 18 with the following code segment.
Dispatcher.BeginInvoke(() =>
{
statusTextBlock.Text = e.ProgressPercentage + "%"
})
Answer: B

Microsoft   70-506 dumps   70-506   70-506   70-506
13.You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 public class MyControl : Control
02 {
03
04 public string Title
05 {
06 get { return (string)GetValue(TitleProperty)
}
07 set { SetValue(TitleProperty, value)
}
08 }
09 }
You need to create a dependency property named TitleProperty that allows developers to set the Title.
You also need to ensure that the default value of the TitleProperty dependency property is set to Untitled.
Which code segment you add at line 03?
A. public static readonly DependencyProperty TitleProperty =
DependencyProperty.Register("Untitled",
typeof(string),
typeof(MyControl),
null)
B. public static readonly DependencyProperty TitleProperty =
DependencyProperty.Register("Untitled",
typeof(string),
typeof(MyControl),
new PropertyMetadata("Title"))
C. public static readonly DependencyProperty TitleProperty =
DependencyProperty.Register("Title",
typeof(string),
typeof(MyControl),
new PropertyMetadata("Untitled"))
D. public static readonly DependencyProperty TitleProperty =
DependencyProperty.Register("Title",
typeof(string),
typeof(MyControl),
new PropertyMetadata(new PropertyChangedCallback((depObj, args) =>
{
depObj.SetValue(MyControl.TitleProperty, "Untitled")
})))
Answer: C

Microsoft   70-506기출문제   70-506   70-506기출문제   70-506
14.You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You create a control named MyControl in the application. Each instance of the control contains a list of
FrameworkElement objects.
You add the following code segment. (Line numbers are included for reference only.)
01 public class MyControl : Control
02 {
03
04 public List<FrameworkElement> ChildElements
05 {
06 get {
07 return List<FrameworkElement>)GetValue(MyControl.ChildElementsProperty)
08 }
09 }
10
11 public MyControl()
12 {
13
14 }
15 static MyControl()
16 {
17
18 }
19 }
You need to create the ChildElementsProperty dependency property. You also need to initialize the
property by using an empty list of FrameworkElement objects.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following code segment at line 03.
public static readonly DependencyProperty ChildElementsProperty =
DependencyProperty.Register("ChildElements", typeof(List<FrameworkElement>), typeof(MyControl),
new PropertyMetadata(new List<FrameworkElement>()))
B. Add the following code segment at line 03.
public static readonly DependencyProperty ChildElementsProperty =
DependencyProperty.Register("ChildElements", typeof(List<FrameworkElement>), typeof(MyControl),
new PropertyMetadata(null))
C. Add the following code segment at line 13.
SetValue(MyControl.ChildElementsProperty, new List<FrameworkElement>())
D. Add the following code segment at line 17.
ChildElementsProperty =
DependencyProperty.Register("ChildElements", typeof(List<FrameworkElement>), typeof(MyControl),
new PropertyMetadata(new List<FrameworkElement>()))
Answer: B, C

Microsoft   70-506덤프   70-506   70-506
15.You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 var outerCanvas = new Canvas()
02 var innerCanvas = new Canvas()
03 innerCanvas.Width = 200
04 innerCanvas.Height = 200
05 outerCanvas.Children.Add(innerCanvas)
06
You need to set the distance between the left of the innerCanvas element and the left of the outerCanvas
element to 150 pixels.
Which code segment should you add at line 06?
A. outerCanvas.Margin = new Thickness(0.0, 150.0, 0.0, 0.0)
B. innerCanvas.Margin = new Thickness(0.0, 150.0, 0.0, 0.0)
C. outerCanvas.SetValue(Canvas.LeftProperty, 150.0)
D. innerCanvas.SetValue(Canvas.LeftProperty, 150.0)
Answer: D

Microsoft인증   70-506   70-506 dumps   70-506   70-506덤프
16.You are developing a Silverlight 4 application. The application contains a Product class that has a
public Boolean property named IsAvailable.
You need to create a value converter that binds data to the Visibility property of a Button control.
Which code segment should you use?
A. public class BoolToVisibilityConverter : IValueConverter
{
public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo
culture)
{
bool result = System.Convert.ToBoolean(parameter)
return result Visibility.Visible : Visibility.Collapsed
}
public object ConvertBack(object value, Type targetType, object parameter,
System.Globalization.CultureInfo culture)
{
throw new NotImplementedException()
}
}
B. public class BoolToVisibilityConverter : IValueConverter
{
public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo
culture)
{
bool result = System.Convert.ToBoolean(value)
return result Visibility.Visible : Visibility.Collapsed
}
public object ConvertBack(object value, Type targetType, object parameter,
System.Globalization.CultureInfo culture)
{
throw new NotImplementedException()
}
}
C. public class BoolToVisibilityConverter : PropertyPathConverter
{
public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo
culture)
{
return this.ConvertTo(value, typeof(Visibility))
}
public object ConvertBack(object value, Type targetType, object parameter,
System.Globalization.CultureInfo culture)
{
throw new NotImplementedException()
}
}
D. public class BoolToVisibilityConverter
{
public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo
culture)
{
bool result = System.Convert.ToBoolean(value)
return result Visibility. Visible : Visibility. Collapsed
}
public object ConvertBack(object value, Type targetType, object parameter,
System.Globalization.CultureInfo culture)
{
throw new NotImplementedException()
}
}
Answer: B

Microsoft   70-506 dumps   70-506자료   70-506   70-506   70-506자료
17.You are developing a Silverlight 4 application. The application contains a Product class that has a
public string property named Name.
You create a TextBox control by using the following XAML fragment.
<TextBox Text="{Binding Name, ValidatesOnDataErrors=True}" />
You need to ensure that validation errors are reported to the user interface. You also need to ensure that
a validation error will occur when the TextBox control is empty.
Which code segment should you use?
A. public class Product
{
[Required()]
public string Name { get
set
}
}
B. public class Product : IDataErrorInfo
{
public string Name { get
set
}
public string Error { get { return null
} }
public string this[string columnName]
{
get
{
if (columnName == "Name" && string.IsNullOrEmpty(Name))
{
throw new ValidationException("Name should not be empty!")
}
return string.Empty
}
}
}
C. public class Product : IDataErrorInfo
{
public string Name { get
set
}
public string Error { get { return null
} }
public string this[string columnName]
{
get
{
if (columnName == "Name" && string.IsNullOrEmpty(Name))
{
return "Name should not be empty!"
}
return string.Empty
}
}
}
D. public class Product
{
private string _name
public string Name
{
get { return _name
}
set
{
if (string.IsNullOrEmpty(value))
throw new ValidationException("Name should not be empty!")
_name = value
}
}
}
Answer: C

Microsoft   70-506 pdf   70-506   70-506
18.You are developing a ticketing application by using Silverlight 4. You have a listbox named lstTickets
that contains a list of the tickets. The page contains a button that allows the user to print the tickets. The
PrintView UserControl binds to the type in lstTickets and is designed to fit a standard sheet of paper.
You add the following code segment to the button event handler. (Line numbers are included for
reference only.)
01 var doc = new PrintDocument()
02 var view = new PrintView()
03 doc.PrintPage += (s, args) =>
04 {
05 var ppc = doc.PrintedPageCount
06 if (ppc < lstTickets.Items.Count)
07 {
08 var data = lstTickets.Items[ppc]
09 view.DataContext = data
10 args.PageVisual = view
11
12
13 }
14 }
15 doc.Print("tickets")
You need to use the Silverlight printing API to print each ticket on its own page. You also need to ensure
that all tickets in the listbox are printed.
Which code segment should you insert at lines 11 and 12?
A. if (args.HasMorePages == false)
return
B. if (args.HasMorePages == true)
return
C. if (doc.PrintedPageCount < this.lstTickets.Items.Count 1)
args.HasMorePages = true
D. if (ppc == this.lstTickets.Items.Count 1)
doc.EndPrint += (o, p) => { return
}
Answer: C

Microsoft시험문제   70-506인증   70-506   70-506시험문제   70-506   70-506 dump
19.You are developing an outofbrowser
application by using Silverlight 4.
The main page of the application contains the following code segment.
public MainPage()
{
InitializeComponent()
NetworkChange.NetworkAddressChanged += (s, e) => CheckNetworkStatusAndRaiseToast()
CheckNetworkStatusAndRaiseToast()
}
You need to ensure that the application will raise a toast notification when network connectivity changes.
Which two actions should you perform in the CheckNetworkStatusAndRaiseToast method? (Each correct
answer presents part of the solution. Choose two.)
A. Verify that App.Current.IsRunningOutOfBrowser is true.
B. Verify that App.Current.IsRunningOutOfBrowser is false.
C. Verify that App.Current.HasElevatedPermissions is true.
D. Verify that App.Current.HasElevatedPermissions is false.
E. Examine NetworkInterface.GetIsNetworkAvailable().
F. Call App.Current.CheckAndDownloadUpdateAsync() in a try/catch block.
Answer: A, E

Microsoft덤프   70-506인증   70-506시험문제

NO.2 statusTextBlock.Text = e.ProgressPercentage + "%"

NO.3 You are developing a Silverlight 4 application.
The application defines the following three event handlers. (Line numbers are included for reference
only.)
01 private void HandleCheck(object sender, RoutedEventArgs e)
02 {
03 MessageBox.Show("Checked")
04 }
05
06 private void HandleUnchecked(object sender, RoutedEventArgs e)
07 {
08 MessageBox.Show("Unchecked")
09 }
10
11 private void HandleThirdState(object sender, RoutedEventArgs e)
12 {
13 MessageBox.Show("Indeterminate")
14 }
You need to allow a check box that can be selected, cleared, or set to Indeterminate. You also need to
ensure that the event handlers are invoked when the user changes the state of the control.
Which XAML fragment should you use?
A. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsChecked="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
B. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsThreeState="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
C. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsHitTestVisible="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
D. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsEnabled="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
Answer: B

Microsoft   70-506   70-506 pdf

NO.4 You are developing a Silverlight 4 application. You define the visual behavior of a custom control in the
ControlTemplate by defining a VisualState object named Selected.
You need to change the visual state of the custom control to the Selected state.
Which code segment or XAML fragment should you use?
A. VisualStateManager.GoToState( this, "Selected", true )
B. <VisualTransition To="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
C. <VisualTransition From="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
D. public static readonly DependencyProperty SelectedProperty =
DependencyProperty.Register("Selected", typeof(VisualState), typeof(MyControl), null)
public VisualState Selected
{
get { return (VisualState)GetValue(SelectedProperty)
}
set { SetValue(SelectedProperty, value)
}
}
Answer: A

Microsoft인증   70-506자격증   70-506   70-506   70-506자격증

NO.5 You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You add a BackgroundWorker object named worker to the application.
You add the following code segment. (Line numbers are included for reference only.)
01 public MainPage()
02 {
03 InitializeComponent()
04 worker.WorkerSupportsCancellation = true
05 worker.DoWork += new DoWorkEventHandler(worker_DoWork)
06 worker.RunWorkerCompleted += new RunWorkerCompletedEventHandler(worker_Completed)
07 }
08 private void worker_DoWork(object sender, DoWorkEventArgs e)
09 {
10 for (int i = 0
i < 100
i++) {
11 InvokeLongRunningProcessStep()

NO.6 }
You need to ensure that worker can be properly canceled.
Which code segment should you use to replace line 11?
A. var cancel = (sender as BackgroundWorker).CancellationPending
if(cancel) {
(sender as BackgroundWorker).CancelAsync()
break
}
else {
InvokeLongRunningProcessStep()
}
B. var cancel = (sender as BackgroundWorker).CancellationPending
if(cancel) {
e.Cancel = true
break
}
else {
InvokeLongRunningProcessStep()
}
C. var cancel = e.Cancel
if(cancel) {
(sender as BackgroundWorker).CancelAsync()
break
}
else {
InvokeLongRunningProcessStep()
}
D. var cancel = e.Cancel
if(cancel) {
e.Cancel = true
break
}
else {
InvokeLongRunningProcessStep()
}
Answer: B

Microsoft시험문제   70-506   70-506   70-506최신덤프
12.You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You add a BackgroundWorker object named worker to the application. You also add a CheckBox control
named checkBox and a TextBlock control named statusTextBlock.
You add the following code segment. (Line numbers are included for reference only.)
01 public MainPage()
02 {
03 InitializeComponent()
04 worker.WorkerReportsProgress = true
05 worker.DoWork += new DoWorkEventHandler(worker_DoWork)
06 worker.ProgressChanged += new ProgressChangedEventHandler(worker_ProgressChanged)
07 }
08 private void worker_DoWork(object sender, DoWorkEventArgs e)
09 {
10 for (int i = 0
i < 100
i++) {
11 bool isChecked = checkBox.IsChecked.HasValue && checkBox.IsChecked.Value
12 ExecuteLongRunningProcessStep(isChecked)
13 worker.ReportProgress(i)

NO.7 You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You create a Windows Communication Foundation (WCF) Data Service. You add a service reference to
the WCF Data Service named NorthwindEntities in the Silverlight application. You also add a
CollectionViewSource object named ordersViewSource in the Silverlight application.
You add the following code segment. (Line numbers are included for reference only.)
01 void getOrders_Click(object sender, RoutedEventArgs e)
02 {
03 var context = new NorthwindEntities()
04
05 var query = from order in context.Orders
06 select order
07
08 }
You need to retrieve the Orders data from the WCF Data Service and bind the data to the
ordersViewSource object.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following code segment at line 04.
var obsCollection = new ObservableCollection<Order>()
B. Add the following code segment at line 04.
var dsOrders = new DataServiceCollection<Order>()
dsOrders.LoadCompleted += new EventHandler<LoadCompletedEventArgs>(
(dsc, args) =>
{
ordersViewSource.Source = dsOrders
})
C. Add the following code segment at line 07.
dsOrders.LoadAsync(query)
D. Add the following code segment at line 07.
dsOrders.Load(query)
E. Add the following code segment at line 07.
query.ToList().ForEach(o => obsCollection.Add(o))
ordersViewSource.Source = obsCollection
Answer: B, C

Microsoft시험문제   70-506   70-506

NO.8 {

NO.9 }

NO.10 You have a Silverlight 4 application that uses isolated storage. You create an application that has a 5
MB file that must be saved to isolated storage.
Currently, the application has not allocated enough isolated storage to save the file.
You need to ensure that the application prompts the user to increase the isolated storage allocation. You
also need to ensure that only the minimum amount of space needed to save the 5 MB file is requested.
Which code segment should you use?
A. using (var store = IsolatedStorageFile.GetUserStoreForApplication())
{
var neededSpace = 5242880
if (store.IncreaseQuotaTo(neededSpace))
{
...
}
}
B. using (var store = IsolatedStorageFile.GetUserStoreForApplication())
{
var neededSpace = 5242880
if (store.IncreaseQuotaTo(store.Quota + neededSpace))
{
...
}
}
C. using (var store = IsolatedStorageFile.GetUserStoreForApplication())
{
var neededSpace = 5242880
if (store.IncreaseQuotaTo(
store.AvailableFreeSpace + neededSpace
))
{
...
}
}
D. using (var store = IsolatedStorageFile.GetUserStoreForApplication())
{
var neededSpace = 5242880
if (store.IncreaseQuotaTo(
store.UsedSize + neededSpace
))
{
...
}
}
Answer: D

Microsoft   70-506 pdf   70-506시험문제   70-506 pdf

NO.11 You are developing a Silverlight 4 application. You define an Invoice object according to the following
code segment.
public class Invoice
{
public int InvoiceId { get
set
}
public double Amount { get
set
}
public Supplier Supplier { get
set
}
public DateTime InvoiceDate { get
set
}
public DateTime PayDate { get
set
}
public string InvoiceDescription { get
set
}
}
You need to display a list of invoices that have the following properties displayed on each line: InvoiceId,
Amount, and InvoiceDate.
Which XAML fragment should you use?
A. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ListBox>
B. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceId}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=Amount}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceDate}" />
</ListBoxItem>
</StackPanel>
</ListBox>
C. <ListBox x:Name="InvoiceListBox">
<ListBox.Items>
<ItemsPanelTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ItemsPanelTemplate>
</ListBox.Items>
</ListBox>
D. <ListBox x:Name="InvoiceListBox">
<ListBox.ItemTemplate>
<DataTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</DataTemplate>
</ListBox.ItemTemplate>
</ListBox>
Answer: D

Microsoft dump   70-506   70-506 dumps   70-506   70-506

NO.12 You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
The application contains the following XAML fragment.
<TextBlock x:Name="QuoteOfTheDay" />
The application calls a Windows Communication Foundation (WCF) service named MyService that
returns the quote of the day and assigns it to the QuoteOfTheDay TextBlock.
The application contains the following code segment. (Line numbers are included for reference only.)
01 var client = new MyService.MyServiceClient()
02 client.GetQuoteOfTheDayCompleted += (s, args) => QuoteOfTheDay.Text = args.Result
03 client.GetQuoteOfTheDayAsync()
You need to handle errors that might occur as a result of the service call. You also need to provide a
default value of "Unavailable" when an error occurs.
Which code segment should you replace at lines 02 and 03?
A. QuoteOfTheDay.Text = "Unavailable"
client.GetQuoteOfTheDayCompleted += (s, args) => QuoteOfTheDay.Text = args.Result
client.GetQuoteOfTheDayAsync()
B. client.GetQuoteOfTheDayCompleted += (s, args) =>
{
if (args.Result != null)
{
QuoteOfTheDay.Text = args.Result
}
else
{
QuoteOfTheDay.Text = "Unavailable"
}
}
client.GetQuoteOfTheDayAsync()
C. client.GetQuoteOfTheDayCompleted += (s, args) => QuoteOfTheDay.Text = args.Result
try
{
client.GetQuoteOfTheDayAsync()
}
catch (Exception ex)
{
// TODO: handle exception
QuoteOfTheDay.Text = "Unavailable"
}
D. client.GetQuoteOfTheDayCompleted += (s, args) =>
{
if (args.Error == null)
{
QuoteOfTheDay.Text = args.Result
}
else
{
// TODO: handle error
QuoteOfTheDay.Text = "Unavailable"
}
}
client.GetQuoteOfTheDayAsync()
Answer: D

Microsoft dump   70-506시험문제   70-506 pdf   70-506자료

NO.13 }

NO.14 You are developing a Silverlight 4 application.
The application contains an XAML page that defines the following Grid control.
<Grid Name="gridBody" >
<Grid.RowDefinitions>
<RowDefinition />
<RowDefinition />
</Grid.RowDefinitions>
<TextBlock Text="Employee Info" />
<TextBlock Text="Please enter employee info" Grid.Row="1" Height="20" VerticalAlignment="Top" />
<TextBox x:Name="EmpInfo" Grid.Row="1" Margin="0,25,0,0" TextWrapping="Wrap" />
...
</Grid>
The codebehind file for myPage.xaml contains the following code segment. (Line numbers are included
for reference only.)
01 public myPage()
02 {
03 InitializeComponent()
04
05 UserControl control = new MyCustomControl()
06
07 }
You need to replace the contents of the second row of gridBody with a user control of the
MyCustomControl type.
Which code segment should you insert at line 06?
A. gridBody.Children.Insert(1, control)
B. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions[1])
gridBody.Children.Insert(1, control)
C. gridBody.Children.Clear()
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
D. List<UIElement> remove = gridBody.Children.Where(c => c is FrameworkElement &&
Grid.GetRow((FrameworkElement)c) == 1).ToList()
foreach (UIElement element in remove)
{
gridBody.Children.Remove(element)
}
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
Answer: D

Microsoft   70-506 dump   70-506   70-506

NO.15 You are developing a Silverlight 4 application.
You have a collection named ColPeople of the List<Person> type. You define the Person class according
to the following code segment.
public class Person
{
public string Name {get
set }
public string Description { get
set
}
public string Gender { get
set
}
public int Age { get
set
}
public int Weight { get
set
}
}
You need to bind ColPeople to a ComboBox so that only the Name property is displayed.
Which XAML fragment should you use?
A. <ComboBox DataContext="{Binding ColPeople}" ItemsSource="{Binding ColPeople}"
DisplayMemberPath="Name" />
B. <ComboBox DataContext="{Binding Person}" ItemsSource="{Binding Person}"
DisplayMemberPath="ColPeople" />
C. <ComboBox DataContext="{Binding ColPeople}" DisplayMemberPath="Name" />
D. <ComboBox DataContext="{Binding Person}" />
Answer: A

Microsoft시험문제   70-506   70-506인증   70-506 dumps

NO.16 You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4. The
application has a TextBox control named txtName.
You need to handle the event when txtName has the focus and the user presses the F2 key.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. txtName.KeyDown += new KeyEventHandler(txtName_KeyDown)
B. txtName.LostFocus += new RoutedEventHandler(txtName_LostFocus)
C. txtName.TextChanged += new TextChangedEventHandler(txtName_TextChanged)
D. void txtName_TextChanged(object sender, TextChangedEventArgs e)
{
if ((Key)e.OriginalSource == Key.F2)
{
//Custom logic
}
}
E. void txtName_KeyDown(object sender, KeyEventArgs e)
{
if (e.Key == Key.F2)
{
//Custom logic
}
}
F. void txtName_LostFocus(object sender, RoutedEventArgs e)
{
if ((Key)e.OriginalSource == Key.F2)
{
//Custom logic
}
}
Answer: A, E

Microsoft자료   70-506   70-506   70-506

NO.17 }

NO.18 You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You create a new user control in the application. You add the following XAML fragment to the control.
<StackPanel KeyDown="App_KeyDown"
Orientation="Vertical">
<TextBox x:Name="firstName" />
<TextBox x:Name="lastName" />
<TextBox x:Name="address" />
</StackPanel>
You add the following code segment in the codebehind file of the control. (Line numbers are included for
reference only.)
01 private void App_KeyDown(object sender, KeyEventArgs e)
02 {
03
04 }
05
06 private void FirstAndLastNameKeyDown()
07 {
08...
09 }
You need to ensure that the FirstAndLastNameKeyDown method is invoked when a key is pressed while
the focus is on the firstName or lastName TextBox controls. You also need to ensure that the default
behavior of the controls remains unchanged.
Which code segment should you add at line 03?
A. if (((FrameworkElement)sender).Name == "firstName" ||
((FrameworkElement)sender).Name == "lastName")
{
FirstAndLastNameKeyDown()
}
e.Handled = false
B. if (((FrameworkElement)sender).Name == "firstName" ||
((FrameworkElement)sender).Name == "lastName")
{
FirstAndLastNameKeyDown()
}
e.Handled = true
C. if (((FrameworkElement)e.OriginalSource).Name == "firstName" ||
((FrameworkElement)e.OriginalSource).Name == "lastName")
{
FirstAndLastNameKeyDown()
}
e.Handled = false
D. if (((FrameworkElement)e.OriginalSource).Name == "firstName" ||
((FrameworkElement)e.OriginalSource).Name == "lastName")
{
FirstAndLastNameKeyDown()
}
e.Handled = true
Answer: C

Microsoft시험문제   70-506최신덤프   70-506 dumps

NO.19 private void worker_ProgressChanged(object sender, ProgressChangedEventArgs e)

NO.20 You are developing a Silverlight 4 application.
The application defines the following XAML fragment. (Line numbers are included for reference only.)
01 <ComboBox>
02 <ComboBoxItem Content="Item 1" />
03 <ComboBoxItem Content="Item 2" />
04 <ComboBoxItem Content="Item 3" />
05 </ComboBox>
The codebehind file contains the following code segment. (Line numbers are included for reference only.)
06 void PrintText(object sender, SelectionChangedEventArgs args){
07
08 MessageBox.Show( "You selected " + cbi.Content.ToString() + ".")
09 }
You need to ensure that when the user selects an item in a ComboBox control, the content of the item is
displayed.
What should you do?
A. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
ComboBoxItem cbi = ((sender as ComboBox).SelectedItem as ComboBoxItem)
B. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
ComboBoxItem cbi = ((sender as ComboBox).SelectedIndex as ComboBoxItem)
C. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
ComboBoxItem cbi = ((sender as ComboBox).SelectedItem as ComboBoxItem)
D. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
ComboBoxItem cbi = ((sender as ComboBox).SelectedIndex as ComboBoxItem)
Answer: A

Microsoft   70-506 dump   70-506

ITexamdump의 156-915.76덤프의 VCE테스트프로그램과 700-039덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 642-384시험에 대비한 고품질 덤프와 1Z0-807시험 최신버전덤프를 제공해드립니다. 최고품질 ICBB시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-506.html