2013년 11월 21일 목요일

OMG UM0-300 인증 덤프

ITExamDump의 완벽한 OMG인증 UM0-300덤프는 고객님이OMG인증 UM0-300시험을 패스하는 지름길입니다. 시간과 돈을 적게 들이는 반면 효과는 십점만점에 십점입니다. ITExamDump의 OMG인증 UM0-300덤프를 선택하시면 고객님께서 원하시는 시험점수를 받아 자격증을 쉽게 취득할수 있습니다.

ITExamDump는 여러 it인증에 관심 있고 또 응시하고 싶으신 분들에게 편리를 드립니다. 그리고 많은 분들이 이미 ITExamDump제공하는 덤프로 it인증시험을 한번에 패스를 하였습니다. 즉 우리 ITExamDump 덤프들은 아주 믿음이 가는 보장되는 덤프들이란 말이죠. ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이OMG인증UM0-300시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이OMG인증UM0-300시험에 많은 도움이UM0-300될 것입니다. ITExamDump 가 제공하는UM0-300테스트버전과 문제집은 모두UM0-300인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에UM0-300시험을 패스하실 수 있습니다.

ITExamDump에서 제공해드리는 OMG인증 UM0-300덤프는 가장 출중한OMG인증 UM0-300시험전 공부자료입니다. 덤프품질은 수많은 IT인사들로부터 검증받았습니다. OMG인증 UM0-300덤프뿐만아니라 ITExamDump에서는 모든 IT인증시험에 대비한 덤프를 제공해드립니다. IT인증자격증을 취득하려는 분들은ITExamDump에 관심을 가져보세요. 구매의향이 있으시면 할인도 가능합니다. 고득점으로 패스하시면 지인분들께 추천도 해주실거죠?

시험 번호/코드: UM0-300
시험 이름: OMG (Omg-Certified uml professional advanded exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 134 문항
업데이트: 2013-11-20

OMG 인증 UM0-300시험에 도전해보려고 결정하셨다면 ITExamDump덤프공부가이드를추천해드립니다. ITExamDump덤프는 고객님께서 필요한것이 무엇인지 너무나도 잘 알고 있답니다. ITExamDump의 OMG 인증 UM0-300덤프는OMG 인증 UM0-300시험을 쉽게 만듭니다.

ITExamDump의 OMG인증 UM0-300덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 OMG인증 UM0-300덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희OMG인증 UM0-300덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.

ITExamDump는 유일하게 여러분이 원하는OMG인증UM0-300시험관련자료를 해결해드릴 수 잇는 사이트입니다. ITExamDump에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.

UM0-300 덤프무료샘플다운로드하기: http://www.itexamdump.com/UM0-300.html

NO.1 Which action can continue to be enabled after it executes?
A. ReplyAction
B. ReadExtentAction
C. AcceptEventAction
D. BroadcastSignalAction
E. StartOwnedBehaviorAction
Answer: C

OMG   UM0-300덤프   UM0-300   UM0-300   UM0-300기출문제

NO.2 A ReplyAction always follows what action?
A. ReadExtentAction
B. AcceptCallAction
C. AcceptEventAction
D. CreateLinkObjectAction
E. StartOwnedBehaviorAction
Answer: B

OMG기출문제   UM0-300   UM0-300자료   UM0-300

NO.3 What happens to the exception from a RaiseExceptionAction when used in a model that has no
exception parameters declared?
A. ignored
B. handled by a default handler
C. appended to an exception log
D. sent to the "ExceptionManager" object
E. propagated to an enclosing protected node, if any
Answer: E

OMG   UM0-300   UM0-300

NO.4 What is a power type?
A. classifier containing a very large number of instances
B. classifier whose instances are objects of another classifier
C. classifier whose instances are operations of another classifier
D. classifier whose instances are subclasses of another classifier
Answer: D

OMG   UM0-300   UM0-300   UM0-300

NO.5 An association class possesses the properties of which elements? (Choose two)
A. class
B. interface
C. constraint
D. expression
E. association
Answer: AE

OMG   UM0-300   UM0-300   UM0-300   UM0-300

NO.6 What characteristics of components best enable them to be used to represent diverse and
"large-scale" aspects of information processing environments?
A. black-box semantics
B. ports, parts, and interfaces
C. duality of association ends and attributes
D. ownership of potentially large numbers of model elements
Answer: D

OMG자료   UM0-300인증   UM0-300기출문제   UM0-300

NO.7 How is a power type indicated in a diagram?
A. as a classifier labeled <<powerType>>
B. as an association line labeled <<powerType>>
C. as a generalization set labeled <<powerType>>
D. as a generalization set labeled with a colon followed by a classifier name
E. as a generalization set labeled with a colon followed by the label <<powerType>>
Answer: D

OMG자료   UM0-300 pdf   UM0-300최신덤프   UM0-300기출문제   UM0-300자료

NO.8 What does a port specification on a trigger do?
A. send a request to a port
B. create a new port after a classifier has been instantiated
C. restrict the trigger to events arriving through a specific port
D. delay the creation of the parts of an encapsulated classifier until a specified request is received
Answer: C

OMG인증   UM0-300   UM0-300   UM0-300   UM0-300

NO.9 What is NOT possible when a classifier receives a request via one of its ports?
A. A new port is created on the classifier.
B. A behavior of the classifier is invoked.
C. The request is forwarded to a part of the classifier.
D. The request does not trigger any behavior and is not forwarded.
E. The port routes the request to one of a number of parts depending on the content of the request.
Answer: A

OMG   UM0-300 pdf   UM0-300   UM0-300 dumps

NO.10 An employee inadvertently removed all of the ownedMembers of the new BoosterMotor component
from his company's development repository. The next day, the manager was unable to find some pieces
of the BoosterMotor component's specification. What pieces could the manager no longer find? (Choose
two)
A. failure mode use cases
B. the component repository
C. test scripts for the rocket sled simulation
D. the launch assembly housing the BoosterMotor
E. the component's isIndirectlyInstantiated attribute
Answer: AC

OMG   UM0-300   UM0-300   UM0-300

NO.11 What does the composite structure notation show in the exhibit?
A. p is a hidden port.
B. p is a behavior port.
C. p is a port providing a system service.
D. p is a port on a part of composite C, which is not shown.
Answer: A

OMG   UM0-300자료   UM0-300   UM0-300최신덤프

NO.12 What is the correct interpretation for the multiplicities in the exhibit?
A. each Company has one Job, where each Job has one employee
B. each Job is for one employer and one employee, each Company has any number of employees and
each Person has any number of employers
C. each Person has at most one Job for any number of Company objects and each Company has at most
one Job for any number of Person objects
D. each Job has any number of employers and any number of employees, each Company has any
number of employees, and each Person has any number of employers
Answer: B

OMG최신덤프   UM0-300최신덤프   UM0-300자료   UM0-300덤프   UM0-300시험문제

NO.13 Which action does NOT require classifiers as static inputs?
A. ReadExtentAction
B. CreateObjectAction
C. ReclassifyObjectAction
D. StartOwnedBehaviorAction
E. ReadIsClassifiedObjectAction
Answer: D

OMG   UM0-300 dumps   UM0-300인증   UM0-300   UM0-300

NO.14 What is wrong with the collaboration occurrence shown in the exhibit?
A. The <<role>> keywords are missing.
B. The <<occurrence>> keyword is missing.
C. Client and Server role names should be underlined.
D. Role bindings should be represented by dashed lines.
E. The collaboration occurrence name should be underlined.
Answer: D

OMG dumps   UM0-300최신덤프   UM0-300

NO.15 In the exhibit, how many links are created by default when an instance of A is created?
A. two
B. four
C. eight
D. none
Answer: B

OMG   UM0-300   UM0-300

NO.16 Which stereotype is used on a dashed arrow joining an instance value to a constructor?
A. <<new>>
B. <<make>>
C. <<create>>
D. <<construct>>
E. <<initialize>>
Answer: C

OMG자격증   UM0-300 dumps   UM0-300 pdf   UM0-300

NO.17 When a component is deleted, what happens to objects in a component's namespace?
A. objects are deleted
B. objects continue to exist
C. only those objects that participate in shared aggregations are retained
D. contents of the component's namespace are promoted to its superclass
Answer: A

OMG최신덤프   UM0-300 dump   UM0-300   UM0-300

NO.18 What does a collaboration occurrence describe?
A. a particular aspect of a collaboration
B. an object that is an instance of a collaboration
C. a collaboration that contains a set of actual instances (as opposed to roles)
D. the instantiation of the pattern specified by the corresponding collaboration
Answer: D

OMG인증   UM0-300 dump   UM0-300 dumps   UM0-300 pdf   UM0-300

NO.19 Which situations would result in errors when executing a ReclassifyObjectAction on an object?
(Choose two)
A. No new classifiers are supplied.
B. A new classifier is an abstract class.
C. The old and new classifiers are identical.
D. All classifiers are removed from the object.
E. A new classifier already classifies the object.
F. An old classifier does not already classify the object.
Answer: BD

OMG   UM0-300시험문제   UM0-300   UM0-300시험문제

NO.20 By what means can a design document be associated with the component it describes? (Choose
three)
A. import
B. inheritance
C. ownership
D. dependency
E. power types
F. association end subsets
Answer: ACD

OMG   UM0-300자료   UM0-300인증

ITexamdump의 C_TSCM62_65덤프의 VCE테스트프로그램과 3I0-012덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP0-J67시험에 대비한 고품질 덤프와 70-561시험 최신버전덤프를 제공해드립니다. 최고품질 100-101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/UM0-300.html

댓글 없음:

댓글 쓰기